Supporting lead-acid batteries from 20 to 2800Ah, this battery charger functions as a voltage stabilizer for ECU programming with a maximum output of 90A at 12V and 45A at 24V. It utilizes a 9-step charging cycle and six programmable modes-including supply, boost, and repair-to manage battery health while preventing overcharging. Integrated temperature sensors and protection against reverse polarity, short circuits, and overvoltage maintain safe operation during high-current tasks.
Supporting lead-acid batteries from 20 to 2800Ah, this battery charger functions as a voltage stabilizer for ECU programming with a maximum output of 90A at 12V and 45A at 24V. It utilizes a 9-step charging cycle and six programmable modes-including supply, boost, and repair-to manage battery health while preventing overcharging. Integrated temperature sensors and protection against reverse polarity, short circuits, and overvoltage maintain safe operation during high-current tasks.
| Input Voltage | 100 to 130 V 200 to 240 V |
| Output Current | 12 V 5 to 90 A 24 V 5 to 45 A |
| Charging Mode | 12 V/24 V - SUP/NORM/COLD/BOOST/REP |
| Applicable Batteries | 20 to 2800Ah |
| Clip Type | 1 pole clamp |
| AC Cable Length | 5' (1.5 m) 10" (25.4 cm) with AWG18 input |
| Clip Cord Length | 2.2 m |
| Input Voltage | 100 to 130 V 200 to 240 V |
| Output Current | 12 V 5 to 90 A 24 V 5 to 45 A |
| Charging Mode | 12 V/24 V - SUP/NORM/COLD/BOOST/REP |
| Applicable Batteries | 20 to 2800Ah |
| Clip Type | 1 pole clamp |
| AC Cable Length | 5' (1.5 m) 10" (25.4 cm) with AWG18 input |
| Clip Cord Length | 2.2 m |
