Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

4115 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

4115 COMMENTAIRES

Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi

Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi-

Télécharger: datasheet manual

Plus de produits M&G

Demander à un expert

Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi

Idéal pour tester et étalonner les manomètres, les soupapes de sûreté et les pressostats, ce testeur de comparateur hydraulique de type T génère jusqu'à 15,000 psi (1000 bar) et est très volumineux. De plus, cet ensemble de test comprend une pompe hydraulique manuelle, un collecteur de test et 4 manomètres de 11.4 cm (4.5"), dont l'étendue en PSIG varie selon le modèle.

Idéal pour tester et étalonner les manomètres, les soupapes de sûreté et les pressostats, ce testeur de comparateur hydraulique de type T génère jusqu'à 15,000 psi (1000 bar) et est très volumineux. De plus, cet ensemble de test comprend une pompe hydraulique manuelle, un collecteur de test et 4 manomètres de 11.4 cm (4.5"), dont l'étendue en PSIG varie selon le modèle.

Ce produit excède les dimensions/poids de livraison standard, donc il ne se qualifie pas pour la livraison gratuite. Nous vous contacterons avec vos frais de livraisons.

Configurer ce produit:

Range Option
Calibration Options
Pressure Medium Option
O-ring Option
Pour voir votre prix et disponibilité, choisissez vos options et ajoutez cet item à votre panier.
Numéro de commande
Idéal pour tester et étalonner les manomètres, les soupapes de sûreté et les pressostats, ce testeur de comparateur hydraulique de type T génère jusqu'à 15,000 psi (1000 bar) et est très volumineux. De plus, cet ensemble de test comprend une pompe hydraulique manuelle, un collecteur de test et 4 manomètres de 11.4 cm (4.5"), dont l'étendue en PSIG varie selon le modèle.
Votre prix $
Disponibilité
Quantité

Accessoires recommandées

AMETEK Jofra 99-90019 Oil Dispenser-

AMETEK Jofra 99-90019 Oil Dispenser

99-90019

AMETEK Jofra T-559 326 Pump Rebuild Kit, type T VITON-

AMETEK Jofra T-559 326 Pump Rebuild Kit, type T VITON

T-559

AMETEK Jofra T-250 326 Pump Rebuild Kit, type T Buna N-

AMETEK Jofra T-250 326 Pump Rebuild Kit, type T Buna N

T-250

AMETEK Crystal 4714 MP Female to 0.25 NPT Male CPF Fitting-

AMETEK Crystal 4714 MP Female to 0.25 NPT Male CPF Fitting

4714

AMETEK Crystal 4015 BSP Test Kit-

AMETEK Crystal 4015 BSP Test Kit

4015

AMETEK Crystal 4013 Quick Test NPT Kit-

AMETEK Crystal 4013 Quick Test NPT Kit

4013

M&G T Hydraulic Comparator Series offre

Les comparateurs de pression servent de normes de pression secondaire, permettant des tests rapides et précis en comparant des instruments sur un collecteur de test sous pression avec des jauges d'essai de précision connue. Les comparateurs de type T comportent des pompes à main avec une soupape de commande manuelle à double volume pour une accumulation de pression rapide et un réglage fin. Le collecteur de test comprend un vernier pour le contrôle de la pression de la pompe.

Caractéristiques

  • Gamme de pression: 0 à 15,000 psi
  • Paramètres à volume élevé et faible
  • Deux ports de sortie
  • Grande capacité fluide
  • Ajustement fin jusqu'à 3500 psi
  • Compatible avec l'eau et l'huile
  • T-1-CPF comprend des raccords CPF
  • Conception éprouvée, robuste et portable
  • Tous les composants dans un cas
  • Gammes impériales ou métriques
  • Facile à configurer et à utiliser
  • Précision à ± 0.25% F.S.

