Garantissez des connexions électriques sécurisées et un suivi permanent des cycles sur la machinerie lourde. Ce dispositif d'enregistrement robuste et inviolable s'intègre facilement aux panneaux de commande haute tension, fournissant des mesures opérationnelles continues pour optimiser la surveillance des installations.
Garantissez des connexions électriques sécurisées et un suivi permanent des cycles sur la machinerie lourde. Ce dispositif d'enregistrement robuste et inviolable s'intègre facilement aux panneaux de commande haute tension, fournissant des mesures opérationnelles continues pour optimiser la surveillance des installations.
The B Series are the perfect all-round counter. A general-purpose, high-performance/low-cost counter for monitoring manufacturing processes, flow totals, and test cycles where an accurate count must be displayed even when power is lost. It utilizes an all-plastic housing and frame to achieve a lower cost without sacrificing quality. Count life is 200 million minimum, with optional speeds to 50 counts per second possible. Spring clip or two screw mountings are standard
Caractéristiques
| Count Life | 200 million |
| Numbers | 0.160" (4 mm) high |
| Housing | Black plastic, 6-digits |
| Mounting | Screw panel |
| Connections | 0.060" pins with push-on connectors or screw terminals |
| Count Speed with DC | 10 count/seconds |
| Impulse Ratio | 60% on time, 40% off time |
| Operating Voltage | 110 V DC |
| Operating Temp. | 23 to 104°F (-5 to 40°C) |
| Shock | Unit meets IEC 068-2-27 for Shock Stability |
| Vibration | Unit meets IEC 068-2-6 for Vibration |
| Approvals | CE approved |
| Maximum Count Time | Continuous 50/50 or 60/40, on/off |
| Option | Screw terminal |
| Reset | Non-reset |
| Count Life | 200 million |
| Numbers | 0.160" (4 mm) high |
| Housing | Black plastic, 6-digits |
| Mounting | Screw panel |
| Connections | 0.060" pins with push-on connectors or screw terminals |
| Count Speed with DC | 10 count/seconds |
| Impulse Ratio | 60% on time, 40% off time |
| Operating Voltage | 110 V DC |
| Operating Temp. | 23 to 104°F (-5 to 40°C) |
| Shock | Unit meets IEC 068-2-27 for Shock Stability |
| Vibration | Unit meets IEC 068-2-6 for Vibration |
| Approvals | CE approved |
| Maximum Count Time | Continuous 50/50 or 60/40, on/off |
| Option | Screw terminal |
| Reset | Non-reset |
