Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

4021 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

4021 COMMENTAIRES

WattsUp Series of Plug-In Power Meters

WattsUp Series of Plug-In Power Meters-

Demander à un expert

WattsUp Series of Plug-In Power Meters

A series of plug-in power meters for 120V single phase power monitoring applications.

A series of plug-in power meters for 120V single phase power monitoring applications.

Discontinué!

Ce produit a été discontinué et n’est plus disponible. Il n’y a pas de produit de remplacement direct. Ne vous inquiétez pas, nous avons quelques options pour vous aider à trouver ce dont vous avez besoin:

Visitez notre catégorie Compteurs d’électricité enfichables pour trouver des produits similaires.

Ou nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin:

Simply plug any device into Watts Up and the meter instantaneously displays the wattage (power) being used, as well as the cost in dollars and cents.

Watts Up provides lots of information yet it is simple to use. Only 6 values are displayed in the main modes. The other information is available in the detail mode. Clear English wording (not abbreviations) on the LCD is used to describe what is displayed.

Watts Up incorporates sophisticated digital electronics that enable precise and accurate measurements. State-of-the-art digital microprocessor design utilizes high-frequency sampling of both voltage and current measurements for true power. Power factor is captured so even phase-shifted loads such as motors are accurately measured. Fast, intuitive and easy-to-use, WattsUp? quickly and accurately measures any 120V AC appliance.

This Watts Up Standard Monitor will provide the following information: current watts, minimum watts, maximum watts, power factor, cumulative watt hours, average monthly kilowatt hours, tier 2 kilowatt hour threshold (used to calculate secondary kWh rates), elapsed time, cumulative cost, average monthly cost, line volts, minimum volts, maximum volts, current amps, minimum amps, and maximum amps, but does not have memory - you must write results down for your records. Note that this monitor's watt measure displays "true power", which factors in a device's power factor.

The Watts Up Pro (EED WU-P) has memory and comes with Windows reporting software and communications cable to chart results and also logs a few more parameters than the standard. The PRO model also displays Power cycle.

The Watts Up Pro (EED WU-P ES) has extended memory to save more data over a longer period of time than the Watts Up Pro. It also has Windows reporting software and communications cable.

All models display this information:

  • Cost - in dollars and cents
  • Average monthly cost
  • Average monthly kWh
  • True power
  • Cumulative power
  • Time
  • RMS voltage and current (amps)
  • Maximum & minimum RMS voltage & current
  • Maximum & minimum watts
  • Power factor
  • Duty cycle

Features

Standard Watts Up

  • 16 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility

Watts Up Pro

  • Internal Memory for over 2,000 Records (over 30,000 if just watts)
  • USB interface and logging capability
  • 18 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility
  • PC interface
  • Software included
  • Real-time logging capable (additional software required)
  • User selectable and automatic interval setting

Watts Up Pro ES

  • Extra Internal Memory for over 8,000 records (over 120,000 if just watts)
  • USB interface and logging capability
  • 18 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility
  • PC interface
  • Software included
  • Real-time logging capable (additional software required)
  • User selectable and automatic interval setting

Key Features

Standard Watts Up

  • 16 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility

Watts Up Pro

  • Internal Memory for over 2,000 Records (over 30,000 if just watts)
  • USB interface and logging capability
  • 18 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility
  • PC interface
  • Software included
  • Real-time logging capable (additional software required)
  • User selectable and automatic interval setting

Watts Up Pro ES

  • Extra Internal Memory for over 8,000 records (over 120,000 if just watts)
  • USB interface and logging capability
  • 18 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility
  • PC interface
  • Software included
  • Real-time logging capable (additional software required)
  • User selectable and automatic interval setting

Specifications

Standard Watts Up

  • Accuracy: +/- 3% (loads above 10 watts), +/-5% (loads below 10 watts)
  • Power Requirements: 120 Volts AC, 60 Hz, 15 amps (Below 60 watts, amps and power factor lose accuracy)
  • Dimensions: 18 cm long (7") x 10 cm wide (4") x 5 cm "2") thick
  • Weight: 0.7 kg (1.5 lbs)
  • Approvals: UL (C), UL (US)
  • Manufacturer Warranty: 1 Year
  • Higher ratings of 100-277v, 50/60Hz, and 20 amps require appropriate country specific cord set and receptacle, and is NOT UL listed.  Internal electronics are the same.
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord, output is via outlet on top of meter
  • Indoor use only

