This belt sander utilizes a 0.25 HP motor to drive ½ x 12" (30.5 cm) belts at 20,000 RPM for light grinding, deburring, and engine port work. The head rotates 360 degrees to provide access in confined spaces, while interchangeable contact arms allow for various application requirements. Additionally, the 2.2 lbs (1 kg) tool includes a safety lock-off throttle and an ergonomic side handle for controlled operation.
This belt sander utilizes a 0.25 HP motor to drive ½ x 12" (30.5 cm) belts at 20,000 RPM for light grinding, deburring, and engine port work. The head rotates 360 degrees to provide access in confined spaces, while interchangeable contact arms allow for various application requirements. Additionally, the 2.2 lbs (1 kg) tool includes a safety lock-off throttle and an ergonomic side handle for controlled operation.
Belt Sander 1/2" (12.7 mm) X 12" (30.5 cm) Belt
Caractéristiques
| Model | UT8718 |
| Motor | 0.25 HP |
| Belt Size | 1/2" (12.7 mm) X 12" (30.5 cm) |
| Speed | 20,000 RPM |
| Exhaust | Handle |
| Weight | 2.2 lbs (1 kg). |
| Height | 12.0" (30.5 cm) |
| Rec Pressure | 90 PSI-6.2 Bar |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec Hose (I.D.) | 3/8" (9.5 mm) |
| Air Cons (cfm) | 16 |
| Average Air Cons (cfm) | 4 |
| Best for | Light grinding, sanding, deburring and engine port work |
| Model | UT8718 |
| Motor | 0.25 HP |
| Belt Size | 1/2" (12.7 mm) X 12" (30.5 cm) |
| Speed | 20,000 RPM |
| Exhaust | Handle |
| Weight | 2.2 lbs (1 kg). |
| Height | 12.0" (30.5 cm) |
| Rec Pressure | 90 PSI-6.2 Bar |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec Hose (I.D.) | 3/8" (9.5 mm) |
| Air Cons (cfm) | 16 |
| Average Air Cons (cfm) | 4 |
| Best for | Light grinding, sanding, deburring and engine port work |