Applications

  • Test et calibrer les manomètres, les vannes de décharge et les interrupteurs de pression
  • Pétrole et gaz
  • Médicaments
  • Production d'électricité
  • Laboratoires de recherche

Spécifications pour le M&G T Hydraulic Comparator Series

Taper Hydraulique
Plage de pression Pompe: 15,000 psi/1000 bar
Gauge: jusqu'à 10,000 psi (700 bar)
Remarque: Dépendant du modèle
Précision ± 0.025% de la jauge
10,000 psi/700 bar ± 0.50% de la jauge
Jauges 4 fourni (modèle à charge)
Source de pression Action de levier, pompe hydraulique à double volume à main
Moyen Mélange à eau/alcool distillé (standard)
Huile AAA (facultative vendue séparément) Spécifiez lors de la commande
Capacité du réservoir 75" 3 (1.23 L)
Déplacement Plage haute: 0.17 à 0.20"3 (2.8 à 3.2 cm2) par course
Plage faible: 0.018 à 0.024"3 (0.30 à 0.40 cm2) par AVC
Pièces mouillées Acier inoxydable, monel, laiton, ni-span C (jauges à température compensée uniquement), acier en carbone, buna n
Joints joints Buna N (Standard), EPT (Facultatif), Viton (facultatif) (spécifiez lors de la commande)
Connexions de test Type d'union: 0.64 cm (¼") NPT, 1.27 cm (½") NPT, 7⁄16 UNF - 0.64 cm (¼") BSP et 1.27 cm (½") BSP (avec des modèles métriques)
Jauges Analogique, lecture du visage de cadran
Unités d'ingénierie psi, kg/cm ² , bar, kpa
Cas 1
Configuration Ensemble de comparateur avec pompe et jauges, et boîtier de transport
Dimensions 40.6 x 52.4 x 27.9 cm (16 x 20.6 x 11")
Pompe: 79.4 x 22.9 x 50.8 cm (31.3 x 9 x 20")
Poids 24.95 kg (55 lbs)
Pompe: 9.1 kg (20 lbs)

Le M&G T Hydraulic Comparator Series comprend

  • Comparateur de type T
  • Certification traçable nist y compris les données
  • 4 x jauges d'essai
  • Pompe
  • Outils
  • Casse de soins
Brochure Complete Pressure Systems Brochure CPF Fittings brochure Ametek M&G Type T Series Hydraulic Comparator Tester Brochure datasheet pour le Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi manual pour le Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi.

Ametek M&G T-824 U-cup, nitrile T-824
Nitrile U-cup seal for the Type T Series.



Ametek M&G T-630 Valve Assembly, needle T-630
Valve assembly, needle mechanical parts for the Type T Series.



Ametek M&G T-628 Cap T-628
Cap mechanical parts for the Type T Series.



Ametek M&G T-595 Liner for the Type T Series body plate T-595
This liner is designed for the Type T Series body plate.



Ametek M&G T-633 Vernier Assembly T-633
Vernier assembly mechanical parts for the Type T Series.



Ametek M&G T-647 Nut T-647
Nut mechanical parts for the Type T Series.



Ametek M&G T-773 Handle T-773
Handle for the relief valve in the Type T Series.



Ametek M&G T-753 Filter T-753
Filter component for the Type T Series.



Ametek M&G T-664 Swivel Fitting Assembly T-664
Swivel fitting assembly for the Type T Series.



Ametek M&G T-657 Poppet T-657
Poppet valve part for the Type T Series.



Ametek M&G T-654 Spring, piston T-654
Mechanical spring component for the Type T Series.



Ametek M&G SPK-T900-001 Vernier and Vent Valve Assembly SPK-T900-001
Vernier and vent valve assembly for the Type T Series.



Ametek M&G SPK-T-001 Complete Handle and Piston Assembly SPK-T-001
Complete handle and piston assembly for the Type T Series.



Ametek M&G T-102 Handle Knob for the Type T series T-102
This handle knob is a mechanical part designed to use with the Type T Series.



Ametek M&G T-571 Carrier for HydraLite T-571
This carrier is designed for use with HydraLite. Compatible with the Type T Series.



Ametek M&G T-570 Retainer for HydraLite T-570
This retainer is designed for use with HydraLite. Compatible with the Type T Series.



Ametek M&G T-539 Protective container T-539
This protective container provides secure storage. Compatible with the Type T Series.



Ametek M&G T-534 Drawbar, 8 ⅛" T-534
This drawbar measures 8 ⅛" (20.6 cm). Compatible with the Type T Series.



Ametek M&G T-533 Drawbar, 6 ⅝" T-533
This drawbar measures 6 ⅝" (16.8 cm). Compatible with the Type T Series.



