The PP006D is a high impedance passive probe with a wide range of probing accessories. It is designed to give high impedance probing capability to a circuit when attached to a LeCroy Oscilloscope.
The PP006D is a high impedance passive probe with a wide range of probing accessories. It is designed to give high impedance probing capability to a circuit when attached to a LeCroy Oscilloscope.
Discontinué!
Ce produit a été discontinué et n’est plus disponible. Il n’y a pas de produit de remplacement direct. Ne vous inquiétez pas, nous avons quelques options pour vous aider à trouver ce dont vous avez besoin:
Visitez notre catégorie Sondes de tension pour trouver des produits similaires.
Ou nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin:
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.
Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.
| Bandwidth | 500 MHz |
| Input R | 10 MΩ |
| Input C | 12 pF |
| Attenuation | 0.4173611111111111 |
| Maximum Voltage | 600 V |
| Recommended Oscilloscope | LT, WaveJet 300(A) ≤ 350 MHz |
| Bandwidth | 500 MHz |
| Input R | 10 MΩ |
| Input C | 12 pF |
| Attenuation | 0.4173611111111111 |
| Maximum Voltage | 600 V |
| Recommended Oscilloscope | LT, WaveJet 300(A) ≤ 350 MHz |
