This high-resolution oscilloscope has a maximum bandwidth of 80 MHz, a maximum sampling rate of 1.25 GSa/s, and is equipped with 4 analog channels, with a memory depth of up to 100 Mpts.
This high-resolution oscilloscope has a maximum bandwidth of 80 MHz, a maximum sampling rate of 1.25 GSa/s, and is equipped with 4 analog channels, with a memory depth of up to 100 Mpts.
The High-Resolution UPO1000HD series adopts exclusive Ultra Phosphor 3.0 technology, achieving the waveform capture rate of up to 100,000 wfms/s, with 256 levels of gray temperature colors, and features an innovative digital trigger system with high trigger sensitivity and low jitter.
Caractéristiques
Double-sided slim design for a modern and compact factor
Dimensions28.2cm×17.5cm×4.9cm
UPO1000HD series adopts the latest Type-C power supply method. When no power source is available outdoors, it can be powered by a portable charger
12-bit high-resolution ADC sampling has a quantization level of up to 4096, which is 16 times that of a traditional 8-bit ADC, allowing for better restoration of waveform details.
Supports 8-channel parallel graph mapping, the processing rate is up to 20 Gbps, the waveform capture rate is up to 100,000 wfms/s, and up to 500,000 wfms/s in the sequence mode.
56 types of precise parameter automatic measurements covering multiple dimensions such as voltage, frequency, phase, and power. It also integrates advanced parameter statistics and trend graph visualization analysis functions, providing a comprehensive and multi-dimensional display of signal characteristic changes, achieving professional-level deep insights and efficient data interpretation.
Supports 5 types of mainstream protocols, including:
Input Analysis
Switching Analysis
Output Analysis
| Model Specifications | |
| Analog Bandwidth | 80 MHz |
| Calculated Rise Time (10 to 90% - typical) | ≤ 4 ns |
| Input/Output Channel Number | 4 analog channels |
| Sampling Mode | Real-time sampling |
| Acquisition Mode | Normal, peak detect, high resolution, averaging |
| Maximum Sample Rate | Analog channel: 1.25 GSa/s (single channel), 625 MSa/s (dual channels), 312.5MSa/s (four channel) |
| Average | After all channels have reached N samples simultaneously, the number ofNtimes can be selected from 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096,8192. |
| Memory Depth | Auto (limit to 5 Mpts), 25 kpts, 250 kpts, 500 kpts, 5 Mpts, 50 Mpts, 100Mpts |
| Maximum Waveform Capture Rate | 100,000 wfms/s 500,000 wfms/s (sequence mode) |
| Sequential Sampling | Maximum 500,000 frames, minimum two trigger intervals < 2000ns |
| Hardware Real-time Waveform Recording And Playing | 100,000 frames |
| Screen | 7 - inch 1024x600 HD capacitive touch screen |
| Vertical System (Analog Channel) | |
| Input Coupling | DC, AC, GND |
| Input Impedance | (1 MΩ ± 2%) || (17 pF ± 2 pF) |
| Probe Attenuation Factor | Voltage probe ratio: 0.001X, 0.01X, 0.1X, 1X, 10X, 100X, 1000X, Custom Current probe ratio: 5 mV/A, 10 mV/A, 50 mV/A, 100 mV/A, 200mV/A, 500 mV/A, 1V/A, Custom |
| Maximum Input Voltage | 400 V (DC+ACVpk) 135 VRMS |
| Vertical Resolution | 12-bit |
| Vertical Scale | 500 μV/div to 10 V/div |
| Offset Range | 500 μV/div to 50 mV/div: ± 2 V 51 mV/div to 1 V/div: ± 25 V 1.02 V/div to 10 V/div: ± 250 V Vertical offset reading: V |
