Doté de deux détecteurs de fuites à ultrasons, cet ensemble combine la précision d'un double capteur et la durabilité d'un boîtier étanche pour une détection fiable des fuites de gaz dans les environnements industriels et institutionnels. Un appareil est équipé de capteurs d'air ambiant et de contact avec des appareils de mesure numériques à DEL pour des tests précis et reproductibles, tandis que l'autre offre une protection étanche et robuste ainsi que la technologie DND (Dynamic Noise Discrimination) pour des performances supérieures dans les environnements bruyants. Idéal pour une large gamme de tâches de détection de fuites et de maintenance des installations.
Doté de deux détecteurs de fuites à ultrasons, cet ensemble combine la précision d'un double capteur et la durabilité d'un boîtier étanche pour une détection fiable des fuites de gaz dans les environnements industriels et institutionnels. Un appareil est équipé de capteurs d'air ambiant et de contact avec des appareils de mesure numériques à DEL pour des tests précis et reproductibles, tandis que l'autre offre une protection étanche et robuste ainsi que la technologie DND (Dynamic Noise Discrimination) pour des performances supérieures dans les environnements bruyants. Idéal pour une large gamme de tâches de détection de fuites et de maintenance des installations.
VPE-2000
The Superior AccuTrak® VPE-2000 is the first digitally controlled ultrasonic detector. Like two instruments in one, it uses two independent sensors supported by separate electronic circuits configured specifically to their own sensor. This assures optimum sound clarity and frequency response. When switching between the airborne and contact sensors, all settings are retained in memory! Digital LED meters let you establish baselines, perform trending, and accurately repeat these tests better than older, more expensive analog instruments.
Caractéristiques
VPX‑WR
The Superior AccuTrak® Model VPX-WR represents THE state-of-the-art technology for ultrasonic air leak detection! This ultra-durable and waterproof instrument incorporates our patented and trademarked circuitry we call 'DND' (Dynamic Noise Discrimination). Older detectors using only the heterodyne technique simply cannot offer the same leak detection abilities, especially in loud plant environments.
Sophisticated inside, simple outside!
Leaks come in all sizes, shapes, frequencies and intensities. You don't care what frequency a leak sound is, you just want to know where the leak is! Since the intensity of the leak sound is not directly proportional to the size of the leak, you can't use a meter to quantify CFM or volume of air lost, but you CAN find it! – THAT is what the VPX-WR does and does well… Finds leaks fast!
Ultra-durable construction, designed for harsh environments
AccuTrak® VPX-WR has the only sensor in the world that combines high sensitivity and hermeticity. Its resistance to water, steam, oils, fumes, dust, etc. allows the instrument to be used in hostile environments where other detectors fail. Totally sealed controls, indicators, and plugs make the unit 100% water tight. The internal circuitry is housed in hard anodized aluminum for durability and longevity. The aluminum housing is surrounded with a padded grip for comfort and easy handling. It is the most durable instrument of its kind.
Only unit with DND technology!
When it comes to loud environments, nothing finds air leaks faster and easier than the multi-patented AccuTrak® model VPX-WR with DND technology. DND (an acronym for Dynamic Noise Discrimination) is the first and only ultrasonic technology to analyze a broad spectrum of ultrasound, and select the proper frequency band of the leak sound AUTOMATICALLY!
Because they work like an AM radio, manually tuned heterodyne-only ultrasonic detectors can miss key sounds if not tuned properly. DND eliminates the guesswork associated with manual frequency tuning! It translates sounds from 20 to 100 kHz to the audible range regardless of the frequency of the original signal. Leaks come in all shapes and sizes, and therefore different frequencies are generated. You don't know what dominant frequency a given leak will produce, only DND solves the problem!
