Three Phase Enercept Power Transducer with N2 Protocol - Energy Only - 400A, Medium.
Three Phase Enercept Power Transducer with N2 Protocol - Energy Only - 400A, Medium.
Discontinué!
Ce produit a été discontinué et n’est plus disponible. Il n’y a pas de produit de remplacement direct. Ne vous inquiétez pas, nous avons quelques options pour vous aider à trouver ce dont vous avez besoin:
Visitez notre catégorie Électricité pour trouver des produits similaires.
Ou nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin:
The Enercept H8025/H8026 are an innovative three-phase networked power transducers that combines electronics and high accuracy industrial grade CTs in a single package. The need for external electrical enclosures is eliminated, greatly reducing installation time and cost. Color-coordination between voltage leads and CTs makes phase matching easy. Additionally, these transducers automatically detect and compensate for phase reversal, eliminating the concern of CT load orientation. Up to 63 Transducers can be daisy-chained on a single RS-485 network.
Applications
Cost Effective Meter
| Input Primary Voltage | 208 to 480VAC RMS |
| Number of Phases Monitored | 1 to 3 |
| Frequency | 50/60Hz |
| Primary Current | Up to 2400 amps cont. per phase |
| Internal Isolation | 2000VAC RMS |
| Insulation Class | 600VAC RMS |
| Temperature Range | 0 to 60°C (32 to 140°F) |
| Humidity Range | 0 to 95% non-condensing |
| Systems Accuracy | ±1% of reading from 10% to 100% of the rated current of the CTs Accomplished by matching the CTs with a meter and calibrating them as a system |
| Output Physical Characteristics | RS-485, 2 wire + shield Baud Rate 9600, 8N1 format |
| Protocol Modbus | RTU |
| Input Primary Voltage | 208 to 480VAC RMS |
| Number of Phases Monitored | 1 to 3 |
| Frequency | 50/60Hz |
| Primary Current | Up to 2400 amps cont. per phase |
| Internal Isolation | 2000VAC RMS |
| Insulation Class | 600VAC RMS |
| Temperature Range | 0 to 60°C (32 to 140°F) |
| Humidity Range | 0 to 95% non-condensing |
| Systems Accuracy | ±1% of reading from 10% to 100% of the rated current of the CTs Accomplished by matching the CTs with a meter and calibrating them as a system |
| Output Physical Characteristics | RS-485, 2 wire + shield Baud Rate 9600, 8N1 format |
| Protocol Modbus | RTU |