| Band Limit (typical) | 20 MHz, Full |
| Low-frequency Response | (AC coupling, -3 dB); ≤ 5 Hz (on BNC) |
| DC Gain Accuracy | < 5 mV: ± 2% full scale, ≥ 5 mV: ± 1.5% full scale |
| DC Offset Accuracy | ± (2% + 0.1 div + 2 mV) |
| Unit | W, A, V, and U, default: V |
| Channel-to-channel Isolation (typical) | DC to maximum bandwidth: > 40 dB |
| Horizontal System (Analog Channel) | |
| Time Base Range | 5 ns/div to 1 ks/div (simultaneously display thecurrentsampling rate and memorydepth) |
| Time Base Accuracy | ± 25 ppm |
| Time Base Delay Time Range | Pre-trigger (negative delay): ≥ 1 screen width Post-trigger (positive delay): 1 s to 4 ks |
| Time Base Mode | Y-T (default) X-Y (CH1-CH2, CH1-CH3, CH1-CH4, CH2-CH3, CH2-CH4, CH3-CH4) Roll, time base ≥ 50 ms/div, using the horizontal rotary knob toenter orexitRoll mode Scan, time base ≥ 50 ms/div, user can select Roll or Scan mode |
| Trigger | |
| Trigger Sensitivity | CH1-CH4: ≤ 10 mV/div, The larger value of 1div or 5 mVpp > 10 mV/div, 0.5 div Enable the noise rejection, with trigger sensitivity reducing half Trigger sensitivity can be customized, with the default set to 50% |
| Trigger Level Range | Internal: ± 4 div from the center of the screen |
| Trigger Modes | Auto, Normal, Single |
| Trigger Holdoff Range | 0.0 ps to 10 s |
| Trigger Coupling (typ.) | DC: Allows all signals to pass AC: Blocks the DC component of the input signal HF reject: Suppresses high-frequency components of signals above40kHz LF reject: Suppresses low-frequency components of signals below40kHz |
| Noise Reject | Suppress the high-frequency noise of signal, to reduce the error-touchedpossibility Enable the noise rejection, with trigger sensitivity reducing half |
| Zone Triggering | |
| Zone | 2 zones; source: CH1-CH4; Feature: Must Intersect, Must Not Intersect |
| Edge | |
| Slope | Rising, Falling, Either |
| Source | CH1-CH4 |
| Runt | |
| Trigger Condition | >, <, ≤ ≥, None |
| Polarity | Positive, Negative |
| Pulse Width | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Window | |
| Polarity | Rising, Falling, Either |
| Trigger Condition | Enter, Exit, Time |
| Set | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Nth Edge | |
| Slope | Rising, Falling |
| Idle Timer | 6.4 ns to 10 s |
| Edge Number | 1 to 65535 |
| Source | CH1-CH4 |
| Delay | |
| Edge Type | Rising, Falling |
| Trigger Condition | >, <, ≤ ≥, > < |
| Delay Time | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Timeout | |
| Slope | Rising, Falling, Either |
| Timeout | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Duration | |
| Code Pattern | H, L, X |
| Trigger Condition | >, <, ≤ ≥ |
| Duration | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Setup and Hold | |
| Clock Edge | Rising, Falling |
| Data Type | H, L |
| Setup | 6.4 ns to 10 s |
| Hold | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Pulse Width | |
| Polarity | Positive, Negative |
| Trigger Condition | >, <, ≤ ≥ |
| Pulse Width | 1.6 ns to 4 s |
| Source | CH1-CH4 |
| Slope | |
| Slope | Positive, Negative |
| Trigger Condition | >, <, ≤ ≥ |
| Time | 3.2 ns to 1 s |
| Source | CH1-CH4 |
| Video | |
