This automotive waveform viewer captures voltage signals up to ±150V with a sample rate of 1 Ms/Sec for high-resolution diagnostic analysis. An auto-set function adjusts the time and voltage scales to the detected signal, while zoom and pan tools facilitate detailed inspection of specific wave forms on the color LCD. Additionally, the included 4 GB Micro SD card stores waveform snapshots for later review on the tool or a PC.
This automotive waveform viewer captures voltage signals up to ±150V with a sample rate of 1 Ms/Sec for high-resolution diagnostic analysis. An auto-set function adjusts the time and voltage scales to the detected signal, while zoom and pan tools facilitate detailed inspection of specific wave forms on the color LCD. Additionally, the included 4 GB Micro SD card stores waveform snapshots for later review on the tool or a PC.
Use Auto Wave to quickly verify the presence of signals and voltages in waveform format on a voltage/time scale, without the need for a scope and with more detail than a DVOM. It can display waveforms for ignition primary, fuel injectors, MAF, O2, TPS, crank and cam sensors, PWM components, and more. With the optional SIP Adapter (75300), sold separately, it can also display waveforms for secondary ignition wires and COP ignition systems.
Caractéristiques
| Voltage Ranges | 150 V, 100 V, 50 V, 20 V, 10 V, 5 V, 2 V, 1 V |
| Sample Rate | 1 Ms/Sec at 100uS/Division |
| Voltage Input Range | + or - 150 V (approximately 170 V P/P viewable on LCD |
| Volt Meter | + or - 150 V DC |
| Accuracy | + or -2 percent FS (per range) |
| Storage | up to 9999 waves on SD card |
| Voltage Ranges | 150 V, 100 V, 50 V, 20 V, 10 V, 5 V, 2 V, 1 V |
| Sample Rate | 1 Ms/Sec at 100uS/Division |
| Voltage Input Range | + or - 150 V (approximately 170 V P/P viewable on LCD |
| Volt Meter | + or - 150 V DC |
| Accuracy | + or -2 percent FS (per range) |
| Storage | up to 9999 waves on SD card |
