Wear Yellow. Work Safe.
Reliable and easy to use, this single-gas detector monitors hydrogen sulfide (H2S) and provides affordable protection from atmospheric gas hazards and extended battery life, especially in cold weather. In addition, it features black concussion-proof housing and an IP68 rating for maximum protection against dust and water.
Reliable and easy to use, this single-gas detector monitors hydrogen sulfide (H2S) and provides affordable protection from atmospheric gas hazards and extended battery life, especially in cold weather. In addition, it features black concussion-proof housing and an IP68 rating for maximum protection against dust and water.
Easy to wear, slim, and compact, this gas detector has visual compliance at a glance with the flashing green IntelliFlash™. Moreover, the easy one-button operation reduces training time and lets workers focus on the job.
Caractéristiques
Applications
| H2S | Measuring range: 0 to 100 ppm Resolution: 1 ppm |
| Tests | Audible/visual alarms on activation; sensors, battery and circuitry (continuous) |
| Alarms | Visual, vibrating, audible (95 dB) Low, High, TWA, STEL, OL (over limit) |
| User Options | IntelliFlash™ interval Combustible gas measurement (%LEL or % by volume methane) User-settable calibration gas level Force calibration when overdue Low alarm acknowledge Language choices Set custom start-up message |
| Temperature | -4 to 122°F (-20 to 50°C) |
| Humidity | 0 to 95% RH (non-condensing) |
| Ratings | IP68 - up to 45 minutes at 3.9' (1.2 m) EMI/RFI: Complies with EMC Directive 2004/108/EC |
| Certifications and Approvals | CSA: Class I, Div. 1, Gr. A, B, C, D ATEX: CEEx, II 1 G. Ex ia IIC T4 Ga IECEx: Ex ia IIC T4 Ga CE European Conformity |
| Expected Service Lifetime | Five years including all sensors Note: Sensors do not contain consumable components and will typically reach the expected lifetime if used according to the instructions in the user manual |
| Typical Battery Life | 18 hours; recharges in less than 6 hours Note: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles |
| Dimensions | 4.4 x 2.4 x 1.2" (11.3 x 6 x 3.2 cm) |
| Weight | 6.3 oz (179 g) |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Honeywell BW MicroClip X3 Series Single-Gas Detector, H2S, black.
| H2S | Measuring range: 0 to 100 ppm Resolution: 1 ppm |
| Tests | Audible/visual alarms on activation; sensors, battery and circuitry (continuous) |
| Alarms | Visual, vibrating, audible (95 dB) Low, High, TWA, STEL, OL (over limit) |
| User Options | IntelliFlash™ interval Combustible gas measurement (%LEL or % by volume methane) User-settable calibration gas level Force calibration when overdue Low alarm acknowledge Language choices Set custom start-up message |
| Temperature | -4 to 122°F (-20 to 50°C) |
| Humidity | 0 to 95% RH (non-condensing) |
| Ratings | IP68 - up to 45 minutes at 3.9' (1.2 m) EMI/RFI: Complies with EMC Directive 2004/108/EC |
| Certifications and Approvals | CSA: Class I, Div. 1, Gr. A, B, C, D ATEX: CEEx, II 1 G. Ex ia IIC T4 Ga IECEx: Ex ia IIC T4 Ga CE European Conformity |
| Expected Service Lifetime | Five years including all sensors Note: Sensors do not contain consumable components and will typically reach the expected lifetime if used according to the instructions in the user manual |
| Typical Battery Life | 18 hours; recharges in less than 6 hours Note: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles |
| Dimensions | 4.4 x 2.4 x 1.2" (11.3 x 6 x 3.2 cm) |
| Weight | 6.3 oz (179 g) |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Honeywell BW MicroClip X3 Series Single-Gas Detector, H2S, black.