Ametek M&G T-532 Drawbar, 5 5⁄16" T-532
This drawbar measures 5 5⁄16" (13.5 cm). Compatible with the Type T Series.



Ametek M&G T-529 Washer for the Type T Series T-529
This washer is used for the weight stack drawbar. Compatible with the Type T Series.



Ametek M&G T-526 Tag for the Type T Series T-526
This tag is used for weight designation. Compatible with the Type T Series.



Ametek M&G T-103 Plug for the Type T Series, 9/16-18 UNF male T-103
This plug has a 9/16-18 UNF male connection. Compatible with the Type T Series.



Ametek M&G T-629 Fitting T-629
Fitting mechanical parts for the Type T Series.



Ametek M&G T-636 Fitting, swivel T-636
Swivel fitting mechanical parts for the Type T Series.



Ametek M&G T-823 Fitting T-823
Street tee fitting for the Type T Series.



Ametek M&G T-620 Hydraulic Handpump, 0 to 3000 psi (207 bar) T-620
Type T Hand pump with pistol-grip operation and AAA oil. Measures 0 to 3,000 psi (207 bar) for the Type T Series.



Ametek M&G T-811-M Pneumatic Handpump 2 to 25 "Hg, metric T-811-M
Pneumatic handpump measuring up to 2 to 25 inHg vacuum range with metric units. Compatible with the Type T Series.



Ametek M&G T-811 Pneumatic Handpump, 1 to 25 "Hg T-811
Pneumatic handpump for the Type T Series with 1 to 25 inHg vacuum range.



Ametek M&G T-810-M Pneumatic Handpump, 0 to 200 psi (14 bar), metric T-810-M
Pneumatic handpump measuring up to 0 to 200 psi (14 bar) pressure range with metric units for the Type T Series.



Ametek M&G T-810 Pneumatic Handpump, 0 to 200 psi (14 bar), imperial T-810
Pneumatic handpump measuring up to 0 to 200 psi (14 bar) pressure range with imperial units for the Type T Series.



Ametek M&G T-1/OIL Hydraulic Pump with o-rings, oil and tools, 0 to 15,000 psi (0 to 1,034 bar) T-1/OIL
This hydraulic pump includes Buna N o-rings, an AAA oil pressure medium, a manual manifold, and essential tools. Compatible with the Type T Series.



Ametek M&G T-607 Test Gauge, 4½", 0 to 35,000 kPa T-607
This test gauge measures 4½", 0 to 35,000 kPa and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-606 Test Gauge, 4½", 0 to 21,000 kPa T-606
This test gauge measures 4½", 0 to 21,000 kPa and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-605 Test Gauge, 4½", 0 to 4000 kPa T-605
This test gauge measures 4½", 0 to 4,000 kPa and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-604 Test Gauge, 4½", 0 to 200 kPa T-604
This test gauge measures 4½", 0 to 200 kPa and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-599 Test Gauge, 4½", 0 to 700 bar T-599
This test gauge measures 4½", 0 to 700 bar and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-598 Test Gauge, 4½", 0 to 350 bar T-598
This test gauge measures 4½", 0 to 350 bar and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-597 Test Gauge, 4½", 0 to 42 bar T-597
This test gauge measures 4½", 0 to 42 bar and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-596 Test Gauge, 4½", 0 to 11 bar T-596
This test gauge measures 4½", 0 to 11 bar and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-593 Test Gauge, 4½", 0 to 350 kg/cm2 T-593
This test gauge measures 4½", 0 to 350 kg/cm2 and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-592 Test Gauge, 4½", 0 to 210 kg/cm2 T-592
This test gauge measures 4½", 0 to 210 kg/cm2 and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-591 Test Gauge, 4½", 0 to 42 kg/cm2 T-591
This test gauge measures 4½", 0 to 42 kg/cm2 and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-590 Test Gauge, 0 to 2 kg/cm2, metric T-590
This test gauge measures 0 to 2 kg/cm2 and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-733-5 Hose, straight, ⅛" NPT male x ¼" NPT female T-733-5
Straight hose for the Type T Series with ⅛" NPT male x ¼" NPT female ends, 6.5' (2 m) in length.



