Uview 590250SK offre

Formulated for use in MiST vehicle sanitizing services, this solution contains 0.15% alkyl (60% C14, 30% C16, 5% C18) dimethyl benzyl ammonium chlorides and 0.15% alkyl (68% C12, 32% C14) dimethyl ethyl benzyl ammonium chlorides. It is registered under EPA Reg. No. 1839-220 to 96845 and is listed on EPA List N for use against SARS-CoV-2 (COVID-19). The formula is effective against bacteria, including MRSA, with a 2-minute contact time, and against viruses in as little as 30 seconds, with a 5-minute recommended contact time for SARS-CoV-2.

During the MiST service, the sprayed solution remains in place throughout the treatment, exceeding the required contact times before any excess is wiped away at the end of the process. Designed for ultrasonic application through the vehicle HVAC system, the solution is dispensed using an ultrasonic cleaning machine placed in the passenger floorboard with the A/C system on recirculation mode. The typical dispensing time is 15 minutes.

This method is especially effective on the evaporator, as the fine droplets are carried through the inlet vent, coalesce, and cover the entire core. The solution has been shown to continue working for up to 14 days after application. One 32-ounce (946 ml) bottle is sufficient to treat more than 12 passenger cars or light trucks, with testing indicating that 2 ounces (59 ml) can cover the average vehicle interior. It contains quaternary ammonium, triethylene glycol (TEG), and an odor absorber, with no added fragrance.

Caractéristiques

• Designed to disinfect and sanitize vehicle interior touchpoints while treating the entire HVAC system and interior air spaces for sources of mold, mildew, and bacteria
• Mist x-treme sanitizing solution
• Contains both alkyl (60% C14, 30% C16, 5% C18) dimethyl benzyl ammonium chlorides.15% and alkyl (68% C12, 32% C14) dimethyl ethyl benzyl ammonium chlorides.15%
• Effective against bacteria, including MRSA, with 2-minute contact time and viruses in as little as 30 second contact timesars-cov-2 (covid-19) contact time recommendation is 5 minutes
• Sanitizing instructions are to allow sprayed-on solution to remain in place during the entire mist service, far exceeding all contact time requirements, then wiping away any excess at the end of the mist service
• One 32-ounce (946 ml) bottle is more than enough to treat 12 passenger cars/light trucks, tests indicated that 2-ounces (59 ml) were needed to cover the average vehicle's interior
• Ultrasonic cleaning solutions are those distributed through the vehicle HVAC system using an ultrasonic cleaning machine placed in the passenger floorboard and operated with the AC system on and in recirculation mode
• The EPA requires additional efficacy testing to make claimseven with registered chemicalsthat are dispensed by "fogging or misting." the typical dispensing time is 15 minutes
• The mist ultrasonic treatment is particularly effective on the evaporator as the small droplets can be carried in mass through the inlet vent to the evaporator, they coalesce and cover the entire core, the mist solution has been shown to continue working up to 14 days after application
• Contains quaternary ammonium, triethylene glycol (TEG), and an odor absorber, it has no added odor but leaves a clean, fresh feeling in the air