Verify fiber activity, polarity, and connectivity with this fiber detector that detects the presence of near-infrared light with a range of 850 to 1625 nm. Pocket-sized and non-contact, this detector tests single-mode, multimode, UPC, and APC patch cords and ports.
Verify fiber activity, polarity, and connectivity with this fiber detector that detects the presence of near-infrared light with a range of 850 to 1625 nm. Pocket-sized and non-contact, this detector tests single-mode, multimode, UPC, and APC patch cords and ports.
Applications
| Operating Principle | Senses near infrared light emitted from fiber optic cabling A continuous red glow at the handle and an audible beeping noise (if not switched off) indicates the presence of near infrared light |
| Optical Interface | Non-contact ceramic ferrule. Fits directly with 1.25 mm LC receptacles Tethered ferrule adapter for testing 1.25 mm ferrule patch cord Supports single-mode, multimode, UPC and APC connectors and ports |
| Wavelength Detection | 850 to 1625 nm |
| Optical Power Detection Range | +3 to -30 dBm |
| Light Detection | Visible steady red LED indicator when optical power is detected |
| Lightbeat Indicator | Flashes twice every two seconds when unit is on and battery strength is sufficient |
| Temperature Range | Operating: 50 to 122°F (10 to 50°C) Storage: -4 to 122°F (-20 to 50°C) |
| Operating Humidity Range | 95%: 50 to 95°F (10 to 35°C) Non-condensing 75%: 95 to 104°F (35 to 40°C) Non-condensing uncontrolled: <50°F (10°C) |
| Operating Altitude | ≤9842.52' (3000 m) |
| Battery | Saver: Unit automatically turns off after five minutes of inactivity Type: 2 x AAA alkaline batteries (included) Life: Typically, greater than 1 year (5 hours of use a week) |
| Dimensions | 2.87 x 1.42 x 10.27" (7.4 x 3.6 x 26.1 cm) |
| Weight | 2.1 oz (59 g) |
| Operating Principle | Senses near infrared light emitted from fiber optic cabling A continuous red glow at the handle and an audible beeping noise (if not switched off) indicates the presence of near infrared light |
| Optical Interface | Non-contact ceramic ferrule. Fits directly with 1.25 mm LC receptacles Tethered ferrule adapter for testing 1.25 mm ferrule patch cord Supports single-mode, multimode, UPC and APC connectors and ports |
| Wavelength Detection | 850 to 1625 nm |
| Optical Power Detection Range | +3 to -30 dBm |
| Light Detection | Visible steady red LED indicator when optical power is detected |
| Lightbeat Indicator | Flashes twice every two seconds when unit is on and battery strength is sufficient |
| Temperature Range | Operating: 50 to 122°F (10 to 50°C) Storage: -4 to 122°F (-20 to 50°C) |
| Operating Humidity Range | 95%: 50 to 95°F (10 to 35°C) Non-condensing 75%: 95 to 104°F (35 to 40°C) Non-condensing uncontrolled: <50°F (10°C) |
| Operating Altitude | ≤9842.52' (3000 m) |
| Battery | Saver: Unit automatically turns off after five minutes of inactivity Type: 2 x AAA alkaline batteries (included) Life: Typically, greater than 1 year (5 hours of use a week) |
| Dimensions | 2.87 x 1.42 x 10.27" (7.4 x 3.6 x 26.1 cm) |
| Weight | 2.1 oz (59 g) |
