Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

3993 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

3993 COMMENTAIRES

Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester

Modèle: 6010A | No. de commande: KEW6010A

Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester-

Télécharger: datasheet manual

Plus de produits Kyoritsu

Demander à un expert

Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester

Modèle: 6010A | No. de commande: KEW6010A

This advanced multifunction tester can perform all the testing required by IEC 364-6-61with one single instrument.

This advanced multifunction tester can perform all the testing required by IEC 364-6-61with one single instrument.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :

Kyoritsu 6010B 6-in-1 Continuity / Insulation / Loop / RCD / Contact Voltage / Mains Voltage Testers-

Kyoritsu 6010B 6-in-1 Continuity / Insulation / Loop / RCD / Contact Voltage / Mains Voltage Testers

Modèle: 6010B | No. de commande: KEW6010B

With the capability of downloading results to a PC and data logging information.

En savoir plus

Kyoritsu 6010A Offers

Features

Continuity and Insulation Testing

  • Live circuit warning LED: Immediately notification if the circuit under test is live
  • Auto Discharge: Allows fast and safe discharge of electrical energy stored in capacitive circuits following testing
  • Integral overload protection on internal continuity and insulation test circuitry
  • Autoranging
  • 500V DC test voltage for insulation tests
  • 200 mA short circuit current on continuity ranges

Loop and RCD Testing

  • Wiring connection check LED's: Immediate indication if wiring of circuit under test is correct
  • Overheat Protection: Rapid detection of overheating of internal circuitry, display of warning signal to user and automatic halting of measurement
  • Supply Voltage Indication: Can display supply voltage value in loop impedance mode
  • Low Current Loop Impedance Test: Short duration low test current will prevent tripping of many passive RCDs
  • Auto Data Hold: Retains displayed reading for set period following test
  • Phase Angle Selection: Selection of test current from +ve or -ve half cycle of waveform can prevent tripping of polarized type RCDs

Kyoritsu 6010A Specifications

Continuity Testing
Measuring Ranges 20/200 Ω Autoranging
Open Circuit Voltage 4 V
Short Circuit Current 200 mA DC
Accuracy ±(3%rdg+3dgt)
Insulation Testing
Measuring Ranges 20/200 Ω Autoranging
Test Voltage 500V DC
Output Voltage on Open Circuit 570 V DC ±6%
Rated Current 1 mA
Accuracy ±(3%rdg+3dgt)
Loop Impedance Testing
Rated Voltage 230V AC ±10% @ 50 Hz
Voltage Measuring Range 100 to 250 V @ 50 Hz
Impedance Ranges 20/2000 Ω
Nominal Test Current 20 Ω Range: 24 A
2000 Ω Range: 15 mA
Accuracy 20 Ω Range: ±(3%rdg+8dgt)
2000 Ω Range: ±(3%rdg+8dgt)
RCD Testing
Rated Voltage 230V AC ±10% @ 50 Hz
Trip Current Settings RCD x 1/2: 5, 15, 50, 150, 250 mA
RCD x 1: 10, 30,100,300,500 mA
RCD Fast: 150 mA
Trip Current Duration RCD x 1/2 x 1: 2000 ms
RCD fast: 40 ms
Trip Current ±3% of test current at 230 V
Trip time ±(3%rdg+3dgt)
General Specifications
Safety Standard IEC 61010-1 CAT.Ⅲ 300V Pollution degree 2
Withstand Voltage 3700V AC for one minute
Cliquer ici pour toutes les spécifications du Kyoritsu 6010A

What's included with the Kyoritsu 6010A

  • Multifunction Tester
  • Test Leads
  • Test Lead with IEC Connector
  • Pouch for Test leads
  • Shoulder Strap
  • Shoulder Pad
  • 8 x AA Batteries
datasheet pour le Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester manual pour le Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester

Poser une question sur le Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester

Kyoritsu 6010A Offers

Features

Continuity and Insulation Testing

  • Live circuit warning LED: Immediately notification if the circuit under test is live
  • Auto Discharge: Allows fast and safe discharge of electrical energy stored in capacitive circuits following testing
  • Integral overload protection on internal continuity and insulation test circuitry
  • Autoranging
  • 500V DC test voltage for insulation tests
  • 200 mA short circuit current on continuity ranges

Loop and RCD Testing

  • Wiring connection check LED's: Immediate indication if wiring of circuit under test is correct
  • Overheat Protection: Rapid detection of overheating of internal circuitry, display of warning signal to user and automatic halting of measurement
  • Supply Voltage Indication: Can display supply voltage value in loop impedance mode
  • Low Current Loop Impedance Test: Short duration low test current will prevent tripping of many passive RCDs
  • Auto Data Hold: Retains displayed reading for set period following test
  • Phase Angle Selection: Selection of test current from +ve or -ve half cycle of waveform can prevent tripping of polarized type RCDs
En savoir plus...

Kyoritsu 6010A Specifications

Continuity Testing
Measuring Ranges 20/200 Ω Autoranging
Open Circuit Voltage 4 V
Short Circuit Current 200 mA DC
Accuracy ±(3%rdg+3dgt)
Insulation Testing
Measuring Ranges 20/200 Ω Autoranging
Test Voltage 500V DC
Output Voltage on Open Circuit 570 V DC ±6%
Rated Current 1 mA
Accuracy ±(3%rdg+3dgt)
Loop Impedance Testing
Rated Voltage 230V AC ±10% @ 50 Hz
Voltage Measuring Range 100 to 250 V @ 50 Hz
Impedance Ranges 20/2000 Ω
Nominal Test Current 20 Ω Range: 24 A
2000 Ω Range: 15 mA
Accuracy 20 Ω Range: ±(3%rdg+8dgt)
2000 Ω Range: ±(3%rdg+8dgt)
RCD Testing
Rated Voltage 230V AC ±10% @ 50 Hz
Trip Current Settings RCD x 1/2: 5, 15, 50, 150, 250 mA
RCD x 1: 10, 30,100,300,500 mA
RCD Fast: 150 mA
Trip Current Duration RCD x 1/2 x 1: 2000 ms
RCD fast: 40 ms
Trip Current ±3% of test current at 230 V
Trip time ±(3%rdg+3dgt)
General Specifications
Safety Standard IEC 61010-1 CAT.Ⅲ 300V Pollution degree 2
Withstand Voltage 3700V AC for one minute
Cliquer ici pour toutes les spécifications du Kyoritsu 6010A

What's included with the Kyoritsu 6010A

  • Multifunction Tester
  • Test Leads
  • Test Lead with IEC Connector
  • Pouch for Test leads
  • Shoulder Strap
  • Shoulder Pad
  • 8 x AA Batteries
datasheet pour le Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester manual pour le Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester

Poser une question sur le Kyoritsu 6010A 4-in-1 Continuity / Insulation / Loop / RCD Tester

Plus de produits Kyoritsu



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.