Applications
VPE-2000 | |
Airborne Sensor Sensitivity | -80 db/V-μbar |
Detection Performance* | 5 mil ID @ 5 PSI From 50' (15.24 m) |
Conditions | 60 db Ambient Sound Level - No In-band Sound |
Ultrasound Converter types | Digitally Controlled Heterodyne |
Frequency response | AirBorne High: 36 to 42 kHz Low: 26 to 34 kHz Touch Probe High: 36 to 42 kHz Low: 16 to 24 kHz Sonic: 0 to 10 kHz |
Heterodyne | Oscillator: Digital Filter: 4 kHz |
Controls | 4 Buttons |
Digital Control | Sensitivity and volume: 256 Steps |
Output | Audio: 0 to 4 kHz Visual: 20 Element Bar Graph with PEAK-Hold and Separate Alphanumeric Digital Display allowing simultaneous readings and comparisons |
Signal Output | Heterodyne |
ON Indicator | Digital Display |
Low Battery Indicator | Digital Display, BATT |
Insufficient Battery Charge | Automatic Shut-Down |
Battery | Type: 9 V Run time: 55 to 80 hours |
Shape | Parallelepiped |
Overall Length | 8.185" (20.78 cm) |
Body | Materials: Aluminum and ABS Finish: Anodized, Gold (MIL-A-8,625 Type3 Class2 ), Black ABS |
Connector | 3.5 mm Stereo |
Top Label | Velvet Lexan, Back Printed |
Dimensions | 7.075 x 2.4 x 0.875" (179 x 61 x 22.22 mm) |
Weight | 0.5 lbs (233 g) includes battery |
VPX‑WR | |
Sealed Sensor Sensitivity | -75 db/V-μbar |
Detection Performance* | 5 mil ID @ 5 PSI From 30' (9.1 m) |
Conditions | 60 db Ambient Sound Level - No In-band Sound |
Ultrasound Converter Types | AFT & Heterodyne |
Frequency | Response (AFT): 20 to 100 kHz |
Heterodyne | Frequency response: 34 to 42 kHz Oscillator: 38 kHz ± 50 Hz Filter: 4 kHz |
Sensitivity Control | Infinitely Variable |
Output | Audio, Headset |
Signal Output | Heterodyne |
ON Indicator | Red LED |
Low Battery Indicator | Flashes ON LED |
Insufficient Battery Charge | Automatic Shut-Down |
Battery Type | Ni-MH (Self Resetting Fuse) |
Run Time | 8 hours |
Charge Time | 16 hours |
Shape | Cylindrical |
Body | Materials: Aluminum Finish: Anodized, Hard Black (MIL-A-8,625 Type3 Class2 ) |
Connectors | Fully Sealed, keyed, Multipin LEMO |
Control Shaft Seal | Spring-Loaded Teflon |
Body Seals | O-Rings, front and rear |
Rear Label | Lexan |
Foam Grip | Rubber |
Dimensions | Body length: 9 -9 /16" (24.28 cm) Length: 10 to 1.4" (26.03 cm) Outside diameter with foam grip: 1 -15.16" (49.21 mm) |
Weight | 1 lbs (473 g) |
VPE-2000
VPX‑WR
VPE-2000 | |
Airborne Sensor Sensitivity | -80 db/V-μbar |
Detection Performance* | 5 mil ID @ 5 PSI From 50' (15.24 m) |
Conditions | 60 db Ambient Sound Level - No In-band Sound |
Ultrasound Converter types | Digitally Controlled Heterodyne |
Frequency response | AirBorne High: 36 to 42 kHz Low: 26 to 34 kHz Touch Probe High: 36 to 42 kHz Low: 16 to 24 kHz Sonic: 0 to 10 kHz |
Heterodyne | Oscillator: Digital Filter: 4 kHz |
Controls | 4 Buttons |
Digital Control | Sensitivity and volume: 256 Steps |
Output | Audio: 0 to 4 kHz Visual: 20 Element Bar Graph with PEAK-Hold and Separate Alphanumeric Digital Display allowing simultaneous readings and comparisons |
Signal Output | Heterodyne |
ON Indicator | Digital Display |
Low Battery Indicator | Digital Display, BATT |
Insufficient Battery Charge | Automatic Shut-Down |
Battery | Type: 9 V Run time: 55 to 80 hours |
Shape | Parallelepiped |
Overall Length | 8.185" (20.78 cm) |
Body | Materials: Aluminum and ABS Finish: Anodized, Gold (MIL-A-8,625 Type3 Class2 ), Black ABS |
Connector | 3.5 mm Stereo |
Top Label | Velvet Lexan, Back Printed |
Dimensions | 7.075 x 2.4 x 0.875" (179 x 61 x 22.22 mm) |
Weight | 0.5 lbs (233 g) includes battery |
VPX‑WR | |
Sealed Sensor Sensitivity | -75 db/V-μbar |
Detection Performance* | 5 mil ID @ 5 PSI From 30' (9.1 m) |
Conditions | 60 db Ambient Sound Level - No In-band Sound |
Ultrasound Converter Types | AFT & Heterodyne |
Frequency | Response (AFT): 20 to 100 kHz |
Heterodyne | Frequency response: 34 to 42 kHz Oscillator: 38 kHz ± 50 Hz Filter: 4 kHz |
Sensitivity Control | Infinitely Variable |
Output | Audio, Headset |
Signal Output | Heterodyne |
ON Indicator | Red LED |
Low Battery Indicator | Flashes ON LED |
Insufficient Battery Charge | Automatic Shut-Down |
Battery Type | Ni-MH (Self Resetting Fuse) |
Run Time | 8 hours |
Charge Time | 16 hours |
Shape | Cylindrical |
Body | Materials: Aluminum Finish: Anodized, Hard Black (MIL-A-8,625 Type3 Class2 ) |
Connectors | Fully Sealed, keyed, Multipin LEMO |
Control Shaft Seal | Spring-Loaded Teflon |
Body Seals | O-Rings, front and rear |
Rear Label | Lexan |
Foam Grip | Rubber |
Dimensions | Body length: 9 -9 /16" (24.28 cm) Length: 10 to 1.4" (26.03 cm) Outside diameter with foam grip: 1 -15.16" (49.21 mm) |
Weight | 1 lbs (473 g) |
VPE-2000
VPX‑WR