Teledyne LeCroy 780D Offers

The HDMI ports support testing up to 600 MHz pixel rate and the HDBaseT ports support testing up to 300 MHz pixel rate. Testing these digital interfaces is supported by both an output port and an input port to allow testing of digital video sources, displays, audio devices and distribution devices. It also offers a VGA output for testing RGB and component analog.

Features

• Ease of Use
• Report File Creation feature provides HTML formatted report of tests performed
• Diagnose and Troubleshoot
• View Incoming Video & Data
• Test Response to EDIDs
• View Auxiliary Channel Transactions
• Verify Cable / Network (Loop)
• Verify Video at Far End
• Verify EDID Contents
• Verify Audio
• Verify HDCP Authentication

Ease of Use

Large color touch screen provides ease of use and quick status information. The rich set of routine tests and diagnostic tests are accessible with just a few touch clicks. You can quickly configure settings on the outputs. A rich command set, available either through USB or RS-232 serial ports, supports automated testing.

Diagnose and Troubleshoot

Provides an at-a-glance status bar on the bottom of the 7" in touch screen. The status bar provides basic information about what the instrument is transmitting to a display and what it is receiving from a source. The instruments can run quick video audio and protocol tests on individual sources, displays, repeaters, distribution gear as well as cables. Protocol tests include tests for EDID, HDCP authentication, info frames and timing data. You can place the unit at any point in a video distribution network and run tests upstream toward the source while emulating a display (or sink). Or you can run tests downstream while emulating a source. Generate reports to demonstrate test series completion.