Uni-Trend Technology MSO7204X offre

A nine-in-one powerhouse. The MSO7104X offers one instrument that can be a 1 GHz, 4 channels digital oscilloscope, logic analyzer, function/arbitrary waveform generator, spectrum analyzer, digital voltmeter, high-precision frequency counter, protocol analyzer, jitter/eye analyzer, and power analyzer.

Caractéristiques

• Experience the X-Factor for yourself. Let this multi-function instrument serve as the high-performance centerpiece for your test bench and it can be expanded as your needs change to integrate nine instruments in one, space-saving unit
• Out of the box, the Uni-T MSO7104X is a 1 GHz, 4 channels oscilloscope, a spectrum analyzer, a 4-digit voltmeter, a 7-digit frequency counter, and serial bus protocol analyzer (RS232/RS422/RS485/UART, I2C, SPI, CAN, and LIN included). Our new 12-bit Enhanced Resolution (ERES) gives amazing clarity of your signals
• With Uni-T's exclusive UltraAcq®, the waveform capture rate is up to 800,000 wfms/s, 2,000,000 wfms/s in sequence mode
• Spectrum analyzer function with up to 1 Mpts of enhanced FFT. Frequency Range: 0 Hz to 1.25 GHz. Waterfall curve, four traces and four detections. Marker point list. Auto, manual, and threshold mark types
• Digital voltmeter offers 4-digit precision. Measures DC/ACRMS/AC+DCRMS. Limit alarm lets you know when a threshold is crossed
• Built-in high-precision frequency counter: Includes a 8-digit hardware frequency counter. Adjustable frequency counter refresh time. Totalizer function
• The MSO7000X presents an all new Ultra Phosphor 3.0 display. This is a high-speed architecture that can help you find elusive troubled signals. See it all on a bright and crisp 15.6" (39.6 cm) FHD touch screen
• Operates up to 4 windows with independent time bases: Easily drag and arrange the windows however you need
• Packed with 48 kinds of measurements. Our Quick Measure gives you 35 measurements displayed at the same time. Measurement statistics display 9 parameters and can be shown as a histogram or a tendency chart. See your measurements like never before
• If you need to perform calculations on your waveforms, your MSO7000X has you covered. Basic math, along with digital filters (high, low, band pass, and band-limit) are standard. You can also define your own functions, including digital channel, analog channel, reference channel, and all channels. There's also embedded programming technology so matlab can directly render operating code
• Looking to capture and analyze digital signals, add the MSO7000X-LA software and pair your scope with the Uni-T UT-M15 logic probes for 16 channels of digital logic analysis at up to 1.25 GSa/s.Digital channel storage depth is up to 125 Mpts with a minimum detectable pulse width of 3.2 ns
• Unlock the built-in dual-channel, 60MHz arbitrary function generator with option MSO7000X-AWG. Maximum sample rate is 625 MSa/s with a 16bit vertical resolution. Built-in waveforms: Sine, Square, Pulse, Ramp, Noise, and DC. Includes over 200 arbitrary waveforms. Various modulation and sweep-types round out the package
• Looking for visual analysis of signal integrity? The MSO7000X-Jitter option will give you Jitter Analysis and Eye Diagram capabilities. As signal rates increase, data transmission becomes more sensitive to link losses, often caused by clock jitter due to system failures. The MSO7000X series oscilloscopes offer a solution with eye diagram and clock recovery functions, enabling designers to quickly identify and diagnose signal issues using standard or custom templates. Additionally, the MSO7000X provides comprehensive jitter analysis software, which includes TIE trend charts, histograms, and bathtub curves, allowing engineers to measure and visualize jitter parameters like TIE, RJ, and DJ across time, frequency, and statistical domains for precise fault location
• Extend your MSO7000X to be a Power Analyzer and add the ability to perform Power Quality, Harmonic Analysis, Ripple Wave Analysis, Loop Analysis, Switching loss, and Safety Operation Area with option MSO7000X-PWR
• Need more Bus triggering and decoding options? Add single Bus types, including CAN-FD, FlexRay, SENT, Audio, MIL-STD-1553B, ARINC429, and Manchester, either individually or save with Decode Bundles
• UNI-T's new Autoset function uses a fast fuzzy algorithm with multi-channel parallel processing, allowing the oscilloscope to quickly and accurately detect signal amplitudes and frequencies. This improvement opens all channels in under 1.5 seconds and a single channel in less than 1 second, enhancing efficiency and reducing mistakes
• Enhanced navigation and search. The MSO3000X series offers a 500 Mpts memory depth, allowing electrical engineers to capture and analyze tens of thousands of waveforms in a single capture, saving time on manual searches. With customizable search conditions and advanced analysis functions, this upgrade boosts efficiency and enables more focused design and troubleshooting
• Can be controlled by SCPI standard protocols, Python, and Labview
• Built-in web server for remote, cross-platform operation
• User-Friendly Interface: The Uni-T MSO7000X Mixed Signal Oscilloscope has a 15.6" (39 cm) multi-touch screen and traditional button-and-knob operation options provide a seamless and interactive experience, ensuring you can work efficiently. We have also adopted an open user interface, allowing you to set the interface how you want to.
• Connectivity options include: USB 3.0 Host x 3, USB 3.0 Device, LAN, AUX Out, Generator Out x 2, 10 MHz Reference Input, 10 MHz Reference Output, HDMI
• Certifications: cETLus, CE, ROHS, UKCA

Applications

• Signal integrity analysis
• Research and development
• Circuit debugging
• Automotive engineering
• 5 G/6 G Network