Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

3948 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

3948 COMMENTAIRES

Hanna FC2323 Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector

Modèle: FC2323 | No. de commande: FC 2323

Hanna FC2323 Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector-

Plus de produits Hanna

Demander à un expert

Hanna FC2323 Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector

Modèle: FC2323 | No. de commande: FC 2323

The amplified single junction pH electrode has a built-in temperature sensor and connects to the meter with a DIN connector.

The amplified single junction pH electrode has a built-in temperature sensor and connects to the meter with a DIN connector.

Prix spécial $350.55 CAD
Prix régulier $369.00 CAD
Disponibilité 3 Jours
Quantité

Accessoires recommandées

Hanna HI7007L Solution d'étalonnage, pH 7.01, 500 mL-

Hanna HI7007L Solution d'étalonnage, pH 7.01, 500 mL

HI7007L

Hanna FC230B Stainless Steel Blade for Meat pH Electrodes-

Hanna FC230B Stainless Steel Blade for Meat pH Electrodes

FC098

Hanna HI70630L Grease and Fats Acid Cleaning Solution, 500 mL-

Hanna HI70630L Grease and Fats Acid Cleaning Solution, 500 mL

HI70630L

Hanna HI70631L Grease and Fats Alkaline Cleaning Solution, 500 mL-

Hanna HI70631L Grease and Fats Alkaline Cleaning Solution, 500 mL

HI70631L

Hanna FC099 Stainless Steel Blade for Meat pH Electrodes-

Hanna FC099 Stainless Steel Blade for Meat pH Electrodes

FC099

Hanna FC2323 Offers

This design consideration is ideal for pH measurements in meat and semi-frozen food samples. The recommended operating temperature range is from 0 to 50°C.

Features

  • Low Temperature Glass- the glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose with a resistance of about 100 megaohms
  • Stainless Steel Piercing Blade- an optional stainless steel blade is attached to the probe for easy meat penetration, even in frozen samples
  • Open Junction- this interface not only prevents silver from entering the sample, but also make it impermeable to clogging, resulting in a fast response and stable readings
  • Low Temperature Glass Formulation- the glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose with a resistance of about 100 megaohms
  • Conical Glass Tip- the colonical shaped tip design that allows for penetration into solids, and emulsions for the direct measurement in pH in food products
  • PVDF Body- polyvinylidene fluoride is a food grade plastic that is resistant to most chemicals and solvents, including sodium hypochlorite
  • Quick Connect DIN Connector- can only be used with the HI98140, HI98150, HI98230, and HI98240 portable meters

Are you Making Errors when Measuring pH?

  • Storing the Electrode Dry
  • Wiping the Sensing Glass
  • Storing the Electrode in DI Water
  • Not Cleaning the Electrode
  • Calibration Errors
  • Electrode Selection
  • Not Loosening or Removing the Fill Hole Cap
  • Electrolyte Fill Level
  • Inadequate Probe Submersion
  • Using an Old or Expired Electrode

Five Tips for Calibrating your pH Meter

  • Always Read your Manual
  • Make Sure you Have the Right pH Buffers
  • Calibrate Often
  • Be Aware of your Slope and Offset
  • Electrode Care

Hanna FC2323 Specifications

Body Material PVDF
Reference single, Ag/AgCl
Junction / Flow Rate open
Electrolyte viscolene
Range pH: 0 to 12
Max Pressure 0.1 bar
Tip Shape conic (6 x 10 mm)
Diameter 6 mm

Le Hanna FC2323 comprend

  • Hanna FC2323 Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Hanna FC2323 Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector.

Hanna HI70300L Solution de stockage d'électrode, 500 mL HI70300L
Une solution de stockage préparée avec des produits chimiques de qualité réactif qui peut être utilisée pour assurer une performance optimale de vos électrodes pH et ORP. Il est nécessaire de stocker une électrode de pH dans une solution afin de maintenir la membrane de verre de l'électrode de pH hydratée.



Hanna HI7010L Solution d'étalonnage pH, 10.01, 500 ml HI7010L
Solution tampon d'étalonnage avec un pH de 10.01. Le numéro de lot et la date de péremption sont clairement indiqués sur l'étiquette, avec une fermeture hermétique et inviolable, afin de garantir la qualité de la solution. La gamme de tampons d'étalonnage Hanna a été spécialement formulée pour avoir une expiration de 2 ans à partir de la date de fabrication pour une bouteille non ouverte.



Hanna HI7007L Solution d'étalonnage, pH 7.01, 500 mL HI7007L
Solution tampon d'étalonnage avec un pH de 7.01. Le numéro de lot et la date de péremption sont clairement indiqués sur l'étiquette, avec une fermeture hermétique et inviolable, afin de garantir la qualité de la solution. La gamme de tampons d'étalonnage Hanna a été spécialement formulée pour avoir une expiration de 2 ans à partir de la date de fabrication pour une bouteille non ouverte.



Hanna HI70630L Grease and Fats Acid Cleaning Solution, 500 mL HI70630L
Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. This acidic cleaning solution is specially formulated to use in applications in which the pH electrode can be coated with grease and fats.



