Using an integral bearing set and flex mounting system, this encoder delivers stable and reliable operation. It's designed for servo motor control, robotics and more.
Using an integral bearing set and flex mounting system, this encoder delivers stable and reliable operation. It's designed for servo motor control, robotics and more.
The Trumeter 15H-01SA-0512N5QPP-F00-T1 Hollow-Bore Performance Encoder is ideal for use with robotics, high power motors and more. It uses an integral bearing set and flex mounting system to deliver stable and reliable operation, and is also tolerant to axial misalignment or radial shaft run-out. So anytime you need to run a high-performance operation, you can rely on this encoder to get the job done.
Features
| Bore | 0.25" (6.35 mm) hollow bore |
| Mounting | 1.812" (46 mm) 2-hole flex mount |
| Cycles per Revolution | 512 PPR |
| Commutation | None |
| Input Voltage | 5 VDC |
| Number of Channels | Quadrature A and B |
| Output Type | Push-pull |
| Connector Type | 18" (45.72 cm) cable (standard) |
| Operating Temperature | -40 to 185°F (-40 to 85°C) |
| Environment | Storage temperature: -13 to 185°F (-25 to 85°C); humidity: 98% RH non-condensing |
| Max Shaft Speed | 8,000 rpm |
| Accuracy | Within 0.017° mechanical or 1 arc minute from true position |
| Maximum Frequency | Standard: 200 kHz for CPR 1 to 2,540; 500 kHz for CPR 2,541 to 5,000; 1 MHz for CPR 5,001 to 10,000 |
| Sealing | IP50 (standard) |
| Certification | None (standard) |
| Product Width | 1.5" (38 mm) diameter |
| Product Height | 1" (25.4 mm) |
| Product Weight | 3 oz (0.19 g) |
| Bore | 0.25" (6.35 mm) hollow bore |
| Mounting | 1.812" (46 mm) 2-hole flex mount |
| Cycles per Revolution | 512 PPR |
| Commutation | None |
| Input Voltage | 5 VDC |
| Number of Channels | Quadrature A and B |
| Output Type | Push-pull |
| Connector Type | 18" (45.72 cm) cable (standard) |
| Operating Temperature | -40 to 185°F (-40 to 85°C) |
| Environment | Storage temperature: -13 to 185°F (-25 to 85°C); humidity: 98% RH non-condensing |
| Max Shaft Speed | 8,000 rpm |
| Accuracy | Within 0.017° mechanical or 1 arc minute from true position |
| Maximum Frequency | Standard: 200 kHz for CPR 1 to 2,540; 500 kHz for CPR 2,541 to 5,000; 1 MHz for CPR 5,001 to 10,000 |
| Sealing | IP50 (standard) |
| Certification | None (standard) |
| Product Width | 1.5" (38 mm) diameter |
| Product Height | 1" (25.4 mm) |
| Product Weight | 3 oz (0.19 g) |
