Compact et sécuritaire, ce contrôleur de puissance monophasé offre une option à semi-conducteurs économique et polyvalente pour le contrôle du chauffage électrique. De plus, il possède un SCCR de 200KA avec un fusionnement approprié pour minimiser les dommages en cas de court-circuit, et présente une tension de ligne/charge de 277 à 600 V CA ainsi qu'une entrée de commande de 4.5 à 32 V CC.
Compact et sécuritaire, ce contrôleur de puissance monophasé offre une option à semi-conducteurs économique et polyvalente pour le contrôle du chauffage électrique. De plus, il possède un SCCR de 200KA avec un fusionnement approprié pour minimiser les dommages en cas de court-circuit, et présente une tension de ligne/charge de 277 à 600 V CA ainsi qu'une entrée de commande de 4.5 à 32 V CC.
Caractéristiques
Applications
| Operator Interface | Control input and indication light Alarm output and indication light |
| Phase | Single-phase, one controlled leg |
| Amperage Rating | Maximum surge current for 16.6 ms, 380 A peak Maximum I2t for fusing is 4000 A2s Latching current: 400 mA maximum Holding current: 200 mA maximum Off-state leakage 1 mA at 77°F (25°C) maximum Power dissipation = 1.2 W/A per leg switched 200KA SCCR, Type 1 and 2 approved with the recommended fusing |
| Line Voltage | 277 to 600 V AC |
| Control Mode, Zero Cross | V DC input, contactor output |
| Control Input | DC contactor: 4.5 to 32 V DC; maximum current at 4.5 V DC is 6 mA per leg Add 2 mA per LED used to the total current |
| Alarm Output | Energizes on alarm, non-latching Triac 24 to 240 V AC, external supply with a current rating of 300 mA at 77°F (25°C), 200 mA at 122°F (50°C), 100 mA at 176°F (80°C) and a holding current of 200 μA with a latching current of 5 mA typical |
| Terminals | Control input: Compression: Will accept 24 to 16 AWG (0.2. to 1.5 mm2) wire Line and load: Compression: Will accept 18 to 8 AWG (0.8 to 8.4 mm2) wire |
| Operating Environment | 0 to 90% RH (relative humidity), non-condensing Storage temperature: -40 to 185°F (-40 to 85°C) Operating temperature: -4 to 176°F (-20 to 80°C) Insulation tested to 9842.52' (3000 m) |
| Mounting | DIN-rail: DIN EN 50022, 1.4 x 0.3" (35 x 7.5 mm) Back-panel: Four mounting holes No. 6 to No. 8 (M3 to M4) fastener |
| Agency Approvals | CE with proper filter: 204/108/EC Electromagnetic Compatibility Directive EN 61326-1: Industrial Immunity Class A Emissions 2006/95/EC Low Voltage Directive EN 50178 Safety Requirements Installation category III, pollution degree 2 UL® 508 listed and C-UL® File E73741 2011/65/EU RoHS 2 |
| Dimensions | 3.7 x 3.3 x 4.9" (94 x 83 x 124 mm) |
| Weight | 1.5 lbs (0.68 kg) |
| Operator Interface | Control input and indication light Alarm output and indication light |
| Phase | Single-phase, one controlled leg |
| Amperage Rating | Maximum surge current for 16.6 ms, 380 A peak Maximum I2t for fusing is 4000 A2s Latching current: 400 mA maximum Holding current: 200 mA maximum Off-state leakage 1 mA at 77°F (25°C) maximum Power dissipation = 1.2 W/A per leg switched 200KA SCCR, Type 1 and 2 approved with the recommended fusing |
| Line Voltage | 277 to 600 V AC |
| Control Mode, Zero Cross | V DC input, contactor output |
| Control Input | DC contactor: 4.5 to 32 V DC; maximum current at 4.5 V DC is 6 mA per leg Add 2 mA per LED used to the total current |
| Alarm Output | Energizes on alarm, non-latching Triac 24 to 240 V AC, external supply with a current rating of 300 mA at 77°F (25°C), 200 mA at 122°F (50°C), 100 mA at 176°F (80°C) and a holding current of 200 μA with a latching current of 5 mA typical |
| Terminals | Control input: Compression: Will accept 24 to 16 AWG (0.2. to 1.5 mm2) wire Line and load: Compression: Will accept 18 to 8 AWG (0.8 to 8.4 mm2) wire |
| Operating Environment | 0 to 90% RH (relative humidity), non-condensing Storage temperature: -40 to 185°F (-40 to 85°C) Operating temperature: -4 to 176°F (-20 to 80°C) Insulation tested to 9842.52' (3000 m) |
| Mounting | DIN-rail: DIN EN 50022, 1.4 x 0.3" (35 x 7.5 mm) Back-panel: Four mounting holes No. 6 to No. 8 (M3 to M4) fastener |
| Agency Approvals | CE with proper filter: 204/108/EC Electromagnetic Compatibility Directive EN 61326-1: Industrial Immunity Class A Emissions 2006/95/EC Low Voltage Directive EN 50178 Safety Requirements Installation category III, pollution degree 2 UL® 508 listed and C-UL® File E73741 2011/65/EU RoHS 2 |
| Dimensions | 3.7 x 3.3 x 4.9" (94 x 83 x 124 mm) |
| Weight | 1.5 lbs (0.68 kg) |
