Il s'agit d'un ensemble de test de perte optique (OLTS) portatif bidirectionnel qui intègre des sources DEL multimodes et laser monomodes avec un wattmètre InGaAs. Fonctionnant à 850, 1300, 1310 et 1550 nm, il effectue la mesure de longueur, les tests de perte et inclut la fonction VisiTester pour une identification rapide des fibres. Robuste, léger et calibré selon la norme ISO/IEC 17025, il est idéal pour la certification de fibre de niveau 1, le large bande et les applications d'entreprise.
Il s'agit d'un ensemble de test de perte optique (OLTS) portatif bidirectionnel qui intègre des sources DEL multimodes et laser monomodes avec un wattmètre InGaAs. Fonctionnant à 850, 1300, 1310 et 1550 nm, il effectue la mesure de longueur, les tests de perte et inclut la fonction VisiTester pour une identification rapide des fibres. Robuste, léger et calibré selon la norme ISO/IEC 17025, il est idéal pour la certification de fibre de niveau 1, le large bande et les applications d'entreprise.
Caractéristiques
| Source Wavelengths | 850 and 1300 nm LED 1310 and 1550 nm Laser |
| Source Output Power | LED: -39 / -29.5 dBm (typical) Laser: -7 dBm (typical) |
| Source Modulation | 270 Hz 1 kHz 2 kHz ±2% 12 Multi-Fiber ID tones 2 Hz blink for VisiTester |
| Reconnection Repeatability | <0.1 dB (95% confidence) |
| Stability | 0.04 to 0.06 dB (typical, 15 minutes, after warm-up) |
| Detector Type | InGaAs |
| Response Wavelength | 600 to 1700 nm |
| Calibration Wavelengths | 820, 850, 980, 1270, and 1650 nm (25+ λ) |
| Power Range | +10 to -70 dBm (InGaAs) |
| Tone and Autotest Sensitivity | -50 dBm |
| Midrange Linearity | 0.04 dB (typical) |
| Calibration Accuracy | ±1% (0.06 dB) |
| Total Uncertainty | 0.3 dB |
| ORL Measurement | Integrated (depends on setup, with APC connector preferred) |
| Memory | 10,000 fibers with text and timestamp Unlimited on USB key |
| Interfaces | USB-micro for power and software USB-A for memory key |
| Power | 2 × AA Alkaline/Lithium 2 × NiMH rechargeable via USB |
| Battery Life | 50 hours with source 100 hours in power meter mode (typical) |
| Display | 2.9 × 2.2" (74 × 55 mm) high contrast LCD Backlit Sunlight readable |
| Case | Polycarbonate body with rubber edges 1 m drop tested Moisture resistant |
| Temperature | Operating: 5 to 131°F (-15 to 55°C) Storage: -13 to 158°F (-25 to 70°C) Humidity: 0 to 95% RH |
| Warranty | 3 years |
| Dimensions | 7.5 × 4.1 × 1.4" (190 × 105 × 35 mm) |
| Weight | 0.93 lbs (420 g) |
| Source Wavelengths | 850 and 1300 nm LED 1310 and 1550 nm Laser |
| Source Output Power | LED: -39 / -29.5 dBm (typical) Laser: -7 dBm (typical) |
| Source Modulation | 270 Hz 1 kHz 2 kHz ±2% 12 Multi-Fiber ID tones 2 Hz blink for VisiTester |
| Reconnection Repeatability | <0.1 dB (95% confidence) |
| Stability | 0.04 to 0.06 dB (typical, 15 minutes, after warm-up) |
| Detector Type | InGaAs |
| Response Wavelength | 600 to 1700 nm |
| Calibration Wavelengths | 820, 850, 980, 1270, and 1650 nm (25+ λ) |
| Power Range | +10 to -70 dBm (InGaAs) |
| Tone and Autotest Sensitivity | -50 dBm |
| Midrange Linearity | 0.04 dB (typical) |
| Calibration Accuracy | ±1% (0.06 dB) |
| Total Uncertainty | 0.3 dB |
| ORL Measurement | Integrated (depends on setup, with APC connector preferred) |
| Memory | 10,000 fibers with text and timestamp Unlimited on USB key |
| Interfaces | USB-micro for power and software USB-A for memory key |
| Power | 2 × AA Alkaline/Lithium 2 × NiMH rechargeable via USB |
| Battery Life | 50 hours with source 100 hours in power meter mode (typical) |
| Display | 2.9 × 2.2" (74 × 55 mm) high contrast LCD Backlit Sunlight readable |
| Case | Polycarbonate body with rubber edges 1 m drop tested Moisture resistant |
| Temperature | Operating: 5 to 131°F (-15 to 55°C) Storage: -13 to 158°F (-25 to 70°C) Humidity: 0 to 95% RH |
| Warranty | 3 years |
| Dimensions | 7.5 × 4.1 × 1.4" (190 × 105 × 35 mm) |
| Weight | 0.93 lbs (420 g) |