Ametek M&G T-733-4 Hose, straight, ⅛" NPT male x ¼" NPT female T-733-4
Straight hose for the Type T Series with ⅛" NPT male x ¼" NPT female ends, 3.2' (1 m) in length.



Ametek M&G T-649 Hose, straight, ⅛" NPT male x ¼" NPT female T-649
Straight hose for the Type T Series with ⅛" NPT male x ¼" NPT female ends, 0.61 meters in length.



AMETEK Jofra 99-90019 Oil Dispenser 99-90019
Works with the type T hydraulic deadweight tester, the oil dispenser is an optional accessory.



AMETEK Jofra T-326 Pump Rebuild Kit, type T EPT T-326
Works with the type T hydraulic deadweight tester, the pump rebuild kit comes with type T EPT (optional material).



AMETEK Jofra T-559 326 Pump Rebuild Kit, type T VITON T-559
Works with the type T hydraulic deadweight tester, the pump rebuild kit comes with type T VITON (optional material).



AMETEK Jofra T-250 326 Pump Rebuild Kit, type T Buna N T-250
Works with the type T hydraulic deadweight tester, the pump rebuild kit comes with Buna N (standard material).



AMETEK Crystal 4714 MP Female to 0.25 NPT Male CPF Fitting 4714
The CPF fitting features an O-ring sealing system that permits leak-free connections without tools. The CPF fitting is also designed and tested to comply with ASME B31.3-2008, Chapter IX: High Pressure Piping.



AMETEK Crystal 4013 Quick Test NPT Kit 4013
Includes the MPF-1/8QTF, MPF-1/4QTF, and MPF-1/2QTF quick test females fittings.



AMETEK Crystal 4503 Non-Crystal Wrench-Tight MP Female to ½ NPT Female Adapter 4503
MP female to 1/2 NPT female adapter.



AMETEK Crystal 4495 Non-Crystal Wrench-Tight MP Female to ½ NPT Male Adapter 4495
MP female to 1/2 NPT male adapter.



AMETEK Crystal 4502 Non-Crystal Wrench-Tight MP Female to ⅜ NPT Female Adapter 4502
MP female to 3/8 NPT female adapter.



AMETEK Crystal 4494 Non-Crystal Wrench-Tight MP Female to ⅜ NPT Male Adapter 4494
MP female to 3/8 NPT male adapter.



AMETEK Crystal 4501 Non-Crystal Wrench-Tight MP Female to ⅛ NPT Female Adapter 4501
MP female to 1/8 NPT female adapter.



AMETEK Crystal 4015 BSP Test Kit 4015
Includes the MPF-1/8BSPF, MPF-1/4BSPF, MPF-3/8BSPF, and MPF-1/2BSPF BSP female to female adapters.



Ametek M&G SPK-T900-003 Handle Repair Kit SPK-T900-003
Handle repair kit, including plastic handles and pins for the Type T Series.



Ametek M&G T-535 Gauge Conversion kit T-535
This gauge conversion kit converts a HydraLite gauge into a tester and includes a pump, reservoir, connecting tubing, and fittings.



Ametek M&G T-573 Piston/Cylinder Assembly, 0.01 in2 T-573
This piston/cylinder assembly has a 0.01 in2 area. Compatible with the Type T Series.



Ametek M&G T-572 Piston/Cylinder Assembly, 0.05 in2 T-572
This piston/cylinder assembly has a 0.05 in2 area. Compatible with the Type T Series.



Poser une question sur le Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi

M&G T Hydraulic Comparator Series offre

Les comparateurs de pression servent de normes de pression secondaire, permettant des tests rapides et précis en comparant des instruments sur un collecteur de test sous pression avec des jauges d'essai de précision connue. Les comparateurs de type T comportent des pompes à main avec une soupape de commande manuelle à double volume pour une accumulation de pression rapide et un réglage fin. Le collecteur de test comprend un vernier pour le contrôle de la pression de la pompe.

Caractéristiques

  • Gamme de pression: 0 à 15,000 psi
  • Paramètres à volume élevé et faible
  • Deux ports de sortie
  • Grande capacité fluide
  • Ajustement fin jusqu'à 3500 psi
  • Compatible avec l'eau et l'huile
  • T-1-CPF comprend des raccords CPF
  • Conception éprouvée, robuste et portable
  • Tous les composants dans un cas
  • Gammes impériales ou métriques
  • Facile à configurer et à utiliser
  • Précision à ± 0.25% F.S.