| Standard | PAL, NTSC, SECAM, 525 p/60, 625 p/50, 720 p/24, 720 p/25, 720p/30, 720p/50, 720 p/60, 1080 i/25, 1080 i/30, 1080 p/24, 1080 p/25, 1080p/30, 1080pfs/24 |
| Source | CH1-CH4 |
| Pattern | |
| Code Pattern | H, L, X, Rising, Falling |
| Source | CH1-CH4 |
| RS232/UART | |
| Trigger Condition | Start, StopBit, CheckErrr, Data |
| Baud Rate | 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600bps, 115200bps, custom |
| Data Bit | 5 bits, 6 bits, 7 bits, 8 bits |
| Source | CH1-CH4 |
| I2C | |
| Trigger Condition | Start, Restart, Stop, Loss, Address, Data, Address & Data |
| Addr Mode | 7 bits, 10 bits |
| Addr Range | 0 to 7F, 0 to 3 FF |
| Byte Length | 1 to 5 |
| Source | CH1-CH4 |
| SPI | |
| Mode | Timeout, CS |
| Trigger Condition | Start, Data |
| Timeout | 96 ns to 1 s |
| Data Bit | 4 bits to 32 bits |
| Source | CH1-CH4 |
| CAN | |
| Signal Type | CAN_H, CAN_L |
| Trigger Condition | Start, Data Frame, Remote Frame, Error Frame, Over-Load, Identifier, Data, Identifier&Data, End of Frame, Missing Ack, Biterror, CRC, Error, ALLErrors |
| Data Rate | 10 kbps, 19.2 kbps, 20 kbps, 33.3 kbps, 38.4 kbps, 50 kbps, 57.6kbps, 62.5kbps, 83.3 kbps, 100 kbps, 115.2 kbps, 125 kbps, 230.4 kbps, 250kbps, 490.8kbps, 500 kbps, 800 kbps, 921.6 kbps, 1 Mbps, 2 Mbps, 3 Mbps, 4Mbps, 5Mbps, custom |
| Source | CH1-CH4 |
| LIN | |
| Trigger Condition | Sync, Identifier, Data, Identifier & Data, Wake Frame, Sleep Frame, Error |
| Version | v1.x, v2.x, Either |
| Baud Rate | 1.2 kbps, 2.4 kbps, 4.8 kbps, 9.6 kbps, 10.417 kbps, 19.2 kbps, 20kbps, custom |
| Data Length | 1 to 8 |
| Source | CH1-CH4 |
| Decoding | |
| Number of Decodes | 4 |
| Decoding Type | Standard: RS232/UART, I2C, SPI CAN, LIN |
| Source | CH1-CH4 |
| Measurement | |
| Cursor | Voltage difference between cursors (△Y) Time difference between cursors (△X) Reciprocal of △X (Hz) (1/△X) Voltage and time of waveform point Display the cursor in the automatic measurement |
| Automatic Measurements | Analog channel: 56 kinds of parameter Maximum, Minimum, Top, Base, Amplitude, Middle, Peak-Peak, Average, Average-Cycles, RMS, RMS-Cycles, AC RMS, AC RMS-Cycles, Area, Area-Cycles, +Area, -Area, +Area-Cycles, -Area-Cycles, +Overshoot, -Overshoot, +Preshoot, -Preshoot, Period, Frequency, Rise time, Fall time, +Width, -Width, +Duty, -Duty, +Pulse count, -Pulse count, Risingedgecount,Falling edge count, Burst width, Burst Interval, Burst Period, Burst Per count,Ratio, Period Ratio, Setup time, Hold time, Setup & Hold Ratio, FRFR, FRFF, FFFR, FFFF, FRLF, FRLR, FFLR, FFLF, Delay(r-r), Delay(f-f),Phase(r-r), Phase(f-f) |
| Measurement Mode | Common measurement and accuracy measurement (Full memory hardwaremeasurements) |
| Measurement Type | Simultaneously display 21 kinds of parameter measurement |
| Measurement Range | Main time base, Zoom time base, Cursor area |
| Measurement Statistics | Mean, Maximum, Minimum, Std Dev, Count, Tendency chart, Bar Chart |
| XY Measurement | Time, Cartesian, Polar, Product, Ratio |
| Analysis | Frequency Counter, DVM, Pass/Fail, Waveform recording, Power Analysis |
| Power Analysis | |
| Measure | Power quality, Current harmonics, Surge current, Rds(on), SwitchingLoss, Conversion rate, Safe operating area, Modulation analysis, Output ripple, Startup/shutdown time, Transient response, Power efficiency |
| Histogram | |
