Rated for 500 A with a current range rating of 10 to 120%, this DC current shunt connects to DC power meters to measure current through a calibrated low-voltage drop with 0.1% accuracy. Ideal for renewable energy systems, mass transit, battery charging, and OEM integration applications.
Rated for 500 A with a current range rating of 10 to 120%, this DC current shunt connects to DC power meters to measure current through a calibrated low-voltage drop with 0.1% accuracy. Ideal for renewable energy systems, mass transit, battery charging, and OEM integration applications.
Accuenergy DC current shunts are engineered for precision measurement in DC current systems. Shunts are designed to measure electrical currents based on a small voltage drop created across a high-precision resistor placed in series with a load. When connected to a DC power meter, DC current shunts provide accurate energy measurements in a variety of applications including renewable energy, mass transit, battery charging, electric vehicles, welding, heavy industrial environments, and OEM applications.
Caractéristiques
Applications
| Current | |
| Rating | 500 A |
| Current Range | 10 to 120% of rated current |
| Accuracy | 0.1% |
| Voltage Drop | 75 mV |
| Mechanical and Environmental | |
| Form Factor | Inline installation |
| Exterior Dimensions | 4.72 x 1.77 x 0.16" (120 x 45 x 4 mm) |
| Case Material | Manganin Alloy |
| Operating Temperature | -40°F to 176°F (-40 to 80°C) |
| Shunt Temperature w/ Load Current | <80% of rated current = 176°F (80°C), >120% = of rated current = 248°F (120°C) |
| Storage Temperature | -67 to 185°F (-55 to 85°C) |
| Operating Humidity | Non-condensing, 0 to 95% RH |
| Installation Conditions | Indoor Use |
| Electrical | |
| Frequency Range | DC |
| Safety and Compliance | |
| Overload | 120% of nominal current (2 hours) |
| Certifications | RoHS |
| Current | |
| Rating | 500 A |
| Current Range | 10 to 120% of rated current |
| Accuracy | 0.1% |
| Voltage Drop | 75 mV |
| Mechanical and Environmental | |
| Form Factor | Inline installation |
| Exterior Dimensions | 4.72 x 1.77 x 0.16" (120 x 45 x 4 mm) |
| Case Material | Manganin Alloy |
| Operating Temperature | -40°F to 176°F (-40 to 80°C) |
| Shunt Temperature w/ Load Current | <80% of rated current = 176°F (80°C), >120% = of rated current = 248°F (120°C) |
| Storage Temperature | -67 to 185°F (-55 to 85°C) |
| Operating Humidity | Non-condensing, 0 to 95% RH |
| Installation Conditions | Indoor Use |
| Electrical | |
| Frequency Range | DC |
| Safety and Compliance | |
| Overload | 120% of nominal current (2 hours) |
| Certifications | RoHS |