Watts Up Pro

  • Accuracy: +/- 3% (loads above 10 watts), +/-5% (loads below 10 watts)
  • Power Requirements: 120 Volts AC, 60 Hz, 15 amps (Below 60 watts, amps and power factor lose accuracy)
  • Dimensions: 18 cm long (7") x 10 cm wide (4") x 5 cm "2") thick
  • Weight: 0.7 kg (1.5 lbs)
  • Approvals: UL (C), UL (US)
  • Manufacturer Warranty: 1 Year
  • Higher ratings of 100-277v, 50/60Hz, and 20 amps require appropriate country specific cord set and receptacle, and is NOT UL listed.  Internal electronics are the same.
  • USB interface
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord, output is via outlet on top of meter
  • Indoor use only

Watts Up Pro ES

  • 120 v, 60 Hz, 15 amps
  • Higher ratings of 100-250v, 50/60Hz, and 15 amps require the universal outlet (UO) version. The electronics in the meter are capable of 20 amps but the cord and receptacle have different ratings. Verify the rating on the cordset you are purchasing.
  • +/- 1.5%, + 3 counts of the displayed value
  • Below 60 watts, amps and power factor lose accuracy
  • USB interface
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord (USA style only), output is via outlet on top of meter
  • Indoor use only
  • Dimensions: 7" x 4" x 2" (18cm x 10cm x 5cm)
  • Weight: 1.5 lbs (0.7 kg)
  • UL listed to standard UL 610010-1, and CAN CAS/C22.2 61010-1
  • UO version also CE marked
  • UL certification requires the following statement:
  • Altitude up to 2000 meters
  • Temperature 5°C to 40°C
  • Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C
  • Installation Category II

Specifications

Standard Watts Up

  • Accuracy: +/- 3% (loads above 10 watts), +/-5% (loads below 10 watts)
  • Power Requirements: 120 Volts AC, 60 Hz, 15 amps (Below 60 watts, amps and power factor lose accuracy)
  • Dimensions: 18 cm long (7") x 10 cm wide (4") x 5 cm "2") thick
  • Weight: 0.7 kg (1.5 lbs)
  • Approvals: UL (C), UL (US)
  • Manufacturer Warranty: 1 Year
  • Higher ratings of 100-277v, 50/60Hz, and 20 amps require appropriate country specific cord set and receptacle, and is NOT UL listed.  Internal electronics are the same.
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord, output is via outlet on top of meter
  • Indoor use only

Watts Up Pro

  • Accuracy: +/- 3% (loads above 10 watts), +/-5% (loads below 10 watts)
  • Power Requirements: 120 Volts AC, 60 Hz, 15 amps (Below 60 watts, amps and power factor lose accuracy)
  • Dimensions: 18 cm long (7") x 10 cm wide (4") x 5 cm "2") thick
  • Weight: 0.7 kg (1.5 lbs)
  • Approvals: UL (C), UL (US)
  • Manufacturer Warranty: 1 Year
  • Higher ratings of 100-277v, 50/60Hz, and 20 amps require appropriate country specific cord set and receptacle, and is NOT UL listed.  Internal electronics are the same.
  • USB interface
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord, output is via outlet on top of meter
  • Indoor use only

Watts Up Pro ES

  • 120 v, 60 Hz, 15 amps
  • Higher ratings of 100-250v, 50/60Hz, and 15 amps require the universal outlet (UO) version. The electronics in the meter are capable of 20 amps but the cord and receptacle have different ratings. Verify the rating on the cordset you are purchasing.
  • +/- 1.5%, + 3 counts of the displayed value
  • Below 60 watts, amps and power factor lose accuracy
  • USB interface
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord (USA style only), output is via outlet on top of meter
  • Indoor use only
  • Dimensions: 7" x 4" x 2" (18cm x 10cm x 5cm)
  • Weight: 1.5 lbs (0.7 kg)
  • UL listed to standard UL 610010-1, and CAN CAS/C22.2 61010-1
  • UO version also CE marked
  • UL certification requires the following statement:
  • Altitude up to 2000 meters
  • Temperature 5°C to 40°C
  • Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C
  • Installation Category II

Le ThinkTank WU comprend

  • WattsUp Series of Plug-In Power Meters

Poser une question sur le WattsUp Series of Plug-In Power Meters

Simply plug any device into Watts Up and the meter instantaneously displays the wattage (power) being used, as well as the cost in dollars and cents.