| Source | CH1 to CH4 |
| Type | Horizontal, Vertical |
| Math | |
| Waveform Math | A+B, A-B, A×B, A÷B, Advanced, Filter |
| Filter | Low pass, High pass, Band pass, Band stop |
| Operation | 0,1,2,3,4,5,6,7,8,9 (+, -, *, /, ^, >, <, &&, ||, ==, !=) |
| Function | sin, cos, sinc, tan, sqrt, exp, lg, ln, floor, abs, acos, asin, atan, sinh, tanh, ceil, cosh, fabs, intg, diff, sign |
| FFT | |
| Channel Number | 4 |
| Window Types | Hanning, Hamming, Rectangle, Blackman |
| FFT Count | Up to 1 Mpts |
| FFT Vertical Scale | Vrms, dB |
| FFT | Waterfall: ON, OFF Spectrum range: Start frequency, Stop frequency, Center frequency, Span Four traces: Normal, Average, Max Hold, Min Hold Marker: Marker type, Marker Points, Marker list |
| Storage | |
| Setting | Set Status (.set) |
| Waveform | Waveform data (*.dat) (*.csv) (*.bsv) |
| Image | Image storage (*.bmp) (*.png) (*.jpg) |
| Report | Decoding Event List (*.csv) (*.pdf) (*.html) |
| DVM (typical) | |
| Source | Analog channel |
| Mode | DC, AC+DC RMS, AC RMS |
| Resolution | 4-bit |
| Buzzer | Beeps when the specified limit values are reached or exceeded |
| Frequency Counter | |
| Source | Any analog channel |
| Measurement | Frequency, Period, Totalizer |
| Counter | The maximum effective digits are 6, and the refresh time and effectivedigitsare adjustable. |
| Maximum Measurement Frequency | Maximum bandwidth of analog channel |
| Time Reference | Internal reference: ± 25 ppm |
| Interface | |
| USB-Host 2.0 | 1 on the front panel |
| USB-Device 2.0 | 1 on the rear panel |
| LAN | LAN (VXI11), 10/100 Base-T, RJ-45 |
| AUX Out | Trig Out, Pass/Fail, DVM |
| HDMI | 1 port for external display or projector |
| Probe Compensator Output | |
| Output Voltage | 3 Vpp |
| Frequency | 10 Hz ,100 Hz, 1 kHz (default), 10 kHz |
| Power Source | |
| Power Source | Power is greater than or equal to 12 V/3 A |
| Voltage | Supports Type-C or a portable charger with PD protocol |
| Power Consumption | 65 W Max |
| Fuse | 1.6 A |
| Environmental | |
| Temperature | Operating: 0℃ to +40℃ Non-operating: -20℃ to +60℃ |
| Cooling | Forced cooling by fan |
| Humidity | Operating: below +35 ℃, relative humidity ≤90％ Non-operating: +35 ℃ to +40 ℃, relative humidity ≤60％ |
| Altitude | Operating: below 3,000 meters; non-operating: below 15,000 meters |
| Pollution Degree | 2 |
| Operating Environment | Indoor |
| Mechanical Specifications | |
| Dimensions | 282 x 175 x 49 mm |
| Weight | 1.56 kg |
| Calibration Interval | |
| Calibration Interval | 1 year |
| Model Specifications | |
| Analog Bandwidth | 80 MHz |
| Calculated Rise Time (10 to 90% - typical) | ≤ 4 ns |
| Input/Output Channel Number | 4 analog channels |
| Sampling Mode | Real-time sampling |
| Acquisition Mode | Normal, peak detect, high resolution, averaging |
| Maximum Sample Rate | Analog channel: 1.25 GSa/s (single channel), 625 MSa/s (dual channels), 312.5MSa/s (four channel) |
| Average | After all channels have reached N samples simultaneously, the number ofNtimes can be selected from 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096,8192. |
| Memory Depth | Auto (limit to 5 Mpts), 25 kpts, 250 kpts, 500 kpts, 5 Mpts, 50 Mpts, 100Mpts |
| Maximum Waveform Capture Rate | 100,000 wfms/s 500,000 wfms/s (sequence mode) |
