UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

Modèle: UP100STG

UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

Modèle: UP100STG

The Ultraprobe 100 is the perfect fit for someone looking for cost-effective analog ultrasonic inspection technology. The Ultraprobe senses high frequency sounds produced by operating equipment, leaks and electrical discharges.

The Ultraprobe 100 is the perfect fit for someone looking for cost-effective analog ultrasonic inspection technology. The Ultraprobe senses high frequency sounds produced by operating equipment, leaks and electrical discharges.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.

Il n’y a pas de remplacement direct, mais nous vous recommandons:

UE Systems UP100S Trousse scanner-

UE Systems UP100S Trousse scanner

Modèle: UP100S

Outil pratique pour la détection de toute fuite, l'inspection des purgeurs de vapeur ou le programme de dépannage mécanique. Facile à utiliser _ permets de trouver les fuites d'air comprimé et de vapeur et d'empêcher les pannes des machines.


Vous ne trouvez pas ce que vous cherchez? Nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin.


UE Systems UP100STG offre

Caractéristiques

  • Ultrasound is very directional and localized
  • Ultrasound can be easily blocked or shielded
  • Ultrasound instruments can be used in noisy environments
  • Changes in ultrasound provide early warning of potential problems
  • 8-position sensitivity dial with decibel indications
  • LED bar graph display in which each LED equals approximately 3 dB - ideal for calculating decibel level

Applications

  • Pressure and vacuum leak detection
  • Valve seat leak detection
  • Exhaust system leaks
  • Heat exchangers/boilers/condensers
  • Steam trap inspection
  • Bearing testing
  • Gear/gear box inspection
  • Wind/noise/water leaks
  • General mechanical inspection and trouble shooting
  • Tank/pipe leak testing
  • Electrical inspection

Spécifications pour le UE Systems UP100STG

Circuitry SMD/Solid state hybrid heterodyne receiver
Frequency Response 20 to 100 kHz (centered at 38 to 42 kHz)
Indicator 10 segment LED bar graph (red)
Sensitivity Selection 8 position precision attenuation
Headset Noise isolating type: double headset wired monophonic impedance; 16Ω. Over 23dB noise attenuation. Meets ANSI specifications & OSHA standards
Probes Scanning Module (SCM-1): Stainless steel unisonic (single transducer) piezo electric crystal type
Rubber Focusing Probe: Shields stray ultrasonic signals & focuses detected signal
Transmitter Patented warble tone transmission
Response Time 300 m/sec
Power Supply 9 V alkaline battery
Dimensions 5.25 x 2 x 8" (133 x 50 x 203 mm)
Weight 11 oz (0.3 kg)

Le UE Systems UP100STG comprend

  • Pistol Housing with LED Bar Graph Meter
  • 8 Position Sensitivity Selection
  • Low Battery Indicator
  • Scanning Module
  • Warble Tone Generator with Battery Charger
  • Lightweight Foam Lined Headset
  • 9 V Alkaline Battery Recharger
  • Cordura Soft Pack
  • Instruction Manual

Poser une question sur le UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

UE Systems UP100STG offre

Caractéristiques

  • Ultrasound is very directional and localized
  • Ultrasound can be easily blocked or shielded
  • Ultrasound instruments can be used in noisy environments
  • Changes in ultrasound provide early warning of potential problems
  • 8-position sensitivity dial with decibel indications
  • LED bar graph display in which each LED equals approximately 3 dB - ideal for calculating decibel level

Applications

  • Pressure and vacuum leak detection
  • Valve seat leak detection
  • Exhaust system leaks
  • Heat exchangers/boilers/condensers
  • Steam trap inspection
  • Bearing testing
  • Gear/gear box inspection
  • Wind/noise/water leaks
  • General mechanical inspection and trouble shooting
  • Tank/pipe leak testing
  • Electrical inspection

Spécifications pour le UE Systems UP100STG

Circuitry SMD/Solid state hybrid heterodyne receiver
Frequency Response 20 to 100 kHz (centered at 38 to 42 kHz)
Indicator 10 segment LED bar graph (red)
Sensitivity Selection 8 position precision attenuation
Headset Noise isolating type: double headset wired monophonic impedance; 16Ω. Over 23dB noise attenuation. Meets ANSI specifications & OSHA standards
Probes Scanning Module (SCM-1): Stainless steel unisonic (single transducer) piezo electric crystal type
Rubber Focusing Probe: Shields stray ultrasonic signals & focuses detected signal
Transmitter Patented warble tone transmission
Response Time 300 m/sec
Power Supply 9 V alkaline battery
Dimensions 5.25 x 2 x 8" (133 x 50 x 203 mm)
Weight 11 oz (0.3 kg)

Le UE Systems UP100STG comprend

  • Pistol Housing with LED Bar Graph Meter
  • 8 Position Sensitivity Selection
  • Low Battery Indicator
  • Scanning Module
  • Warble Tone Generator with Battery Charger
  • Lightweight Foam Lined Headset
  • 9 V Alkaline Battery Recharger
  • Cordura Soft Pack
  • Instruction Manual

Poser une question sur le UE Systems UP100STG Ultraprobe 100 Scanner Tone Generator Kit

Plus de produits UE Systems