Watts Up provides lots of information yet it is simple to use. Only 6 values are displayed in the main modes. The other information is available in the detail mode. Clear English wording (not abbreviations) on the LCD is used to describe what is displayed.

Watts Up incorporates sophisticated digital electronics that enable precise and accurate measurements. State-of-the-art digital microprocessor design utilizes high-frequency sampling of both voltage and current measurements for true power. Power factor is captured so even phase-shifted loads such as motors are accurately measured. Fast, intuitive and easy-to-use, WattsUp? quickly and accurately measures any 120V AC appliance.

This Watts Up Standard Monitor will provide the following information: current watts, minimum watts, maximum watts, power factor, cumulative watt hours, average monthly kilowatt hours, tier 2 kilowatt hour threshold (used to calculate secondary kWh rates), elapsed time, cumulative cost, average monthly cost, line volts, minimum volts, maximum volts, current amps, minimum amps, and maximum amps, but does not have memory - you must write results down for your records. Note that this monitor's watt measure displays "true power", which factors in a device's power factor.

The Watts Up Pro (EED WU-P) has memory and comes with Windows reporting software and communications cable to chart results and also logs a few more parameters than the standard. The PRO model also displays Power cycle.

The Watts Up Pro (EED WU-P ES) has extended memory to save more data over a longer period of time than the Watts Up Pro. It also has Windows reporting software and communications cable.

All models display this information:

  • Cost - in dollars and cents
  • Average monthly cost
  • Average monthly kWh
  • True power
  • Cumulative power
  • Time
  • RMS voltage and current (amps)
  • Maximum & minimum RMS voltage & current
  • Maximum & minimum watts
  • Power factor
  • Duty cycle

Features

Standard Watts Up

  • 16 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility

Watts Up Pro

  • Internal Memory for over 2,000 Records (over 30,000 if just watts)
  • USB interface and logging capability
  • 18 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility
  • PC interface
  • Software included
  • Real-time logging capable (additional software required)
  • User selectable and automatic interval setting

Watts Up Pro ES

  • Extra Internal Memory for over 8,000 records (over 120,000 if just watts)
  • USB interface and logging capability
  • 18 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility
  • PC interface
  • Software included
  • Real-time logging capable (additional software required)
  • User selectable and automatic interval setting
En savoir plus...

Key Features

Standard Watts Up

  • 16 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility

Watts Up Pro

  • Internal Memory for over 2,000 Records (over 30,000 if just watts)
  • USB interface and logging capability
  • 18 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility
  • PC interface
  • Software included
  • Real-time logging capable (additional software required)
  • User selectable and automatic interval setting

Watts Up Pro ES

  • Extra Internal Memory for over 8,000 records (over 120,000 if just watts)
  • USB interface and logging capability
  • 18 values displayed
  • Cost displayed
  • 1.5% accuracy
  • World-wide compatibility
  • PC interface
  • Software included
  • Real-time logging capable (additional software required)
  • User selectable and automatic interval setting

Specifications

Standard Watts Up

  • Accuracy: +/- 3% (loads above 10 watts), +/-5% (loads below 10 watts)
  • Power Requirements: 120 Volts AC, 60 Hz, 15 amps (Below 60 watts, amps and power factor lose accuracy)
  • Dimensions: 18 cm long (7") x 10 cm wide (4") x 5 cm "2") thick
  • Weight: 0.7 kg (1.5 lbs)
  • Approvals: UL (C), UL (US)
  • Manufacturer Warranty: 1 Year
  • Higher ratings of 100-277v, 50/60Hz, and 20 amps require appropriate country specific cord set and receptacle, and is NOT UL listed.  Internal electronics are the same.
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord, output is via outlet on top of meter
  • Indoor use only