Hanna HI70631L Grease and Fats Alkaline Cleaning Solution, 500 mL HI70631L
Effective alkaline cleaning solution that is specially formulated for use in applications where a pH electrode can be coated with grease and fats. Eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and or stored incorrectly.



Hanna FC230B Stainless Steel Blade for Meat pH Electrodes FC098
Stainless steel blade for piercing meat with a pH electrode. This blade measures 20 mm (0.8") long and screws on the compatible Hanna Instruments pH electrodes designed for meat analysis.



Hanna FC099 Stainless Steel Blade for Meat pH Electrodes FC099
Stainless steel blade for piercing meat with a pH electrode. This blade measures 35 mm long and screws on the compatible Hanna Instruments pH electrodes designed for meat analysis.



Poser une question sur le Hanna FC2323 Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector

Hanna FC2323 Offers

This design consideration is ideal for pH measurements in meat and semi-frozen food samples. The recommended operating temperature range is from 0 to 50°C.

Features

  • Low Temperature Glass- the glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose with a resistance of about 100 megaohms
  • Stainless Steel Piercing Blade- an optional stainless steel blade is attached to the probe for easy meat penetration, even in frozen samples
  • Open Junction- this interface not only prevents silver from entering the sample, but also make it impermeable to clogging, resulting in a fast response and stable readings
  • Low Temperature Glass Formulation- the glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose with a resistance of about 100 megaohms
  • Conical Glass Tip- the colonical shaped tip design that allows for penetration into solids, and emulsions for the direct measurement in pH in food products
  • PVDF Body- polyvinylidene fluoride is a food grade plastic that is resistant to most chemicals and solvents, including sodium hypochlorite
  • Quick Connect DIN Connector- can only be used with the HI98140, HI98150, HI98230, and HI98240 portable meters

Are you Making Errors when Measuring pH?

  • Storing the Electrode Dry
  • Wiping the Sensing Glass
  • Storing the Electrode in DI Water
  • Not Cleaning the Electrode
  • Calibration Errors
  • Electrode Selection
  • Not Loosening or Removing the Fill Hole Cap
  • Electrolyte Fill Level
  • Inadequate Probe Submersion
  • Using an Old or Expired Electrode

Five Tips for Calibrating your pH Meter

  • Always Read your Manual
  • Make Sure you Have the Right pH Buffers
  • Calibrate Often
  • Be Aware of your Slope and Offset
  • Electrode Care
En savoir plus...

Hanna FC2323 Specifications

Body Material PVDF
Reference single, Ag/AgCl
Junction / Flow Rate open
Electrolyte viscolene
Range pH: 0 to 12
Max Pressure 0.1 bar
Tip Shape conic (6 x 10 mm)
Diameter 6 mm

Le Hanna FC2323 comprend

  • Hanna FC2323 Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Hanna FC2323 Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector.

Hanna HI70300L Solution de stockage d'électrode, 500 mL HI70300L
Une solution de stockage préparée avec des produits chimiques de qualité réactif qui peut être utilisée pour assurer une performance optimale de vos électrodes pH et ORP. Il est nécessaire de stocker une électrode de pH dans une solution afin de maintenir la membrane de verre de l'électrode de pH hydratée.



Hanna HI7010L Solution d'étalonnage pH, 10.01, 500 ml HI7010L
Solution tampon d'étalonnage avec un pH de 10.01. Le numéro de lot et la date de péremption sont clairement indiqués sur l'étiquette, avec une fermeture hermétique et inviolable, afin de garantir la qualité de la solution. La gamme de tampons d'étalonnage Hanna a été spécialement formulée pour avoir une expiration de 2 ans à partir de la date de fabrication pour une bouteille non ouverte.



Hanna HI7007L Solution d'étalonnage, pH 7.01, 500 mL HI7007L
Solution tampon d'étalonnage avec un pH de 7.01. Le numéro de lot et la date de péremption sont clairement indiqués sur l'étiquette, avec une fermeture hermétique et inviolable, afin de garantir la qualité de la solution. La gamme de tampons d'étalonnage Hanna a été spécialement formulée pour avoir une expiration de 2 ans à partir de la date de fabrication pour une bouteille non ouverte.



Hanna HI70630L Grease and Fats Acid Cleaning Solution, 500 mL HI70630L
Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. This acidic cleaning solution is specially formulated to use in applications in which the pH electrode can be coated with grease and fats.



Hanna HI70631L Grease and Fats Alkaline Cleaning Solution, 500 mL HI70631L
Effective alkaline cleaning solution that is specially formulated for use in applications where a pH electrode can be coated with grease and fats. Eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement and or stored incorrectly.



Hanna FC230B Stainless Steel Blade for Meat pH Electrodes FC098
Stainless steel blade for piercing meat with a pH electrode. This blade measures 20 mm (0.8") long and screws on the compatible Hanna Instruments pH electrodes designed for meat analysis.



Hanna FC099 Stainless Steel Blade for Meat pH Electrodes FC099
Stainless steel blade for piercing meat with a pH electrode. This blade measures 35 mm long and screws on the compatible Hanna Instruments pH electrodes designed for meat analysis.



Poser une question sur le Hanna FC2323 Foodcare pH Electrode for Meat Products with Quick Connect DIN Connector

Plus de produits Hanna



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.