Tramex IRT2 offre

The Roof and Wall Scanner detects and evaluates the moisture conditions within roofing and wall systems by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture in the material under the test. The Roof & Wall Scanner determines the strength of the current and converts this to a comparative moisture content value, displaying it on a large clear analog dial.

Caractéristiques

• Complies with ASTM D7954
• For non-destructive moisture evaluation of roofs, EIFS, foam insulation systems & other building envelope applications
• To evaluate the extent of the moisture problem and help trace and pin-point its source
• Multi-mode functions allowing for depth penetration and sensitivity selection
• Fast and easy to operate giving instant clear readings
• "Hold" function facilitates ease of recording readings
• Lightweight, handheld and battery operated
• Telescopic handle (for use on roofs)
• Inexpensive to purchase and operate compared to other non-destructive testing methods

Operating Procedure

Moisture detection testing can be done at the time of installation, as part of an ongoing maintenance program, or prior to reparation of damaged roofing and wall systems. The RWS us a handheld, hardwearing instrument with dual operating modes for roofing and EIFS/Foam insulation systems, each with two ranges of signal penetration. Having calibrated the RWS on a known acceptably dry area, the RWS gives instant readings for the moisture survey.

Warranty

All Tramex products carry a full satisfaction guarantee including a one year warranty against defects in parts & workmanship and a refund if the unit is returned, shipping pre-paid, in new condition within 21 days of original delivery. Proof of purchase is necessary.