Use this frequency meter to measure from 2 to 400 Hz AC or DC. Install it into paneling that is at least 2.09" (53 mm) deep.
Use this frequency meter to measure from 2 to 400 Hz AC or DC. Install it into paneling that is at least 2.09" (53 mm) deep.
Monitor your equipment with ease by using the Trumeter APM-FREQ-APO APM Frequency Meter with Outputs. Measuring AC or DC frequencies between 2 and 400 Hz, this meter is perfect for a variety of applications. Plus, it comes equipped with user-friendly features like a wide-angle display for easy viewing, analog and digital measurement, visual alarms and more. May be installed into paneling 2.09" (53 mm) deep or greater.
Features
| Input Range | 2 to 400 Hz |
| Impedance | 1.5 mΩ |
| Accuracy | 0.5% |
| Resolution | 0.1 Hz |
| Sample Rate | 62 kHz |
| Measurement Mode | Frequency |
| Measurement Category | CATII |
| Signal Level | 10 V minimum, 528 V maximum |
| Environment | Operating temperature: 14 to 140°F (-10 to 60°C); storage temperature: -40 to 158°F (-40 to 70°C) |
| IP Rating | IP65 (from the front) |
| Power Supply | 12 to 24 VAC/VDC |
| Display | Positive LCD with dynamic backlighting and four 0.47" (12 mm) digits (4 message characters) |
| Output | Maximum voltage: 34 V; maximum current: 500 mA; analog output: 4 to 20 mA |
| Compliance | UL, cUL, CE |
| Bar Graph | Yes (40-segment) |
| Product Length | 2.83" (72 mm) |
| Product Width | 2.83" (72 mm) |
| Product Height | 2.09" (53 mm) |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Trumeter APM-FREQ-APO APM Frequency Meter with Outputs, Positive LCD, 2 to 400 Hz.
| Input Range | 2 to 400 Hz |
| Impedance | 1.5 mΩ |
| Accuracy | 0.5% |
| Resolution | 0.1 Hz |
| Sample Rate | 62 kHz |
| Measurement Mode | Frequency |
| Measurement Category | CATII |
| Signal Level | 10 V minimum, 528 V maximum |
| Environment | Operating temperature: 14 to 140°F (-10 to 60°C); storage temperature: -40 to 158°F (-40 to 70°C) |
| IP Rating | IP65 (from the front) |
| Power Supply | 12 to 24 VAC/VDC |
| Display | Positive LCD with dynamic backlighting and four 0.47" (12 mm) digits (4 message characters) |
| Output | Maximum voltage: 34 V; maximum current: 500 mA; analog output: 4 to 20 mA |
| Compliance | UL, cUL, CE |
| Bar Graph | Yes (40-segment) |
| Product Length | 2.83" (72 mm) |
| Product Width | 2.83" (72 mm) |
| Product Height | 2.09" (53 mm) |
Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le Trumeter APM-FREQ-APO APM Frequency Meter with Outputs, Positive LCD, 2 to 400 Hz.
