Fièrement québécois

Gestion et propriété 100% de chez nous

évaluation des clients

4.7/5 ÉTOILES

3932 COMMENTAIRES

évaluation des clients

4.7/5 ÉTOILES

3932 COMMENTAIRES

SHIMPO FGV-100XY Jauge de force numérique, 100lb

Modèle: FGV-100XY

SHIMPO FGV-100XY Jauge de force numérique, 100lb-

Télécharger: datasheet manual

Plus de produits SHIMPO

Demander à un expert

SHIMPO FGV-100XY Jauge de force numérique, 100lb

Modèle: FGV-100XY

Jauge de force numérique à l'affichage à demi tour 180¡ pour des applications de pousser/tirer réel. Taux d'échantillonnage interne 1000 Hz fournissant un échantillonnage plus rapide, une meilleure résolution et des résultats plus précis.

Jauge de force numérique à l'affichage à demi tour 180¡ pour des applications de pousser/tirer réel. Taux d'échantillonnage interne 1000 Hz fournissant un échantillonnage plus rapide, une meilleure résolution et des résultats plus précis.

Prix spécial $1210.83 CAD
Prix régulier $1309.00 CAD
Disponibilité 3 à 4 semaines
Quantité

Traceable Calibration Certificate Icon

Certificat d’étalonnage de traçabilité pour votre FGV-100XY Jauge de force numérique

Traceable Calibration Certificate Icon

Certificat d’étalonnage de traçabilité pour votre FGV-100XY Jauge de force numérique

Accessoires recommandées

SHIMPO FG-M6RD Steel Extension Rod, M6 Thread-

SHIMPO FG-M6RD Steel Extension Rod, M6 Thread

FG-M6RD

SHIMPO FGV-ANALOG Analog Output Cable for FGV Series-

SHIMPO FGV-ANALOG Analog Output Cable for FGV Series

FGV-ANALOG

SHIMPO CARRY-CASEFGV Carrying Case for FGE-XY and FGV-XY Digital Force Gauges-

SHIMPO CARRY-CASEFGV Carrying Case for FGE-XY and FGV-XY Digital Force Gauges

CARRY-CASEFGV

SHIMPO FG-M10FL Steel Flat Head Adapter, M10 Thread-

SHIMPO FG-M10FL Steel Flat Head Adapter, M10 Thread

FG-M10FL

SHIMPO FG-M10GV Steel Notched Head Adapter, M10 Thread-

SHIMPO FG-M10GV Steel Notched Head Adapter, M10 Thread

FG-M10GV

SHIMPO FG-M4ADP Standard Aluminum Adapter Set, M4 Thread-

SHIMPO FG-M4ADP Standard Aluminum Adapter Set, M4 Thread

FG-M4ADP

SHIMPO FGV-100XY offre

  • Idéal pour les tolérances strictes avec la précision ±0.2% p.é.
  • Capacité de mesurer et enregistrer les forces de traction et compression
  • Trois sorties différentes pour la collection des données: USB, RS-232 & analogiques
  • Statisitiques intégrées pour accès rapide à maximum, minimum moyenne et déviation standard
  • Mémoire augmenté pour emmagasiner des données et transférer sur un PC
  • Convertisseur Haut/Bas intégré pour des essais "go-no go" faciles
  • Préférences de l'utilisateur flexibles avec un bouton de sélection de jusqu'à 4 unités d'ingénierie
  • Affichage à demi tour 180° combiné avec la direction de force réglable et clavier à double sens activant la jauge pour exceller dans les deux applications de compression et de traction dans toutes les directions
  • Taux de mise à jour sélectif de l'affichage aide le visualisation des lectures
  • Étalonnage sur le terrain grâce au clavier éliminant les temps d'arrêt
  • Conçu pour plus de 1 million d'utilisations avec protection de surcharge exceptionnelle pour une vie prolongée, sans dommage
  • Construction robuste, ergonomque en aluminium moulé sous pression
  • Double alimentation: piles rechargeables ou ligne de tension c.a.