| Sequential Sampling | Maximum 500,000 frames, minimum two trigger intervals < 2000ns |
| Hardware Real-time Waveform Recording And Playing | 100,000 frames |
| Screen | 7 - inch 1024x600 HD capacitive touch screen |
| Vertical System (Analog Channel) | |
| Input Coupling | DC, AC, GND |
| Input Impedance | (1 MΩ ± 2%) || (17 pF ± 2 pF) |
| Probe Attenuation Factor | Voltage probe ratio: 0.001X, 0.01X, 0.1X, 1X, 10X, 100X, 1000X, Custom Current probe ratio: 5 mV/A, 10 mV/A, 50 mV/A, 100 mV/A, 200mV/A, 500 mV/A, 1V/A, Custom |
| Maximum Input Voltage | 400 V (DC+ACVpk) 135 VRMS |
| Vertical Resolution | 12-bit |
| Vertical Scale | 500 μV/div to 10 V/div |
| Offset Range | 500 μV/div to 50 mV/div: ± 2 V 51 mV/div to 1 V/div: ± 25 V 1.02 V/div to 10 V/div: ± 250 V Vertical offset reading: V |
| Band Limit (typical) | 20 MHz, Full |
| Low-frequency Response | (AC coupling, -3 dB); ≤ 5 Hz (on BNC) |
| DC Gain Accuracy | < 5 mV: ± 2% full scale, ≥ 5 mV: ± 1.5% full scale |
| DC Offset Accuracy | ± (2% + 0.1 div + 2 mV) |
| Unit | W, A, V, and U, default: V |
| Channel-to-channel Isolation (typical) | DC to maximum bandwidth: > 40 dB |
| Horizontal System (Analog Channel) | |
| Time Base Range | 5 ns/div to 1 ks/div (simultaneously display thecurrentsampling rate and memorydepth) |
| Time Base Accuracy | ± 25 ppm |
| Time Base Delay Time Range | Pre-trigger (negative delay): ≥ 1 screen width Post-trigger (positive delay): 1 s to 4 ks |
| Time Base Mode | Y-T (default) X-Y (CH1-CH2, CH1-CH3, CH1-CH4, CH2-CH3, CH2-CH4, CH3-CH4) Roll, time base ≥ 50 ms/div, using the horizontal rotary knob toenter orexitRoll mode Scan, time base ≥ 50 ms/div, user can select Roll or Scan mode |
| Trigger | |
| Trigger Sensitivity | CH1-CH4: ≤ 10 mV/div, The larger value of 1div or 5 mVpp > 10 mV/div, 0.5 div Enable the noise rejection, with trigger sensitivity reducing half Trigger sensitivity can be customized, with the default set to 50% |
| Trigger Level Range | Internal: ± 4 div from the center of the screen |
| Trigger Modes | Auto, Normal, Single |
| Trigger Holdoff Range | 0.0 ps to 10 s |
| Trigger Coupling (typ.) | DC: Allows all signals to pass AC: Blocks the DC component of the input signal HF reject: Suppresses high-frequency components of signals above40kHz LF reject: Suppresses low-frequency components of signals below40kHz |
| Noise Reject | Suppress the high-frequency noise of signal, to reduce the error-touchedpossibility Enable the noise rejection, with trigger sensitivity reducing half |
| Zone Triggering | |
| Zone | 2 zones; source: CH1-CH4; Feature: Must Intersect, Must Not Intersect |
| Edge | |
| Slope | Rising, Falling, Either |
| Source | CH1-CH4 |
| Runt | |
| Trigger Condition | >, <, ≤ ≥, None |
| Polarity | Positive, Negative |
| Pulse Width | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Window | |
| Polarity | Rising, Falling, Either |
| Trigger Condition | Enter, Exit, Time |
| Set | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Nth Edge | |
| Slope | Rising, Falling |
| Idle Timer | 6.4 ns to 10 s |
| Edge Number | 1 to 65535 |
| Source | CH1-CH4 |
| Delay | |
| Edge Type | Rising, Falling |
| Trigger Condition | >, <, ≤ ≥, > < |
| Delay Time | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Timeout | |
