TPI 709R Combustion Analyzer with Rechargeable Ni-MH Batteries

Modèle: 709R | CUP: 637623057090

TPI 709R Combustion Analyzer with Rechargeable Ni-MH Batteries

Modèle: 709R | CUP: 637623057090

This combustion analyzer is a state of the art, easy to use analyzer designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion.

This combustion analyzer is a state of the art, easy to use analyzer designed not only to display and calculate the required readings from a flue but also to cover most of the other measurements associated with combustion.

Discontinué!

Ce produit a été discontinué et n’est plus disponible. Il n’y a pas de produit de remplacement direct. Ne vous inquiétez pas, nous avons quelques options pour vous aider à trouver ce dont vous avez besoin:

Visitez notre catégorie Analyseurs de gaz de combustion pour trouver des produits similaires.

Ou nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin:


TPI 709R offre

This combustion analyzer uses state of the art electrochemical sensors. This sensor technology provides the longest lasting, most accurate and reliable means for performing combustion tests. The sensors in your analyzer will need to be replaced periodically and calibration is recommended once every year. It will remind you when calibration is due by flashing "CAL DUE Err" for three seconds at start up.

Caractéristiques

  • Built-in differential manometer with 0.001" H2O resolution
  • Calculates combustion efficiency
  • Pump driven for fast response
  • Will not shut off if 15 ppm CO is present for increased safety
  • Ten selectable fuels: natural gas, LPG, light oil, heavy oil, bituminous coal, anthracite coal, coke, butane, wood, bagasse
  • Optional A740 IR printer available for hard copies of test results
  • Built-in differential thermometer
  • Store function to save up to 50 readings
  • Large easy to read backlit display

Applications

  • Test flue gases in gas and oil fired equipment
  • Test high efficiency furnaces and condensing boilers
  • Measure CO, O2, and stack temperature

Spécifications pour le TPI 709R

Operating Temperature Range 14 to 122°F (-10 to 50°C)
Power Supply Rechargeable Ni-MH
Battery Life Less than 6 hours
Charger Input Voltage 115V or 230V: 50/60 Hz AC
Fuels Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
Units of Pressure mbar, kPa, inH2O
Display 3 Line Backlit LCD with Annunciators
Time & Date 24 Hour Real Time Clock
Dimensions 7.8 x 3.5 x 2.4"
Weight 1.1 lbs

Le TPI 709R comprend

  • Combustion Analyzer
  • Rubber Boot
  • Battery Charger
  • Flue Sampling Probe
  • In-Line Filter
  • Temperature Probe
  • Mini Pump Protection Filter Assembly and Spare Filters
  • Exhaust Spigot
  • Soft Carrying Case
  • Instruction Manual

TPI 709R Combustion Analyzer Kit

Poser une question sur le TPI 709R Combustion Analyzer with Rechargeable Ni-MH Batteries

TPI 709R offre

This combustion analyzer uses state of the art electrochemical sensors. This sensor technology provides the longest lasting, most accurate and reliable means for performing combustion tests. The sensors in your analyzer will need to be replaced periodically and calibration is recommended once every year. It will remind you when calibration is due by flashing "CAL DUE Err" for three seconds at start up.

Caractéristiques

  • Built-in differential manometer with 0.001" H2O resolution
  • Calculates combustion efficiency
  • Pump driven for fast response
  • Will not shut off if 15 ppm CO is present for increased safety
  • Ten selectable fuels: natural gas, LPG, light oil, heavy oil, bituminous coal, anthracite coal, coke, butane, wood, bagasse
  • Optional A740 IR printer available for hard copies of test results
  • Built-in differential thermometer
  • Store function to save up to 50 readings
  • Large easy to read backlit display

Applications

  • Test flue gases in gas and oil fired equipment
  • Test high efficiency furnaces and condensing boilers
  • Measure CO, O2, and stack temperature

Spécifications pour le TPI 709R

Operating Temperature Range 14 to 122°F (-10 to 50°C)
Power Supply Rechargeable Ni-MH
Battery Life Less than 6 hours
Charger Input Voltage 115V or 230V: 50/60 Hz AC
Fuels Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
Units of Pressure mbar, kPa, inH2O
Display 3 Line Backlit LCD with Annunciators
Time & Date 24 Hour Real Time Clock
Dimensions 7.8 x 3.5 x 2.4"
Weight 1.1 lbs

Le TPI 709R comprend

  • Combustion Analyzer
  • Rubber Boot
  • Battery Charger
  • Flue Sampling Probe
  • In-Line Filter
  • Temperature Probe
  • Mini Pump Protection Filter Assembly and Spare Filters
  • Exhaust Spigot
  • Soft Carrying Case
  • Instruction Manual

TPI 709R Combustion Analyzer Kit

Poser une question sur le TPI 709R Combustion Analyzer with Rechargeable Ni-MH Batteries

Plus de produits TPI