The OFP-CFP-SI-W INTL OptiFiber Pro and CertiFiber Pro Singlemode kit with inspection is focused on reducing costs while enhancing productivity and improving network reliability. This is the wireless version and includes a WiFi adapter for LinkWare Live.
The OFP-CFP-SI-W INTL OptiFiber Pro and CertiFiber Pro Singlemode kit with inspection is focused on reducing costs while enhancing productivity and improving network reliability. This is the wireless version and includes a WiFi adapter for LinkWare Live.
Discontinué!
Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :
The OptiFiber® Pro OTDR elevates fiber optic testing with the industry's only smartphone interface that turns a technician into a fiber expert. The DataCenter OTDR configuration eliminates uncertainty and errors that occur when testing data center fiber. Its ultra-short dead zones enable testing of fiber patchcords in virtualized data centers. These capabilities, plus the fastest-in-the-industry trace times, make the OptiFiber Pro OTDR a must-have tool.
Caractéristiques
| Wavelengths | 1310 nm +/- 25 nm 1550 nm +/- 30 nm |
| Compatible Fiber Types | Singlemode |
| Event Dead Zone | 1310 nm: 0.6 m Typical 1550 nm: 0.6 m Typical |
| Attenuation Dead Zone | 1310 nm: 3.6 m Typical 1550 nm: 3.7 m Typical |
| Dynamic Range | 1310 nm: 32 dB Typical 1550 nm: 30 dB Typical |
| Max Distance range Setting | 130 km |
| Distance Measurement Range | 1310 nm: 80 km 1550 nm: 130 km |
| Reflectance Range | 1310 nm: -14 dB to -65 dB (Typical) 1550 nm: -14 dB to -65 dB (Typical) |
| Sample Resolution | 3 cm to 400 cm |
| Pulse Widths (Nominal) | 1310/1550 nm: 3, 10, 30, 100, 300, 1000, 3000, 10000, 20000 ns |
| Test Time (Per Wavelength) | Auto Setting: 10 sec (Typical) Quick Test Setting: 5 sec (Typical) Best Resolution Setting: 5 to 180 sec FaultMap Setting: 10 sec (Typical), 180 sec (Max) DataCenter OTDR Setting: 20 sec (Typical), 40 sec (Max) Manual Setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
| FiberInspector Probe | |
| Magnification | ~200X with OptiFiber Pro Display |
| Light Source | Blue LED |
| Power Source | Versiv Mainframe |
| Field of View (FOV) | Horizontal: 425 µm Vertical: 320 µm |
| Minimum Detectable Particle Size | 0.5 µm |
| Dimensions | Approximately 6.75" x 1.5" (1175 mm x 35 mm) Without Adapter Tip |
| Weight | 200 g |
| Temperature Range | Operating: 32 to 122°F (0 to +50°C) Storage: -4 to +158°F (-20 to +70°C) |
| Certifications | CE (when used with the mainframe) |
| VFL | |
| On/Off Control | Mechanical switch and a button on the touch screen |
| Output Power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating Wavelength | 650 nm Nominal |
| Spectral Width (RMS) | ±3 nm |
| Output Modes | Continuous Wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector Adapter | 2.5 mm Universal |
| Laser Safety (Classification) | Class II CDRH Complies to EN 60825-2 |
| Environmental specifications | |
| Operating temperature* | -10 to 45°C |
| Storage Temperature | -10 to +60°C |
| Operating Altitude | 4,000 m (13,123 ft) 3,200 m (10,500 ft) with AC Adapter |
| Storage Altitude | 12,000 m |
| EMC | EN 61326-1 |
| General Specifications | |
| Weight | Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg) |
| Dimensions | Mainframe with module and battery: 2.625 x 5.25 x 11.0" ( 6.67 x 13.33 x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery Life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Charge Time | Tester Off: Four hours to charge from 10% to 90% capacity Tester On: Six hours to charge from 10% to 90% capacity |
| Wavelengths | 1310 nm +/- 25 nm 1550 nm +/- 30 nm |
| Compatible Fiber Types | Singlemode |
| Event Dead Zone | 1310 nm: 0.6 m Typical 1550 nm: 0.6 m Typical |
| Attenuation Dead Zone | 1310 nm: 3.6 m Typical 1550 nm: 3.7 m Typical |
| Dynamic Range | 1310 nm: 32 dB Typical 1550 nm: 30 dB Typical |
| Max Distance range Setting | 130 km |
| Distance Measurement Range | 1310 nm: 80 km 1550 nm: 130 km |
| Reflectance Range | 1310 nm: -14 dB to -65 dB (Typical) 1550 nm: -14 dB to -65 dB (Typical) |
| Sample Resolution | 3 cm to 400 cm |
| Pulse Widths (Nominal) | 1310/1550 nm: 3, 10, 30, 100, 300, 1000, 3000, 10000, 20000 ns |
| Test Time (Per Wavelength) | Auto Setting: 10 sec (Typical) Quick Test Setting: 5 sec (Typical) Best Resolution Setting: 5 to 180 sec FaultMap Setting: 10 sec (Typical), 180 sec (Max) DataCenter OTDR Setting: 20 sec (Typical), 40 sec (Max) Manual Setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
| FiberInspector Probe | |
| Magnification | ~200X with OptiFiber Pro Display |
| Light Source | Blue LED |
| Power Source | Versiv Mainframe |
| Field of View (FOV) | Horizontal: 425 µm Vertical: 320 µm |
| Minimum Detectable Particle Size | 0.5 µm |
| Dimensions | Approximately 6.75" x 1.5" (1175 mm x 35 mm) Without Adapter Tip |
| Weight | 200 g |
| Temperature Range | Operating: 32 to 122°F (0 to +50°C) Storage: -4 to +158°F (-20 to +70°C) |
| Certifications | CE (when used with the mainframe) |
| VFL | |
| On/Off Control | Mechanical switch and a button on the touch screen |
| Output Power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating Wavelength | 650 nm Nominal |
| Spectral Width (RMS) | ±3 nm |
| Output Modes | Continuous Wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector Adapter | 2.5 mm Universal |
| Laser Safety (Classification) | Class II CDRH Complies to EN 60825-2 |
| Environmental specifications | |
| Operating temperature* | -10 to 45°C |
| Storage Temperature | -10 to +60°C |
| Operating Altitude | 4,000 m (13,123 ft) 3,200 m (10,500 ft) with AC Adapter |
| Storage Altitude | 12,000 m |
| EMC | EN 61326-1 |
| General Specifications | |
| Weight | Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg) |
| Dimensions | Mainframe with module and battery: 2.625 x 5.25 x 11.0" ( 6.67 x 13.33 x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery Life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Charge Time | Tester Off: Four hours to charge from 10% to 90% capacity Tester On: Six hours to charge from 10% to 90% capacity |
