Accurately monitor machinery cycles with this rugged, unpowered tracking device. Built for demanding industrial environments, it provides reliable operational metrics to keep your production lines running efficiently without the need for external power sources.
Accurately monitor machinery cycles with this rugged, unpowered tracking device. Built for demanding industrial environments, it provides reliable operational metrics to keep your production lines running efficiently without the need for external power sources.
This unit counts revolutions on many different types of production machinery. Robustly constructed for continuous operation at high speeds with the main shaft running in double oil impregnated bearings to ensure accurate, long term, trouble free service. It is supplied with a double or single drive with wing bushing and customer configurable left or right side reset.
Caractéristiques
Applications
The 3602 Series counts revolutions on a wide range of production machinery for continuous manufacturing processes. Common industries include:
| Display | White on black, decimals black on white 0.25" (6.4 mm) figures 1 decimal place |
| Counter Type | Left-hand shaft |
| Figure Wheel Reading | 0 to 11° figure wheel (feet and inches) |
| Drive Direction | Top going |
| Base Material | Black PC-ABS plastic |
| Cover Material | Grey ABS plastic |
| Drive Shaft Diameter | 0.275" (7 mm) diameter |
| Gearing | 1:1 ratio |
| Bearing | Bronze, oil impregnated for life |
| Operating Torque | 180g.cm (2.5oz.in) at 1:1 gearing |
| Maximum Shaft Speed | 3000 RPM |
| Maximum Count Speed | 3000 CPM |
| Accuracy | ±1% |
| Environmental | Operating temperature: 14 to 122°F (-10 to 50°C) Storage temperature: -4 to 122°F (-20 to 50°C) Protection: IP40 |
| Weight | 7.05 oz (200 g) |
| Display | White on black, decimals black on white 0.25" (6.4 mm) figures 1 decimal place |
| Counter Type | Left-hand shaft |
| Figure Wheel Reading | 0 to 11° figure wheel (feet and inches) |
| Drive Direction | Top going |
| Base Material | Black PC-ABS plastic |
| Cover Material | Grey ABS plastic |
| Drive Shaft Diameter | 0.275" (7 mm) diameter |
| Gearing | 1:1 ratio |
| Bearing | Bronze, oil impregnated for life |
| Operating Torque | 180g.cm (2.5oz.in) at 1:1 gearing |
| Maximum Shaft Speed | 3000 RPM |
| Maximum Count Speed | 3000 CPM |
| Accuracy | ±1% |
| Environmental | Operating temperature: 14 to 122°F (-10 to 50°C) Storage temperature: -4 to 122°F (-20 to 50°C) Protection: IP40 |
| Weight | 7.05 oz (200 g) |
