This is a handheld optical LED source that provides visible wavelengths at 470, 520, and 660 nm. Designed for plastic optical fiber (POF), multimode ribbon, and specialty visible applications, it is ideal for attenuation testing, polarity verification, and fiber identification. With rugged housing, traceable calibration, and long battery life, it is optimized for field and lab use.
This is a handheld optical LED source that provides visible wavelengths at 470, 520, and 660 nm. Designed for plastic optical fiber (POF), multimode ribbon, and specialty visible applications, it is ideal for attenuation testing, polarity verification, and fiber identification. With rugged housing, traceable calibration, and long battery life, it is optimized for field and lab use.
Caractéristiques
| Output Wavelengths | 470, 520, and 660 nm LED |
| Output Power | -7 dBm (typical at 1 mm POF) |
| Stability Over 15 min | 0.01 dB (typical, ±2°C, after warm-up) |
| Stability Over Temperature | 0.35 dB (typical) |
| Spectrum Width (FWHM) | 35 to 48 nm (typical, LED) |
| Wavelength Initial Tolerance | ±15 nm (at 25°C) |
| Reconnection Repeatability | <0.1 dB (95% confidence) |
| Modulation | 270 Hz 1 kHz 2 kHz ±2% 12 Multi-Fiber ID tones |
| Autotest | Not supported for 470, 520, and 660 nm LEDs |
| Output Power Accuracy | ±1 dB (at POF, 1 mm core) |
| Power | 2 × AA Alkaline/NiMH batteries Rechargeable via USB |
| Battery Life | 80 to 90 hours typical in Autotest mode |
| Display | 2.9 × 2.2" (74 × 55 mm) high contrast LCD |
| Case | Polycarbonate body with rubber edges Moisture resistant 1 m drop-tested |
| Temperature | Operating: 5 to 131°F (-15 to 55°C) Storage: -13 to 158°F (-25 to 70°C) Humidity: 0 to 95% RH |
| Warranty | 3 years |
| Dimensions | 7.5 x 4.1 x 1.4" (190 x 105 x 35 mm) |
| Weight | 0.93 lbs (420 g) |
| Output Wavelengths | 470, 520, and 660 nm LED |
| Output Power | -7 dBm (typical at 1 mm POF) |
| Stability Over 15 min | 0.01 dB (typical, ±2°C, after warm-up) |
| Stability Over Temperature | 0.35 dB (typical) |
| Spectrum Width (FWHM) | 35 to 48 nm (typical, LED) |
| Wavelength Initial Tolerance | ±15 nm (at 25°C) |
| Reconnection Repeatability | <0.1 dB (95% confidence) |
| Modulation | 270 Hz 1 kHz 2 kHz ±2% 12 Multi-Fiber ID tones |
| Autotest | Not supported for 470, 520, and 660 nm LEDs |
| Output Power Accuracy | ±1 dB (at POF, 1 mm core) |
| Power | 2 × AA Alkaline/NiMH batteries Rechargeable via USB |
| Battery Life | 80 to 90 hours typical in Autotest mode |
| Display | 2.9 × 2.2" (74 × 55 mm) high contrast LCD |
| Case | Polycarbonate body with rubber edges Moisture resistant 1 m drop-tested |
| Temperature | Operating: 5 to 131°F (-15 to 55°C) Storage: -13 to 158°F (-25 to 70°C) Humidity: 0 to 95% RH |
| Warranty | 3 years |
| Dimensions | 7.5 x 4.1 x 1.4" (190 x 105 x 35 mm) |
| Weight | 0.93 lbs (420 g) |
