Uni-Trend Technology UPO3502E offre

The multi-function, affordable desktop analysis tool that you need for all your higher-speed electronics development and debugging chores. The Uni-T UPO3000 series is an MSO-ready oscilloscope that grows with your requirements. Need to expand to digital signals? Add the UT-M15 Logic Probe and UPO3000-LA16 logic analyzer firmware upgrade and you'll have a full-featured MSO. Need advanced signal decoding? There are a variety of options to upgrade your MSO3000. CE, cETLus, and UKCA certified.

Caractéristiques

• Ultra Phosphor 2.0 display: 256-level grayscale display capability, timely reflecting the probability of the waveform's appearance and making the waveform change clearly visible
• Sample rate: 2.5 GSa/s per channel (interleave mode). It does not decrease across multiple channels. Digital channel: 1 GSa/s for full 16 channels
• Memory depth: 250 Mpts per channel. It does not split as you use more channels
• Waveform capture rate: 1,000,000 wfms/s in fast acquire mode, 200,000 wfms/s in normal acquisition
• Vertical scale: 1 mV/div to 10 V/div (1 MΩ), 1 mV/div to 1 V/div (50 Ω)
• Low noise floor: Allows for cleaner and more accurate measurement of small signals
• Multi-scopes 2.0 supports independent time base for each channel
• Waveform recording hardware function can store up to 120,000 frames
• FFT mode for frequency domain measurements: 4 Mpts Enhanced FFT (Waterfall Chart, Split screen, Configurable Frequency band, Multiple views, Multiple traces, and more)
• Waveform operation functions (+, −, ×, ÷ digital filtering, logic operation and advanced operation)
• Automatic measurement of 36 waveform parameters
• Full-memory real-time hardware triggering, including area triggering to capture occasional and complex signals. Rich trigger functions: Edge, pulse, video, slope, runt, over-amplitude pulse, delay, timeout, duration, setup/hold, Nth edge, and pattern trigger
• Extend your scope with options for protocol trigger and decoding functions: RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay and Bode Plot analysis
• More than just an oscilloscope, it also includes a 4-channel digital voltmeter and 5-channel, 7-bit digital frequency counter
• Rich XY-mode cursor measurement
• Can be controlled by SCPI standard protocols, Python, and Labview
• Built-in web server for remote and cross-platform operation
• 8" (20.3 cm) touch screen, 800x480
• Interfaces include: USB Device/Host, LAN, VGA, EXT Trigger, and AUX Out
• Certifications: cETLus, CE, RoHS, UKCA

Applications

• Classroom education
• Repair and maintenance
• Research and development
• Production line testing
• Circuit debugging