Teledyne LeCroy T3AFG5 Function/Arbitrary Waveform Generator, 5 MHz

Modèle: T3AFG5

Teledyne LeCroy T3AFG5 Function/Arbitrary Waveform Generator, 5 MHz

Modèle: T3AFG5

Featuring a single-channel waveform generator with a bandwidth of 5 MHz, and a memory of 16 kpts. It offers a wide range of modulation types that allows the user to quickly set up modulated waveforms. User-defined waveforms can be stored and recalled, and its 14 Bit high resolution provides low noise.

Featuring a single-channel waveform generator with a bandwidth of 5 MHz, and a memory of 16 kpts. It offers a wide range of modulation types that allows the user to quickly set up modulated waveforms. User-defined waveforms can be stored and recalled, and its 14 Bit high resolution provides low noise.

Discontinué!

Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :

Teledyne LeCroy T3AFG40 Générateur de fonctions/formes d'onde arbitraires, 40 MHz-

Teledyne LeCroy T3AFG40 Générateur de fonctions/formes d'onde arbitraires, 40 MHz

Modèle: T3AFG40

Doté d'un générateur de formes d'onde à deux canaux avec une bande passante de 40 MHz et une mémoire de 8 Mpts. Il offre une large gamme de types de modulation permettant à l'utilisateur de configurer rapidement des formes d'onde modulées. Les formes d'onde définies par l'utilisateur peuvent être stockées et rappelées, et sa haute résolution de 16 bits assure un faible niveau de bruit. TrueArb et EasyPulse permettent d'obtenir une variété de signaux à haute fidélité et à faible gigue.


Teledyne LeCroy T3AFG5 offre

Caractéristiques

  • Bandwidth of 5 MHz
  • 1 Channel
  • 16 kpts memory
  • USB host port for mass storage
  • USB device port (USBTMC)
  • Sweep output carrier can be Sine, Square, Triangle and Arbitrary waveforms
  • Burst output under internal or external signal control
  • Waveforms types include DC
  • Frequency resolution 1 uHz
  • DSB-AM: Double sideband AM modulation function
  • Multi-language user interface
  • Wide range of modulation types: AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, and Burst
  • Load and replay built in Arbitrary Waveforms
  • Store and recall user defined waveforms

Burst Mode

Burst mode supports ‘N Cycle' and ‘Gated' modes with the Burst source being configured as ‘Internal', ‘External' or ‘Manual'.

Sweep Mode

Sweep mode supports ‘Linear' and ‘Log' sweep, with ‘Up' and ‘Down' direction, and Sweep source being configured as ‘Internal', ‘External' or ‘Manual'.

Spécifications pour le Teledyne LeCroy T3AFG5

Bandwidth 5 MHz
Channels 1 channel
Memory 16 kpts/Ch
Sample Rate 125 MS/s
Display 3.5" (8.9 cm) TFT-LCD
Connectivity USB Host, USB Device
Built-in Waveforms 5 Standard, 46 Arbitrary
Input/Output 1 Waveform Output, Synchronous Signal Out, External Trigger In
Modulation Functions AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, Burst
TrueArb and EasyPulse No
Maximum Amplitude Output 10 Vpp at 50 Ohms, 20 Vpp at HiZ
Vertical D/A Resolution 14 Bits

Le Teledyne LeCroy T3AFG5 comprend

  • Function/Arbitrary Waveform Generator
  • Certificate of Calibration
  • Power Cord
  • USB Cable
  • Quick Start Guide

Poser une question sur le Teledyne LeCroy T3AFG5 Function/Arbitrary Waveform Generator, 5 MHz

Teledyne LeCroy T3AFG5 offre

Caractéristiques

  • Bandwidth of 5 MHz
  • 1 Channel
  • 16 kpts memory
  • USB host port for mass storage
  • USB device port (USBTMC)
  • Sweep output carrier can be Sine, Square, Triangle and Arbitrary waveforms
  • Burst output under internal or external signal control
  • Waveforms types include DC
  • Frequency resolution 1 uHz
  • DSB-AM: Double sideband AM modulation function
  • Multi-language user interface
  • Wide range of modulation types: AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, and Burst
  • Load and replay built in Arbitrary Waveforms
  • Store and recall user defined waveforms

Burst Mode

Burst mode supports ‘N Cycle' and ‘Gated' modes with the Burst source being configured as ‘Internal', ‘External' or ‘Manual'.

Sweep Mode

Sweep mode supports ‘Linear' and ‘Log' sweep, with ‘Up' and ‘Down' direction, and Sweep source being configured as ‘Internal', ‘External' or ‘Manual'.

Spécifications pour le Teledyne LeCroy T3AFG5

Bandwidth 5 MHz
Channels 1 channel
Memory 16 kpts/Ch
Sample Rate 125 MS/s
Display 3.5" (8.9 cm) TFT-LCD
Connectivity USB Host, USB Device
Built-in Waveforms 5 Standard, 46 Arbitrary
Input/Output 1 Waveform Output, Synchronous Signal Out, External Trigger In
Modulation Functions AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, Burst
TrueArb and EasyPulse No
Maximum Amplitude Output 10 Vpp at 50 Ohms, 20 Vpp at HiZ
Vertical D/A Resolution 14 Bits

Le Teledyne LeCroy T3AFG5 comprend

  • Function/Arbitrary Waveform Generator
  • Certificate of Calibration
  • Power Cord
  • USB Cable
  • Quick Start Guide

Poser une question sur le Teledyne LeCroy T3AFG5 Function/Arbitrary Waveform Generator, 5 MHz

Plus de produits Teledyne LeCroy