| Slope | Rising, Falling, Either |
| Timeout | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Duration | |
| Code Pattern | H, L, X |
| Trigger Condition | >, <, ≤ ≥ |
| Duration | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Setup and Hold | |
| Clock Edge | Rising, Falling |
| Data Type | H, L |
| Setup | 6.4 ns to 10 s |
| Hold | 6.4 ns to 10 s |
| Source | CH1-CH4 |
| Pulse Width | |
| Polarity | Positive, Negative |
| Trigger Condition | >, <, ≤ ≥ |
| Pulse Width | 1.6 ns to 4 s |
| Source | CH1-CH4 |
| Slope | |
| Slope | Positive, Negative |
| Trigger Condition | >, <, ≤ ≥ |
| Time | 3.2 ns to 1 s |
| Source | CH1-CH4 |
| Video | |
| Standard | PAL, NTSC, SECAM, 525 p/60, 625 p/50, 720 p/24, 720 p/25, 720p/30, 720p/50, 720 p/60, 1080 i/25, 1080 i/30, 1080 p/24, 1080 p/25, 1080p/30, 1080pfs/24 |
| Source | CH1-CH4 |
| Pattern | |
| Code Pattern | H, L, X, Rising, Falling |
| Source | CH1-CH4 |
| RS232/UART | |
| Trigger Condition | Start, StopBit, CheckErrr, Data |
| Baud Rate | 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600bps, 115200bps, custom |
| Data Bit | 5 bits, 6 bits, 7 bits, 8 bits |
| Source | CH1-CH4 |
| I2C | |
| Trigger Condition | Start, Restart, Stop, Loss, Address, Data, Address & Data |
| Addr Mode | 7 bits, 10 bits |
| Addr Range | 0 to 7F, 0 to 3 FF |
| Byte Length | 1 to 5 |
| Source | CH1-CH4 |
| SPI | |
| Mode | Timeout, CS |
| Trigger Condition | Start, Data |
| Timeout | 96 ns to 1 s |
| Data Bit | 4 bits to 32 bits |
| Source | CH1-CH4 |
| CAN | |
| Signal Type | CAN_H, CAN_L |
| Trigger Condition | Start, Data Frame, Remote Frame, Error Frame, Over-Load, Identifier, Data, Identifier&Data, End of Frame, Missing Ack, Biterror, CRC, Error, ALLErrors |
| Data Rate | 10 kbps, 19.2 kbps, 20 kbps, 33.3 kbps, 38.4 kbps, 50 kbps, 57.6kbps, 62.5kbps, 83.3 kbps, 100 kbps, 115.2 kbps, 125 kbps, 230.4 kbps, 250kbps, 490.8kbps, 500 kbps, 800 kbps, 921.6 kbps, 1 Mbps, 2 Mbps, 3 Mbps, 4Mbps, 5Mbps, custom |
| Source | CH1-CH4 |
| LIN | |
| Trigger Condition | Sync, Identifier, Data, Identifier & Data, Wake Frame, Sleep Frame, Error |
| Version | v1.x, v2.x, Either |
| Baud Rate | 1.2 kbps, 2.4 kbps, 4.8 kbps, 9.6 kbps, 10.417 kbps, 19.2 kbps, 20kbps, custom |
| Data Length | 1 to 8 |
| Source | CH1-CH4 |
| Decoding | |
| Number of Decodes | 4 |
| Decoding Type | Standard: RS232/UART, I2C, SPI CAN, LIN |
| Source | CH1-CH4 |
| Measurement | |
| Cursor | Voltage difference between cursors (△Y) Time difference between cursors (△X) Reciprocal of △X (Hz) (1/△X) Voltage and time of waveform point Display the cursor in the automatic measurement |
| Automatic Measurements | Analog channel: 56 kinds of parameter Maximum, Minimum, Top, Base, Amplitude, Middle, Peak-Peak, Average, Average-Cycles, RMS, RMS-Cycles, AC RMS, AC RMS-Cycles, Area, Area-Cycles, +Area, -Area, +Area-Cycles, -Area-Cycles, +Overshoot, -Overshoot, +Preshoot, -Preshoot, Period, Frequency, Rise time, Fall time, +Width, -Width, +Duty, -Duty, +Pulse count, -Pulse count, Risingedgecount,Falling edge count, Burst width, Burst Interval, Burst Period, Burst Per count,Ratio, Period Ratio, Setup time, Hold time, Setup & Hold Ratio, FRFR, FRFF, FFFR, FFFF, FRLF, FRLR, FFLR, FFLF, Delay(r-r), Delay(f-f),Phase(r-r), Phase(f-f) |
