Connect this trigger decode to your oscilloscope to take accurate measurements. The unit offers wide-ranging triggering support.
Connect this trigger decode to your oscilloscope to take accurate measurements. The unit offers wide-ranging triggering support.
When connected to your oscilloscope, this Teledyne LeCroy WS3K-FLEXRAYBUS TD FlexRay Trigger Decode provides support for frame ID, frame cycle count, frame qualifiers, symbols and errors. The color-coded overlays for specific portions of each protocol make it easy to decode the information.
Caractéristiques
| Trigger Format | Frame ID: hexadecimal, binary; Cycle Count: decimal |
| Trigger Setup | TSS (start), frame ID, cycle count, symbols, errors |
| Frame Setup | Frame ID: hexadecimal/binary with ≤, <, =, >, ≥, <>, in range, out of range, don't care condition, Cycle Count: 0 to 63 with ≤, <, =, >, ≥, <>, in range, out of range, don't care condition |
| Data Setup | Hexadecimal: 0 to 8 data bytes, Binary: 0, 1, X for 1 to 64 bits |
| Bit Rate | 2.5, 5, 10 MB/s pre-defined nominal values, user-defined nominal values in 1 MB/s increments |
| Decode + Search Format | Hexadecimal, excepting cycle count (decimal) |
| Visual Aid | Color Coding: Frame, TSS, CID, FSS, frame qualifiers, slot ID, payload length, header CRC, cycle count, data, BSS, payload CRC, FES |
| Table Configuration | 1 to 20 rows of decoded information for up to 4 protocols or decodes |
| Error Setup | Frame Start Sequence (FSS) error, Byte Start Sequence (BSS) error, Frame End Sequence (FES) error, Header CRC error, Payload CRC error |
| Source and Protocol Setup | Selectable source, BitRate, FlexRay Channel A or Channel B |
| Trigger Format | Frame ID: hexadecimal, binary; Cycle Count: decimal |
| Trigger Setup | TSS (start), frame ID, cycle count, symbols, errors |
| Frame Setup | Frame ID: hexadecimal/binary with ≤, <, =, >, ≥, <>, in range, out of range, don't care condition, Cycle Count: 0 to 63 with ≤, <, =, >, ≥, <>, in range, out of range, don't care condition |
| Data Setup | Hexadecimal: 0 to 8 data bytes, Binary: 0, 1, X for 1 to 64 bits |
| Bit Rate | 2.5, 5, 10 MB/s pre-defined nominal values, user-defined nominal values in 1 MB/s increments |
| Decode + Search Format | Hexadecimal, excepting cycle count (decimal) |
| Visual Aid | Color Coding: Frame, TSS, CID, FSS, frame qualifiers, slot ID, payload length, header CRC, cycle count, data, BSS, payload CRC, FES |
| Table Configuration | 1 to 20 rows of decoded information for up to 4 protocols or decodes |
| Error Setup | Frame Start Sequence (FSS) error, Byte Start Sequence (BSS) error, Frame End Sequence (FES) error, Header CRC error, Payload CRC error |
| Source and Protocol Setup | Selectable source, BitRate, FlexRay Channel A or Channel B |