Applications

  • Test et calibrer les manomètres, les vannes de décharge et les interrupteurs de pression
  • Pétrole et gaz
  • Médicaments
  • Production d'électricité
  • Laboratoires de recherche
En savoir plus...

Spécifications pour le M&G T Hydraulic Comparator Series

Taper Hydraulique
Plage de pression Pompe: 15,000 psi/1000 bar
Gauge: jusqu'à 10,000 psi (700 bar)
Remarque: Dépendant du modèle
Précision ± 0.025% de la jauge
10,000 psi/700 bar ± 0.50% de la jauge
Jauges 4 fourni (modèle à charge)
Source de pression Action de levier, pompe hydraulique à double volume à main
Moyen Mélange à eau/alcool distillé (standard)
Huile AAA (facultative vendue séparément) Spécifiez lors de la commande
Capacité du réservoir 75" 3 (1.23 L)
Déplacement Plage haute: 0.17 à 0.20"3 (2.8 à 3.2 cm2) par course
Plage faible: 0.018 à 0.024"3 (0.30 à 0.40 cm2) par AVC
Pièces mouillées Acier inoxydable, monel, laiton, ni-span C (jauges à température compensée uniquement), acier en carbone, buna n
Joints joints Buna N (Standard), EPT (Facultatif), Viton (facultatif) (spécifiez lors de la commande)
Connexions de test Type d'union: 0.64 cm (¼") NPT, 1.27 cm (½") NPT, 7⁄16 UNF - 0.64 cm (¼") BSP et 1.27 cm (½") BSP (avec des modèles métriques)
Jauges Analogique, lecture du visage de cadran
Unités d'ingénierie psi, kg/cm ² , bar, kpa
Cas 1
Configuration Ensemble de comparateur avec pompe et jauges, et boîtier de transport
Dimensions 40.6 x 52.4 x 27.9 cm (16 x 20.6 x 11")
Pompe: 79.4 x 22.9 x 50.8 cm (31.3 x 9 x 20")
Poids 24.95 kg (55 lbs)
Pompe: 9.1 kg (20 lbs)

Le M&G T Hydraulic Comparator Series comprend

  • Comparateur de type T
  • Certification traçable nist y compris les données
  • 4 x jauges d'essai
  • Pompe
  • Outils
  • Casse de soins
Brochure Complete Pressure Systems Brochure CPF Fittings brochure Ametek M&G Type T Series Hydraulic Comparator Tester Brochure datasheet pour le Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi manual pour le Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi.

Ametek M&G T-824 U-cup, nitrile T-824
Nitrile U-cup seal for the Type T Series.



Ametek M&G T-630 Valve Assembly, needle T-630
Valve assembly, needle mechanical parts for the Type T Series.



Ametek M&G T-628 Cap T-628
Cap mechanical parts for the Type T Series.



Ametek M&G T-595 Liner for the Type T Series body plate T-595
This liner is designed for the Type T Series body plate.



Ametek M&G T-633 Vernier Assembly T-633
Vernier assembly mechanical parts for the Type T Series.



Ametek M&G T-647 Nut T-647
Nut mechanical parts for the Type T Series.



Ametek M&G T-773 Handle T-773
Handle for the relief valve in the Type T Series.



Ametek M&G T-753 Filter T-753
Filter component for the Type T Series.



Ametek M&G T-664 Swivel Fitting Assembly T-664
Swivel fitting assembly for the Type T Series.



Ametek M&G T-657 Poppet T-657
Poppet valve part for the Type T Series.



Ametek M&G T-654 Spring, piston T-654
Mechanical spring component for the Type T Series.



Ametek M&G SPK-T900-001 Vernier and Vent Valve Assembly SPK-T900-001
Vernier and vent valve assembly for the Type T Series.



Ametek M&G SPK-T-001 Complete Handle and Piston Assembly SPK-T-001
Complete handle and piston assembly for the Type T Series.



Ametek M&G T-102 Handle Knob for the Type T series T-102
This handle knob is a mechanical part designed to use with the Type T Series.



