TPI 714 Combustion Analyzer, O2, CO, NO, Temperature, and Pressure

5 tools in 1! The TPI 714 is an all-in-one instrument designed to maximize diagnostic efficiency and accuracy.

• Fast and easy set-up
• Fast purge and fuel selection during start-up reduces set-up time
• Measure O2, CO, and NO
• Calculate CO2, NOX, efficiency, excess and air ratio
• Selectable fuels: natural gas, light oil, heavy oil, LPG, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
• Will work with high efficiency furnaces, hot water heaters, and other combustible gas appliances
• Dual input K-type thermo-couple temperature tester
• Dual input differentialmanometer with 3 selectable units of measure: kPa, mBar, inH2O
• IR printer port use optional A740 Infrared Printer
• Protective rubber boot
• Soft carrying case

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Upgradable to NOX
• Dual input differential manometer with 3 selectable units of measure: kPa, mBar, inH20

• Carbon Monoxide (CO) Measurement: Range 0 to 10,000 ppm, Resolution 1 ppm, Accuracy +/-5ppm or 5% of reading whichever is greater
• Oxygen (02) Measurement: Range 0 to 25%, Resolution 0.1%, Accuracy ±0.3%
• Carbon Dioxide (CO2): Range 0 to 25%, Resolution 0.1%, Accuracy Calculated
• Nitric Oxide Measurement: Range 0 to 5,000ppm, Resolution 1ppm, Accuracy <100ppm: ±5ppm <1000ppm ±5% >1000ppm: ±10ppm
• NOX Measurement: Range 0 to 5,250, Resolution 1ppm, Accuracy Calculated
• Temperature Measurement: Range -40 to 1472°F, or -40 to 800°C, Resolution 1°F or °C, Accuracy (K-type) ±0.3%, ±2°F or ±1°C
• Draft/Pressure Measurement: Selectable Ranges mBar,kPa, and inH2O, Ranges -150 mBar to +150 mBar -15 kPa to +15 kPa -60 inH2O to +60 in H20, Resolution 0.01mBar, Accuracy ±0/5% fsd
• Gross/Net Efficiency: Range 0 to 100%, Resolution 0.1%, Accuracy Calculated
• CO/CO2 Ratio: Range 0 to 0.999, Resolution 0.001, Accuracy Calculated
• Operating Temperature: 14°F to 122°F (-10°C to 50°C)
• Charger Input Voltage: 110V to 230V (50/60Hz)
• Selectable Fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
• Display Type: Backlit 3 line LCD
• Data Storage: 10 Locations
• Data Logging: Yes (5 pages)
• Print Capability: Yes, via optional IR printer (A740)
• PC Communication: Yes via optional IR adapter (A767)
• Date & Time Function: 24 Hour Real Time Clock
• Dimensions: 200mm x 90mm x 60mm
• Weight: 500g
• Conformity: BS7927 (and the draft BS7967)