Hanna HI70630L Offers

The Cleaning Solution Series ensures maximum efficiency and accuracy of your sensors when used for it's designated application. Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. The HI70630L is a cleaning solution made specifically for applications that involve the measurement of pH in a meat grease or fats-based solution.

Features

• Specially formulated cleaning solution to remove meat grease and fats from pH electrode
• Air tight bottle with tamper-proof seal to ensure quality
• Expiration date and lot number clearly marked on the bottle
• Hanna cleaning solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle

The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardization curve created during the calibration process will remain a valid reference until the next calibration.

Good to Know

• In time, particles during routine measurement can contaminate the sensor tip, mishandled and aged solutions can also be affected
• Your meter can still be calibrated even if the electrode sensor tip is not properly cleaned before calibration, if the contamination dissipates, the calibration is no longer valid and the readings are inaccurate
• A proper cleaning and fresh solutions ensures the whole surface of the sensor tip is reading correctly, ensuring an accurate calibration