Ametek M&G T-571 Carrier for HydraLite T-571
This carrier is designed for use with HydraLite. Compatible with the Type T Series.



Ametek M&G T-570 Retainer for HydraLite T-570
This retainer is designed for use with HydraLite. Compatible with the Type T Series.



Ametek M&G T-539 Protective container T-539
This protective container provides secure storage. Compatible with the Type T Series.



Ametek M&G T-534 Drawbar, 8 ⅛" T-534
This drawbar measures 8 ⅛" (20.6 cm). Compatible with the Type T Series.



Ametek M&G T-533 Drawbar, 6 ⅝" T-533
This drawbar measures 6 ⅝" (16.8 cm). Compatible with the Type T Series.



Ametek M&G T-532 Drawbar, 5 5⁄16" T-532
This drawbar measures 5 5⁄16" (13.5 cm). Compatible with the Type T Series.



Ametek M&G T-529 Washer for the Type T Series T-529
This washer is used for the weight stack drawbar. Compatible with the Type T Series.



Ametek M&G T-526 Tag for the Type T Series T-526
This tag is used for weight designation. Compatible with the Type T Series.



Ametek M&G T-103 Plug for the Type T Series, 9/16-18 UNF male T-103
This plug has a 9/16-18 UNF male connection. Compatible with the Type T Series.



Ametek M&G T-629 Fitting T-629
Fitting mechanical parts for the Type T Series.



Ametek M&G T-636 Fitting, swivel T-636
Swivel fitting mechanical parts for the Type T Series.



Ametek M&G T-823 Fitting T-823
Street tee fitting for the Type T Series.



Ametek M&G T-620 Hydraulic Handpump, 0 to 3000 psi (207 bar) T-620
Type T Hand pump with pistol-grip operation and AAA oil. Measures 0 to 3,000 psi (207 bar) for the Type T Series.



Ametek M&G T-811-M Pneumatic Handpump 2 to 25 "Hg, metric T-811-M
Pneumatic handpump measuring up to 2 to 25 inHg vacuum range with metric units. Compatible with the Type T Series.



Ametek M&G T-811 Pneumatic Handpump, 1 to 25 "Hg T-811
Pneumatic handpump for the Type T Series with 1 to 25 inHg vacuum range.



Ametek M&G T-810-M Pneumatic Handpump, 0 to 200 psi (14 bar), metric T-810-M
Pneumatic handpump measuring up to 0 to 200 psi (14 bar) pressure range with metric units for the Type T Series.



Ametek M&G T-810 Pneumatic Handpump, 0 to 200 psi (14 bar), imperial T-810
Pneumatic handpump measuring up to 0 to 200 psi (14 bar) pressure range with imperial units for the Type T Series.



Ametek M&G T-1/OIL Hydraulic Pump with o-rings, oil and tools, 0 to 15,000 psi (0 to 1,034 bar) T-1/OIL
This hydraulic pump includes Buna N o-rings, an AAA oil pressure medium, a manual manifold, and essential tools. Compatible with the Type T Series.



Ametek M&G T-607 Test Gauge, 4½", 0 to 35,000 kPa T-607
This test gauge measures 4½", 0 to 35,000 kPa and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-606 Test Gauge, 4½", 0 to 21,000 kPa T-606
This test gauge measures 4½", 0 to 21,000 kPa and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-605 Test Gauge, 4½", 0 to 4000 kPa T-605
This test gauge measures 4½", 0 to 4,000 kPa and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-604 Test Gauge, 4½", 0 to 200 kPa T-604
This test gauge measures 4½", 0 to 200 kPa and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-599 Test Gauge, 4½", 0 to 700 bar T-599
This test gauge measures 4½", 0 to 700 bar and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-598 Test Gauge, 4½", 0 to 350 bar T-598
This test gauge measures 4½", 0 to 350 bar and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-597 Test Gauge, 4½", 0 to 42 bar T-597
This test gauge measures 4½", 0 to 42 bar and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-596 Test Gauge, 4½", 0 to 11 bar T-596
This test gauge measures 4½", 0 to 11 bar and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-593 Test Gauge, 4½", 0 to 350 kg/cm2 T-593
This test gauge measures 4½", 0 to 350 kg/cm2 and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-592 Test Gauge, 4½", 0 to 210 kg/cm2 T-592
This test gauge measures 4½", 0 to 210 kg/cm2 and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-591 Test Gauge, 4½", 0 to 42 kg/cm2 T-591
This test gauge measures 4½", 0 to 42 kg/cm2 and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-590 Test Gauge, 0 to 2 kg/cm2, metric T-590
This test gauge measures 0 to 2 kg/cm2 and includes fittings and o-rings. Compatible with the Type T Series.



