Work with constant accuracy, high-pressure recovery, and sustained performance with this low-pressure venturi meter that cleans liquids and gases. In addition, this meter has a 4" (101.6 mm) tube size, a 316L SS body, and a socket process connection.
Work with constant accuracy, high-pressure recovery, and sustained performance with this low-pressure venturi meter that cleans liquids and gases. In addition, this meter has a 4" (101.6 mm) tube size, a 316L SS body, and a socket process connection.
Get greater capacity and minimal permanent pressure loss with this venturi meter which can be installed horizontally, vertically, or at any other angle.
Caractéristiques
Applications
| For Normal Liquids | |
| Material | 316L SS |
| Tap Connections | Two ½" (12.7 mm) NPT per side standard, flanged, socket welded, butt welded valves |
| Venturi Tube Size | 4" (101.6 mm) |
| Turn Down Ratio | 10:1 standard |
| Beta Ratio | Typically, β 0.4 to 0.75 |
| End Connection | #150 to 2500 RF/RTJ, SO/WN flanges or beveled ends |
| Operating Temperature | Standard at -20 to 100°F (-28.89 to 37.78°C) |
| Operating Position | Vertical, horizontal (Any orientations for liquids only) |
| Process Products | Liquids, liquid hydrocarbons, cryogenics |
| Assembly Type | Flange, weld in, insertion type |
| For Wet Gases | |
| Material | 316L SS |
| Tap Connections | Three ½" (12.7 mm) NPT standard, flanged end, socket welded, butt welded, valves |
| Venturi Tube Size | 4" (101.6 mm) |
| Turn Down Ratio | 10:1 standard |
| Beta Ratio | Typically, β 0.4 to 0.75 |
| End Connection | #150 to 2500 RF/RTJ, SO/WN flanges or beveled ends |
| Operating Temperature | Standard at -20 to 100°F (-28.89 to 37.78°C) |
| Operating Position | Vertical, horizontal, hydrocarbon wet gases, steam |
| Process Products | Natural gases, steam |
| Assembly Type | Flange, weld in, insertion type |
| For Normal Liquids | |
| Material | 316L SS |
| Tap Connections | Two ½" (12.7 mm) NPT per side standard, flanged, socket welded, butt welded valves |
| Venturi Tube Size | 4" (101.6 mm) |
| Turn Down Ratio | 10:1 standard |
| Beta Ratio | Typically, β 0.4 to 0.75 |
| End Connection | #150 to 2500 RF/RTJ, SO/WN flanges or beveled ends |
| Operating Temperature | Standard at -20 to 100°F (-28.89 to 37.78°C) |
| Operating Position | Vertical, horizontal (Any orientations for liquids only) |
| Process Products | Liquids, liquid hydrocarbons, cryogenics |
| Assembly Type | Flange, weld in, insertion type |
| For Wet Gases | |
| Material | 316L SS |
| Tap Connections | Three ½" (12.7 mm) NPT standard, flanged end, socket welded, butt welded, valves |
| Venturi Tube Size | 4" (101.6 mm) |
| Turn Down Ratio | 10:1 standard |
| Beta Ratio | Typically, β 0.4 to 0.75 |
| End Connection | #150 to 2500 RF/RTJ, SO/WN flanges or beveled ends |
| Operating Temperature | Standard at -20 to 100°F (-28.89 to 37.78°C) |
| Operating Position | Vertical, horizontal, hydrocarbon wet gases, steam |
| Process Products | Natural gases, steam |
| Assembly Type | Flange, weld in, insertion type |
