Uni-Trend Technology UTG9604T offre

The UTG9604 T Series is a 600 MHz, 4-channel waveform generator with a high sampling rate of up to 2.5 GSa/s, and a maximum waveform length of up to 64 Mpts.

Caractéristiques

• Ch 1/Ch 2 outputs maximum 600 MHz, Ch 3/Ch 4 outputs maximum 200 MHz
• Maximum sample rate for Ch 1/Ch 2 is 2.5 GSa/s, Ch 3/Ch 4 is 625 MSa/s
• Vertical resolution for Ch 1/Ch 2 is 16-bit and Ch 3/Ch 4 is 16-bit
• Equipped with three standard serial protocols - SPI, I2C, and UART - UTG9354T allows users to compile corresponding parameters and generate serial signal waveforms for each protocol
• Offers the capability to combine CH1 with CH2 and CH3 with CH4, providing exceptional real-time and true superposition features to display complex waveforms effectively
• This model comprises four channels, with CH1 and CH2 designated as the primary channels, while CH3 and CH4 belong to the secondary channels. Can be run in stand-alone or channel-coupling output mode
• Channel coupling: CH1 couples with CH2, and CH3 couples with CH4 through a channel coupling function
• Can output a PRBS wave, which is PN3, PN5, PN7, PN9, PN11, PN13, PN15, PN17, PN21, PN23, PN25, PN27, PN29, PN31, PN33
• Digital Protocol Output options: PRBS, SPI, I2C, UART
• Easily assess the Signal-to-Noise Ratio (SNR) on a continuous waveform with a single button press on UTG9354T
• Frequency sweep modes: Linear, Log, List Frequency, or Stepping Sweep
• Offers various output modes: Continuous, Modulate, Sweep, Burst, Protocol
• Burst types: N-Cycle, Infinite, Gated
• Maximum output: 20 Vp-p (50 Ω)
• Interface: USB device/Host, LAN, 10 MHz In/Out, Trigger, Modulation In, Counter. Can be controlled by SCPI commands over LAN
• Display: 10.1" (25.7 cm) LCD touch screen
• Certifications: cETLus, CE, RoHS, UKCA

Applications

• Classroom education
• Repair and maintenance
• Research and development
• Production line testing
• Circuit debugging