Ametek M&G T-733-5 Hose, straight, ⅛" NPT male x ¼" NPT female T-733-5
Straight hose for the Type T Series with ⅛" NPT male x ¼" NPT female ends, 6.5' (2 m) in length.



Ametek M&G T-733-4 Hose, straight, ⅛" NPT male x ¼" NPT female T-733-4
Straight hose for the Type T Series with ⅛" NPT male x ¼" NPT female ends, 3.2' (1 m) in length.



Ametek M&G T-649 Hose, straight, ⅛" NPT male x ¼" NPT female T-649
Straight hose for the Type T Series with ⅛" NPT male x ¼" NPT female ends, 0.61 meters in length.



AMETEK Jofra 99-90019 Oil Dispenser 99-90019
Works with the type T hydraulic deadweight tester, the oil dispenser is an optional accessory.



AMETEK Jofra T-326 Pump Rebuild Kit, type T EPT T-326
Works with the type T hydraulic deadweight tester, the pump rebuild kit comes with type T EPT (optional material).



AMETEK Jofra T-559 326 Pump Rebuild Kit, type T VITON T-559
Works with the type T hydraulic deadweight tester, the pump rebuild kit comes with type T VITON (optional material).



AMETEK Jofra T-250 326 Pump Rebuild Kit, type T Buna N T-250
Works with the type T hydraulic deadweight tester, the pump rebuild kit comes with Buna N (standard material).



AMETEK Crystal 4714 MP Female to 0.25 NPT Male CPF Fitting 4714
The CPF fitting features an O-ring sealing system that permits leak-free connections without tools. The CPF fitting is also designed and tested to comply with ASME B31.3-2008, Chapter IX: High Pressure Piping.



AMETEK Crystal 4013 Quick Test NPT Kit 4013
Includes the MPF-1/8QTF, MPF-1/4QTF, and MPF-1/2QTF quick test females fittings.



AMETEK Crystal 4503 Non-Crystal Wrench-Tight MP Female to ½ NPT Female Adapter 4503
MP female to 1/2 NPT female adapter.



AMETEK Crystal 4495 Non-Crystal Wrench-Tight MP Female to ½ NPT Male Adapter 4495
MP female to 1/2 NPT male adapter.



AMETEK Crystal 4502 Non-Crystal Wrench-Tight MP Female to ⅜ NPT Female Adapter 4502
MP female to 3/8 NPT female adapter.



AMETEK Crystal 4494 Non-Crystal Wrench-Tight MP Female to ⅜ NPT Male Adapter 4494
MP female to 3/8 NPT male adapter.



AMETEK Crystal 4501 Non-Crystal Wrench-Tight MP Female to ⅛ NPT Female Adapter 4501
MP female to 1/8 NPT female adapter.



AMETEK Crystal 4015 BSP Test Kit 4015
Includes the MPF-1/8BSPF, MPF-1/4BSPF, MPF-3/8BSPF, and MPF-1/2BSPF BSP female to female adapters.



Ametek M&G SPK-T900-003 Handle Repair Kit SPK-T900-003
Handle repair kit, including plastic handles and pins for the Type T Series.



Ametek M&G T-535 Gauge Conversion kit T-535
This gauge conversion kit converts a HydraLite gauge into a tester and includes a pump, reservoir, connecting tubing, and fittings.



Ametek M&G T-573 Piston/Cylinder Assembly, 0.01 in2 T-573
This piston/cylinder assembly has a 0.01 in2 area. Compatible with the Type T Series.



Ametek M&G T-572 Piston/Cylinder Assembly, 0.05 in2 T-572
This piston/cylinder assembly has a 0.05 in2 area. Compatible with the Type T Series.



Poser une question sur le Ametek M&G Type T Série Comparateur Hydraulique, jusqu'à 15,000 psi

Plus de produits M&G



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.