Constructed with a steel housing, this pneumatic die grinder uses a 0.9 HP motor to maintain 22000 RPM for high stall resistance. The ¼" (6.4 mm) collet accommodates wheels up to 2" (5.1 cm) in diameter for material removal in industrial applications. Additionally, a safety lock-off throttle prevents accidental startup while the rear exhaust directs air away from the work area.
Constructed with a steel housing, this pneumatic die grinder uses a 0.9 HP motor to maintain 22000 RPM for high stall resistance. The ¼" (6.4 mm) collet accommodates wheels up to 2" (5.1 cm) in diameter for material removal in industrial applications. Additionally, a safety lock-off throttle prevents accidental startup while the rear exhaust directs air away from the work area.
Caractéristiques
Applications
| Model | UT8728SE |
| Motor | 0.9 HP |
| Max Wheel Diameter | 2" (5.1 cm) |
| Speed | 22,000 RPM |
| Exhaust | Rear |
| Spindle/Collet Size | 1/4" (6.4 mm) |
| Weight | 2.4 lbs (1.1 kg) |
| Length | 12.0" (30.5 cm) |
| Recommended Pressure | 90 psi (6.2 bar) |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec Hose (I.D.) | 3/8" (9.5 mm) |
| Air Cons (CFM) | 22 |
| Average (CFM) | 5.5 |
| Model | UT8728SE |
| Motor | 0.9 HP |
| Max Wheel Diameter | 2" (5.1 cm) |
| Speed | 22,000 RPM |
| Exhaust | Rear |
| Spindle/Collet Size | 1/4" (6.4 mm) |
| Weight | 2.4 lbs (1.1 kg) |
| Length | 12.0" (30.5 cm) |
| Recommended Pressure | 90 psi (6.2 bar) |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec Hose (I.D.) | 3/8" (9.5 mm) |
| Air Cons (CFM) | 22 |
| Average (CFM) | 5.5 |
