Featuring six small pockets on its exterior sides, the DH2 is perfect for holding 2 to 4" (5 to 10 cm) bits, extensions, and nut drivers. A horizontal strip of webbing along the top provides an accessible spot for short driver tips and a place to store the safety lanyard clip when working at ground level.
Featuring six small pockets on its exterior sides, the DH2 is perfect for holding 2 to 4" (5 to 10 cm) bits, extensions, and nut drivers. A horizontal strip of webbing along the top provides an accessible spot for short driver tips and a place to store the safety lanyard clip when working at ground level.
A slot behind the front panel is a handy location to clip a tape measure. The DH2 offers two options for attaching itself to a belt or tool bag: a belt pass-through or the option to add our stainless steel Repositionable Belt Clip ( sold separately, NOT INCLUDED WITH DH2 ) to the vertical molle on the rear. The DH2 includes a unique bottom flap that secures closed to either protect a drill chuck/driver bit or allow the holster volume to instead store various hand tools or spare parts. When left open long bits and extensions can extend through and the open flap provides additional protection to the hip from a sharp bit.
Caractéristiques
| Max Payload | 10 lbs (4.5 kg) |
| Dimensions | 11.5 x 6 x 3" (29 x 15 x 7.5 cm) |
| Weight | 0.6 lbs (0.3 kg) |
| Max Payload | 10 lbs (4.5 kg) |
| Dimensions | 11.5 x 6 x 3" (29 x 15 x 7.5 cm) |
| Weight | 0.6 lbs (0.3 kg) |
