Teledyne LeCroy 780D HDMI Protocol Analyzer/Generator, 600 MHz

Modèle: 780D

Teledyne LeCroy 780D HDMI Protocol Analyzer/Generator, 600 MHz

Modèle: 780D

Portable, handheld digital video generator and analyzer that enables you to run tests on digital video devices and networkdistribution devices on site or in the R&D lab.

Portable, handheld digital video generator and analyzer that enables you to run tests on digital video devices and networkdistribution devices on site or in the R&D lab.

Discontinué!

Ce produit a été discontinué et n’est plus disponible. Il n’y a pas de produit de remplacement direct. Ne vous inquiétez pas, nous avons quelques options pour vous aider à trouver ce dont vous avez besoin:

Visitez notre catégorie Laboratoire d'électroniques pour trouver des produits similaires.

Ou nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin:


Teledyne LeCroy 780D Offers

The HDMI ports support testing up to 600 MHz pixel rate and the HDBaseT ports support testing up to 300 MHz pixel rate. Testing these digital interfaces is supported by both an output port and an input port to allow testing of digital video sources, displays, audio devices and distribution devices. It also offers a VGA output for testing RGB and component analog.

Features

  • Ease of Use
  • Report File Creation feature provides HTML formatted report of tests performed
  • Diagnose and Troubleshoot
  • View Incoming Video & Data
  • Test Response to EDIDs
  • View Auxiliary Channel Transactions
  • Verify Cable / Network (Loop)
  • Verify Video at Far End
  • Verify EDID Contents
  • Verify Audio
  • Verify HDCP Authentication

Ease of Use

Large color touch screen provides ease of use and quick status information. The rich set of routine tests and diagnostic tests are accessible with just a few touch clicks. You can quickly configure settings on the outputs. A rich command set, available either through USB or RS-232 serial ports, supports automated testing.

Diagnose and Troubleshoot

Provides an at-a-glance status bar on the bottom of the 7" in touch screen. The status bar provides basic information about what the instrument is transmitting to a display and what it is receiving from a source. The instruments can run quick video audio and protocol tests on individual sources, displays, repeaters, distribution gear as well as cables. Protocol tests include tests for EDID, HDCP authentication, info frames and timing data. You can place the unit at any point in a video distribution network and run tests upstream toward the source while emulating a display (or sink). Or you can run tests downstream while emulating a source. Generate reports to demonstrate test series completion.

Teledyne LeCroy 780D Specifications

AC Adapter 100-120 VAC, 47-63Hz; 0.4 amps max
Embedded Display 480 x 272 Resolution
24 bit RGB Color
Command Line Control USB Type B
Environmental Operating Temperature: 32 to 104°F (0 to 40°C)
File Access USB Type B (command line / file transfer; SD Card (upgrades / file transfer)
HDMI Version HDMI 1.4b
Connector Type A Tx
Type A Rx
Video Max Pixel Rate 225 MHz (2.25 Gbps/channel TMDS rate)
Battery 6 x AA NiMh Batteries
2 hours between charge. Overnight charge required
Dimensions 2.7 x 9.75 x 6" (6.98 x 24.76 x 15.24 cm)
Weight 3.25 lbs (1.47 kg)
Cliquer ici pour toutes les spécifications du Teledyne LeCroy 780D

What's included with the Teledyne LeCroy 780D

  • HDMI Protocol Analyzer/Generator
  • Power Line Cord
  • 12V DC (40 W) Power Supply
  • 12V DC (40 W) Adaptor
  • 12V DC (40 W) Charger
  • HDMI to HDMI Cable
  • VGA to VGA Cable
  • VGA to HDTV Adapter
  • RCA SPDIF Cable
  • Optical TOS Cable
  • USB Cable

Poser une question sur le Teledyne LeCroy 780D HDMI Protocol Analyzer/Generator, 600 MHz

Teledyne LeCroy 780D Offers

The HDMI ports support testing up to 600 MHz pixel rate and the HDBaseT ports support testing up to 300 MHz pixel rate. Testing these digital interfaces is supported by both an output port and an input port to allow testing of digital video sources, displays, audio devices and distribution devices. It also offers a VGA output for testing RGB and component analog.

Features

  • Ease of Use
  • Report File Creation feature provides HTML formatted report of tests performed
  • Diagnose and Troubleshoot
  • View Incoming Video & Data
  • Test Response to EDIDs
  • View Auxiliary Channel Transactions
  • Verify Cable / Network (Loop)
  • Verify Video at Far End
  • Verify EDID Contents
  • Verify Audio
  • Verify HDCP Authentication

Ease of Use

Large color touch screen provides ease of use and quick status information. The rich set of routine tests and diagnostic tests are accessible with just a few touch clicks. You can quickly configure settings on the outputs. A rich command set, available either through USB or RS-232 serial ports, supports automated testing.

Diagnose and Troubleshoot

Provides an at-a-glance status bar on the bottom of the 7" in touch screen. The status bar provides basic information about what the instrument is transmitting to a display and what it is receiving from a source. The instruments can run quick video audio and protocol tests on individual sources, displays, repeaters, distribution gear as well as cables. Protocol tests include tests for EDID, HDCP authentication, info frames and timing data. You can place the unit at any point in a video distribution network and run tests upstream toward the source while emulating a display (or sink). Or you can run tests downstream while emulating a source. Generate reports to demonstrate test series completion.

Teledyne LeCroy 780D Specifications

AC Adapter 100-120 VAC, 47-63Hz; 0.4 amps max
Embedded Display 480 x 272 Resolution
24 bit RGB Color
Command Line Control USB Type B
Environmental Operating Temperature: 32 to 104°F (0 to 40°C)
File Access USB Type B (command line / file transfer; SD Card (upgrades / file transfer)
HDMI Version HDMI 1.4b
Connector Type A Tx
Type A Rx
Video Max Pixel Rate 225 MHz (2.25 Gbps/channel TMDS rate)
Battery 6 x AA NiMh Batteries
2 hours between charge. Overnight charge required
Dimensions 2.7 x 9.75 x 6" (6.98 x 24.76 x 15.24 cm)
Weight 3.25 lbs (1.47 kg)
Cliquer ici pour toutes les spécifications du Teledyne LeCroy 780D

What's included with the Teledyne LeCroy 780D

  • HDMI Protocol Analyzer/Generator
  • Power Line Cord
  • 12V DC (40 W) Power Supply
  • 12V DC (40 W) Adaptor
  • 12V DC (40 W) Charger
  • HDMI to HDMI Cable
  • VGA to VGA Cable
  • VGA to HDTV Adapter
  • RCA SPDIF Cable
  • Optical TOS Cable
  • USB Cable

Poser une question sur le Teledyne LeCroy 780D HDMI Protocol Analyzer/Generator, 600 MHz

Plus de produits Teledyne LeCroy