Tasco CMT42DS offre

This branch circuit identifier completely maps all circuits and breaker connections from a single breaker panel. The Tasco CMT42DS Circuit Tracer Mapper is a unique and game-changing tester and wire tracer, which enables you to trace multiple circuits and their branches at the same time. The Tasco circuit mapper system greatly reduces man-hours spent when locating branch connections of electrical circuits. The Tasco CMT42DS maps a complete 42-circuit breaker panel common in most new residential or light office spaces. The Tasco CMT42DS circuit mapping tool comes with a case.

Caractéristiques

• Locates Up to 42 Branches Concurrently
• Determines Which Breakers Are Serving Specific Branches in Seconds
• Identifies Lines on Any Electrical Wiring System
• Designed for use on both energized and non-energized systems
• Features a non-contact setting and signals are read through wiring insulation, without direct electrical contact
• Eliminates Equipment Downtime Because Circuits Can be Tested With or Without Power
• Saves Valuable Time and Only Requires One Operator
• Microprocessor Based Digital Signal For Utmost Accuracy
• Provides a full digital LED readout
• Warranty - 2 Years
• Tasco CMT2R Receiver is a compatible add-on that can be used with any of the Circuit Mapper Systems allowing multiple people to trace receptacles improving circuit tracing efficiency.
• Tasco CMT33C current clamp for inductive coupling to a wire or cable.
• Easy to Use With No Knobs or Switches to Adjust
• Determines Which Breakers Are Serving Specific Branches in Seconds
• Identifies Lines on Any Electrical Wiring System
• Eliminates Equipment Downtime Because Circuits Can be Tested With or Without Power
• Saves Valuable Time and Only Requires One Operator
• Microprocessor Based Digital Signal For Utmost Accuracy
• Locates Up to 42 Branches Concurrently

Why is this product so revolutionary? Traditional wire and circuit testers let you trace one circuit at a time making work in a big buildings a very long task. The Tasco CMT42DS Circuit Mapper System comes with 42 clamps, and each of them has a different identification number. This means you can trace up to 42 circuits or identify up to 42 breakers in a panel all at the same time. Moreover, a probe of Tasco circuit mapper recognizes a digital signal without touching electrical conductor. Because the signal of of Tasco inc circuit mapper is digital, it does not cause any interference when you trace either electrical or LAN network cables. How does the CMT42DS work? Let's say you want to identify breakers in a panel and the circuits got to a two different floors. You clamp around wires in the breaker panel right next to breakers. You turn on the signal transmitter and then you or your fellow electrical technician walks around and inserts probe into outlets. The digital signal transmitted via a clamp is identified by the probe, and it actually shows, as a number on that probe. Thus, when you see number 3 on the probe, the same number corresponds to the clamp number 3 at the breaker panel. Isn't that easier than using traditional wire tracer to identify one circuit at a time and spending a lot of time walking around a building? The Tasco circuit tracer mapper comes in 3 different versions: CMT24DS, CMT42DS, and CMT84DS, with 24, 42 or 84 clamps respectively. You can chose a proper circuit mapper for the size of your job. For all electricians, this is probably the biggest invention since the bread slicer was created. This might be an exaggeration, but it really gives you an idea how great this product is, and how much time it will save you. All Tasco products are assembled in the USA to the highest standards of quality. Your satisfaction is guaranteed!

Applications

• Locates branch connections of electrical circuits
• Trace up to 42 circuits simultaneously
• Works on energized and de-energized lines