| Measurement Mode | Common measurement and accuracy measurement (Full memory hardwaremeasurements) |
| Measurement Type | Simultaneously display 21 kinds of parameter measurement |
| Measurement Range | Main time base, Zoom time base, Cursor area |
| Measurement Statistics | Mean, Maximum, Minimum, Std Dev, Count, Tendency chart, Bar Chart |
| XY Measurement | Time, Cartesian, Polar, Product, Ratio |
| Analysis | Frequency Counter, DVM, Pass/Fail, Waveform recording, Power Analysis |
| Power Analysis | |
| Measure | Power quality, Current harmonics, Surge current, Rds(on), SwitchingLoss, Conversion rate, Safe operating area, Modulation analysis, Output ripple, Startup/shutdown time, Transient response, Power efficiency |
| Histogram | |
| Source | CH1 to CH4 |
| Type | Horizontal, Vertical |
| Math | |
| Waveform Math | A+B, A-B, A×B, A÷B, Advanced, Filter |
| Filter | Low pass, High pass, Band pass, Band stop |
| Operation | 0,1,2,3,4,5,6,7,8,9 (+, -, *, /, ^, >, <, &&, ||, ==, !=) |
| Function | sin, cos, sinc, tan, sqrt, exp, lg, ln, floor, abs, acos, asin, atan, sinh, tanh, ceil, cosh, fabs, intg, diff, sign |
| FFT | |
| Channel Number | 4 |
| Window Types | Hanning, Hamming, Rectangle, Blackman |
| FFT Count | Up to 1 Mpts |
| FFT Vertical Scale | Vrms, dB |
| FFT | Waterfall: ON, OFF Spectrum range: Start frequency, Stop frequency, Center frequency, Span Four traces: Normal, Average, Max Hold, Min Hold Marker: Marker type, Marker Points, Marker list |
| Storage | |
| Setting | Set Status (.set) |
| Waveform | Waveform data (*.dat) (*.csv) (*.bsv) |
| Image | Image storage (*.bmp) (*.png) (*.jpg) |
| Report | Decoding Event List (*.csv) (*.pdf) (*.html) |
| DVM (typical) | |
| Source | Analog channel |
| Mode | DC, AC+DC RMS, AC RMS |
| Resolution | 4-bit |
| Buzzer | Beeps when the specified limit values are reached or exceeded |
| Frequency Counter | |
| Source | Any analog channel |
| Measurement | Frequency, Period, Totalizer |
| Counter | The maximum effective digits are 6, and the refresh time and effectivedigitsare adjustable. |
| Maximum Measurement Frequency | Maximum bandwidth of analog channel |
| Time Reference | Internal reference: ± 25 ppm |
| Interface | |
| USB-Host 2.0 | 1 on the front panel |
| USB-Device 2.0 | 1 on the rear panel |
| LAN | LAN (VXI11), 10/100 Base-T, RJ-45 |
| AUX Out | Trig Out, Pass/Fail, DVM |
| HDMI | 1 port for external display or projector |
| Probe Compensator Output | |
| Output Voltage | 3 Vpp |
| Frequency | 10 Hz ,100 Hz, 1 kHz (default), 10 kHz |
| Power Source | |
| Power Source | Power is greater than or equal to 12 V/3 A |
| Voltage | Supports Type-C or a portable charger with PD protocol |
| Power Consumption | 65 W Max |
| Fuse | 1.6 A |
| Environmental | |
| Temperature | Operating: 0℃ to +40℃ Non-operating: -20℃ to +60℃ |
| Cooling | Forced cooling by fan |
| Humidity | Operating: below +35 ℃, relative humidity ≤90％ Non-operating: +35 ℃ to +40 ℃, relative humidity ≤60％ |
| Altitude | Operating: below 3,000 meters; non-operating: below 15,000 meters |
| Pollution Degree | 2 |
| Operating Environment | Indoor |
| Mechanical Specifications | |
| Dimensions | 282 x 175 x 49 mm |
| Weight | 1.56 kg |
| Calibration Interval | |
| Calibration Interval | 1 year |