Watts Up Pro

  • Accuracy: +/- 3% (loads above 10 watts), +/-5% (loads below 10 watts)
  • Power Requirements: 120 Volts AC, 60 Hz, 15 amps (Below 60 watts, amps and power factor lose accuracy)
  • Dimensions: 18 cm long (7") x 10 cm wide (4") x 5 cm "2") thick
  • Weight: 0.7 kg (1.5 lbs)
  • Approvals: UL (C), UL (US)
  • Manufacturer Warranty: 1 Year
  • Higher ratings of 100-277v, 50/60Hz, and 20 amps require appropriate country specific cord set and receptacle, and is NOT UL listed.  Internal electronics are the same.
  • USB interface
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord, output is via outlet on top of meter
  • Indoor use only

Watts Up Pro ES

  • 120 v, 60 Hz, 15 amps
  • Higher ratings of 100-250v, 50/60Hz, and 15 amps require the universal outlet (UO) version. The electronics in the meter are capable of 20 amps but the cord and receptacle have different ratings. Verify the rating on the cordset you are purchasing.
  • +/- 1.5%, + 3 counts of the displayed value
  • Below 60 watts, amps and power factor lose accuracy
  • USB interface
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord (USA style only), output is via outlet on top of meter
  • Indoor use only
  • Dimensions: 7" x 4" x 2" (18cm x 10cm x 5cm)
  • Weight: 1.5 lbs (0.7 kg)
  • UL listed to standard UL 610010-1, and CAN CAS/C22.2 61010-1
  • UO version also CE marked
  • UL certification requires the following statement:
  • Altitude up to 2000 meters
  • Temperature 5°C to 40°C
  • Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C
  • Installation Category II

Specifications

Standard Watts Up

  • Accuracy: +/- 3% (loads above 10 watts), +/-5% (loads below 10 watts)
  • Power Requirements: 120 Volts AC, 60 Hz, 15 amps (Below 60 watts, amps and power factor lose accuracy)
  • Dimensions: 18 cm long (7") x 10 cm wide (4") x 5 cm "2") thick
  • Weight: 0.7 kg (1.5 lbs)
  • Approvals: UL (C), UL (US)
  • Manufacturer Warranty: 1 Year
  • Higher ratings of 100-277v, 50/60Hz, and 20 amps require appropriate country specific cord set and receptacle, and is NOT UL listed.  Internal electronics are the same.
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord, output is via outlet on top of meter
  • Indoor use only

Watts Up Pro

  • Accuracy: +/- 3% (loads above 10 watts), +/-5% (loads below 10 watts)
  • Power Requirements: 120 Volts AC, 60 Hz, 15 amps (Below 60 watts, amps and power factor lose accuracy)
  • Dimensions: 18 cm long (7") x 10 cm wide (4") x 5 cm "2") thick
  • Weight: 0.7 kg (1.5 lbs)
  • Approvals: UL (C), UL (US)
  • Manufacturer Warranty: 1 Year
  • Higher ratings of 100-277v, 50/60Hz, and 20 amps require appropriate country specific cord set and receptacle, and is NOT UL listed.  Internal electronics are the same.
  • USB interface
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord, output is via outlet on top of meter
  • Indoor use only

Watts Up Pro ES

  • 120 v, 60 Hz, 15 amps
  • Higher ratings of 100-250v, 50/60Hz, and 15 amps require the universal outlet (UO) version. The electronics in the meter are capable of 20 amps but the cord and receptacle have different ratings. Verify the rating on the cordset you are purchasing.
  • +/- 1.5%, + 3 counts of the displayed value
  • Below 60 watts, amps and power factor lose accuracy
  • USB interface
  • Mains supply voltage fluctuations not to exceed +/- 10% of the nominal voltage
  • Rate can be entered from $0.001 to $85.00 per kilowatt hour, in tenths of a penny
  • Input is via 6' electric cord (USA style only), output is via outlet on top of meter
  • Indoor use only
  • Dimensions: 7" x 4" x 2" (18cm x 10cm x 5cm)
  • Weight: 1.5 lbs (0.7 kg)
  • UL listed to standard UL 610010-1, and CAN CAS/C22.2 61010-1
  • UO version also CE marked
  • UL certification requires the following statement:
  • Altitude up to 2000 meters
  • Temperature 5°C to 40°C
  • Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C
  • Installation Category II

Le ThinkTank WU comprend

  • WattsUp Series of Plug-In Power Meters

Poser une question sur le WattsUp Series of Plug-In Power Meters



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.