The PP011 is a miniature high impedance passive probe designed for use with ≥600 MHz Teledyne LeCroy oscilloscopes. Its high input resistance and low capacitance make it ideal for general purpose probing of signals with frequency content from DC through several hundred MHz.
The PP011 is a miniature high impedance passive probe designed for use with ≥600 MHz Teledyne LeCroy oscilloscopes. Its high input resistance and low capacitance make it ideal for general purpose probing of signals with frequency content from DC through several hundred MHz.
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.
Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.
| Bandwidth (Probe Only) | 500 MHz |
| Input Resistance | 10 MΩ |
| Input Capacitance | 9.5 pF |
| Maximum Input Voltage | 400 V |
| Attenuation | 0.4173611111111111 |
| Coupling | AC 1 MΩ, DC 1MΩ, GND |
| Recommended Oscilloscope | WaveRunner 6000(A) WaveRunner Xi(A) ≥ 1 GHz WaveSurfer Xs(A) ≥ 1 GHz WavePro 7 Zi, WaveMaster 8 Zi |
| Bandwidth (Probe Only) | 500 MHz |
| Input Resistance | 10 MΩ |
| Input Capacitance | 9.5 pF |
| Maximum Input Voltage | 400 V |
| Attenuation | 0.4173611111111111 |
| Coupling | AC 1 MΩ, DC 1MΩ, GND |
| Recommended Oscilloscope | WaveRunner 6000(A) WaveRunner Xi(A) ≥ 1 GHz WaveSurfer Xs(A) ≥ 1 GHz WavePro 7 Zi, WaveMaster 8 Zi |
