L'ensemble OTDR multimode OFP-100-MI/INTL Pro est axé sur la réduction des coûts tout en augmentant la productivité et en améliorant la fiabilité du réseau. Il s'agit de la version non sans fil, disponible pour les pays où l'adaptateur WiFi n'est pas certifié ou pour les clients qui ne souhaitent pas recevoir l'adaptateur WiFi.
L'ensemble OTDR multimode OFP-100-MI/INTL Pro est axé sur la réduction des coûts tout en augmentant la productivité et en améliorant la fiabilité du réseau. Il s'agit de la version non sans fil, disponible pour les pays où l'adaptateur WiFi n'est pas certifié ou pour les clients qui ne souhaitent pas recevoir l'adaptateur WiFi.
Applications
| Wavelengths | 850 nm +/- 10 nm 1300 nm +35/-15 nm |
| Compatible Fiber Types | 50/125 µm 62.5/125 µm |
| Event Dead Zone | 850 nm: 0.5 m typical 1300 nm: 0.7 m typical |
| Attenuation Dead Zone | 850 nm: 2.5 m typical 1300 nm: 4.5 m typical |
| Dynamic Range | 850 nm: 28 dB typical 1300 nm: 30 dB typical |
| Max Distance Range Setting | 40 km |
| Distance Measurement Range | 850 nm: 9 km 1300 nm: 35 km |
| Reflectance Range | 850 nm: -14 dB to -57 dB (typical) 1300 nm: -14 dB to -62 dB (typical) |
| Sample Resolution | 3 cm to 400 cm |
| Pulse Widths (Nominal) | 850 nm: 3, 5, 20, 40, 200 ns 1300 nm: 3, 5, 20, 40, 200, 1000 ns |
| Test Time (Per Wavelength) | Auto Setting: 5 sec (Typical) Quick Test Setting: 2 sec (Typical) Best Resolution Setting: 2 to 180 sec FaultMap Setting: 2 sec (Typical), 180 sec (Max) DataCenter OTDR Setting: 1 sec (Typical at 850 nm), 7 sec (Max) Manual Setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
| FiberInspector Probe | |
| Magnification | ~200X with OptiFiber Pro Display |
| Light Source | Blue LED |
| Power Source | Versiv Mainframe |
| Field of View (FOV) | Horizontal: 425 µm Vertical: 320 µm |
| Minimum Detectable Particle Size | 0.5 µm |
| Dimensions | Approximately 6.75" x 1.5" (1175 mm x 35 mm) Without Adapter Tip |
| Weight | 200 g |
| Temperature Range | Operating: 32 to 122°F (0 to +50°C) Storage: -4 to +158°F (-20 to +70°C) |
| Certifications | CE (when used with the mainframe) |
| VFL | |
| On/Off Control | Mechanical switch and a button on the touch screen |
| Output Power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating Wavelength | 650 nm Nominal |
| Spectral Width (RMS) | ±3 nm |
| Output Modes | Continuous Wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector Adapter | 2.5 mm Universal |
| Laser Safety (Classification) | Class II CDRH Complies to EN 60825-2 |
| Environmental specifications | |
| Operating temperature* | -10 to 45°C |
| Storage Temperature | -10 to +60°C |
| Operating Altitude | 4,000 m (13,123 ft) 3,200 m (10,500 ft) with AC Adapter |
| Storage Altitude | 12,000 m |
| EMC | EN 61326-1 |
| General Specifications | |
| Weight | Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg) |
| Dimensions | Mainframe with module and battery: 2.625 x 5.25 x 11.0" ( 6.67 x 13.33 x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery Life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Charge Time | Tester Off: Four hours to charge from 10% to 90% capacity Tester On: Six hours to charge from 10% to 90% capacity |
| Wavelengths | 850 nm +/- 10 nm 1300 nm +35/-15 nm |
| Compatible Fiber Types | 50/125 µm 62.5/125 µm |
| Event Dead Zone | 850 nm: 0.5 m typical 1300 nm: 0.7 m typical |
| Attenuation Dead Zone | 850 nm: 2.5 m typical 1300 nm: 4.5 m typical |
| Dynamic Range | 850 nm: 28 dB typical 1300 nm: 30 dB typical |
| Max Distance Range Setting | 40 km |
| Distance Measurement Range | 850 nm: 9 km 1300 nm: 35 km |
| Reflectance Range | 850 nm: -14 dB to -57 dB (typical) 1300 nm: -14 dB to -62 dB (typical) |
| Sample Resolution | 3 cm to 400 cm |
| Pulse Widths (Nominal) | 850 nm: 3, 5, 20, 40, 200 ns 1300 nm: 3, 5, 20, 40, 200, 1000 ns |
| Test Time (Per Wavelength) | Auto Setting: 5 sec (Typical) Quick Test Setting: 2 sec (Typical) Best Resolution Setting: 2 to 180 sec FaultMap Setting: 2 sec (Typical), 180 sec (Max) DataCenter OTDR Setting: 1 sec (Typical at 850 nm), 7 sec (Max) Manual Setting: 3, 5, 10, 20, 40, 60, 90, 120, 180 sec |
| FiberInspector Probe | |
| Magnification | ~200X with OptiFiber Pro Display |
| Light Source | Blue LED |
| Power Source | Versiv Mainframe |
| Field of View (FOV) | Horizontal: 425 µm Vertical: 320 µm |
| Minimum Detectable Particle Size | 0.5 µm |
| Dimensions | Approximately 6.75" x 1.5" (1175 mm x 35 mm) Without Adapter Tip |
| Weight | 200 g |
| Temperature Range | Operating: 32 to 122°F (0 to +50°C) Storage: -4 to +158°F (-20 to +70°C) |
| Certifications | CE (when used with the mainframe) |
| VFL | |
| On/Off Control | Mechanical switch and a button on the touch screen |
| Output Power | 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm) |
| Operating Wavelength | 650 nm Nominal |
| Spectral Width (RMS) | ±3 nm |
| Output Modes | Continuous Wave Pulsed mode (2 Hz to 3 Hz blink frequency) |
| Connector Adapter | 2.5 mm Universal |
| Laser Safety (Classification) | Class II CDRH Complies to EN 60825-2 |
| Environmental specifications | |
| Operating temperature* | -10 to 45°C |
| Storage Temperature | -10 to +60°C |
| Operating Altitude | 4,000 m (13,123 ft) 3,200 m (10,500 ft) with AC Adapter |
| Storage Altitude | 12,000 m |
| EMC | EN 61326-1 |
| General Specifications | |
| Weight | Mainframe with module and battery: 3 lbs, 5 oz (1.28 kg) |
| Dimensions | Mainframe with module and battery: 2.625 x 5.25 x 11.0" ( 6.67 x 13.33 x 27.94 cm) |
| Battery | Lithium ion battery pack, 7.2 volts |
| Battery Life | Eight hour Auto OTDR operation, dual wavelength, no video probe connected, 150 m of fiber |
| Charge Time | Tester Off: Four hours to charge from 10% to 90% capacity Tester On: Six hours to charge from 10% to 90% capacity |
