Three Phase Enercept Power Transducer for 208/277V Systems with 4-20mA Output - 100A, Small.
Three Phase Enercept Power Transducer for 208/277V Systems with 4-20mA Output - 100A, Small.
Discontinué!
Ce produit a été discontinué et n’est plus disponible. Il n'y a aucune option de remplacement.
Nous pouvons vous aider à trouver ce dont vous avez besoin:
The Enercept H8043-0100-2 is a set of three small split core CTs for kW (real power)/kWh (consumption) monitoring, designed for use with unbalanced loads. This model is a 208/240V, 100A max unit with an output of 4 to 20mA. The CTs continuously measure voltage and current values of monitored conductors and are able to provide highly accurate true RMS power measurements with a +/-1% total system accuracy. The transducers are designed to identify and compensate for phase reversal, for your convenience. Split-core installation means there is no need to remove conductors, and installation is easy. The Enercept H8043 is ideal for energy management, performance, and cost monitoring in commercial and industrial facilities as well as for use with process control applications.
Specifications:
† Contact factory to interface with voltages above 480 VAC or current above 2400 Amps.
†† Do not apply 600V Class current transformers to circuits having a phase-to-phase voltage greater than 600V, unless adequate additional insulation is applied between the primary conductor and the current transformers. Veris assumes no responsibility for damage of equipment or personal injury caused by products operated on circuits above their published ratings.
* Count must be multiplied by the number of phases when using single CT models to monitor balanced multiphase systems.
† Contact factory to interface with voltages above 480 VAC or current above 2400 Amps.
†† Do not apply 600V Class current transformers to circuits having a phase-to-phase voltage greater than 600V, unless adequate additional insulation is applied between the primary conductor and the current transformers. Veris assumes no responsibility for damage of equipment or personal injury caused by products operated on circuits above their published ratings.
* Count must be multiplied by the number of phases when using single CT models to monitor balanced multiphase systems.