Spécifications pour le SHIMPO FGV-100XY

Capacité 100lb
50.00kg
500.0N
Résolution 0.1lb
0.01kg
0.1N
Précision ±0.2% de la pleine échelle
Capacité de surcharge 200% de la pleine échelle
Taux d'échantillonnage 1000 Hz
Affichage ACL 0.5" à 4 chiffres, (12 mm) haut. Réversible avec bouton-poussoir. Signe négatif pour la traction.
Mise à jour d'affichage 0.05, 0.1, 0.2, 0.3, 0.5, 1 sec
Sortie Analogique: ±1Vc.c. (avec un convertisseur 12 bit D/A)
RS232C: vitesse de transmission (sélection: 19200, 9600, 4800, 2400 bps), contrôle de commandes
USB: permet la communication entre l'unité & logiciel Windows a/ USB Toriemon via câble USB (inclut)
Comparateur surcharge Sortie collecteur ouvert (30Vc.c./5mA max)
Alimentation Pile rechargeable Ni-MH ou adaptateur/chargeur c.a.(100-240Vc.a., 50-60Hz)
Dimensions 5.8 x 3 x 1.5" (147 x 75 x 38 mm)
Poids 1 lb (450g)
Cliquer ici pour toutes les spécifications du SHIMPO FGV-100XY

SHIMPO FGV-100XY comprend

  • Jauge de force numérique
  • 8 pointes de mesure:
    • Crochet
    • Tête plate
    • Tête conique
    • Tête ciseau
    • Tête entaille
    • Cordon
    • Adaptateur en pouce
    • Tige d'extension
  • Adaptateur/chargeur c.a.
  • Câble USB
  • Étui de transport
datasheet pour le SHIMPO FGV-100XY Jauge de force numérique, 100lb manual pour le SHIMPO FGV-100XY Jauge de force numérique, 100lb

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le SHIMPO FGV-100XY Jauge de force numérique, 100lb.

SHIMPO FG-09V120UC Universal Adapter/Charger FG-09V120UC
120/240V AC Universal Adapter/Charger for TPN, TRC, FGE-XY, FGV-XY, FGE-HXY and FGV-HXY Series.



SHIMPO FG-M4PIN1 Aluminum Pin Head Grip, M4 Thread, 1mm FG-M4PIN1
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M4PIN2 Aluminum Pin Head Grip, M4 Thread, 2mm FG-M4PIN2
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M4PIN05 Aluminum Pin Head Grip, M4 Thread, 0.5mm FG-M4PIN05
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M4FLM20 Aluminum Wide Film Grip, M4 Thread FG-M4FLM20
20mm Grip for use with FGE and FGV Series Force Gauges.



SHIMPO FG-M4FPG3 Aluminum Fine Point Grip, M4 Thread, 3mm FG-M4FPG3
3mm Grip for use with FGE and FGV Series Force Gauges.



SHIMPO FG-M4FPG8 Aluminum Fine Point Grip, M4 Thread, 8mm FG-M4FPG8
8mm Grip for use with FGE and FGV Series Force Gauges.



SHIMPO FG-M4RD Aluminum Extension Rod, M4 Thread FG-M4RD
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M6RD Steel Extension Rod, M6 Thread FG-M6RD
The SHIMPO extension rod is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that extends the reach of the sensor and its attachments. It fits onto the sensor of the force gauge.



SHIMPO FG-M6RD-5IN Steel Extension Rod, 5in, M6 Thread FG-M6RD-5IN
The SHIMPO extension rod is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that extends the reach of the sensor and its attachments. It fits onto the sensor of the force gauge.



SHIMPO FG-M6ADP Standard Steel Adapter Set, M6 FG-M6ADP
Set Features a Chisel, Cone, Flat Head, Notched, Hook and Extension Rod. For use with FGE and FGV Series Force Gauges.



SHIMPO FG-M6CL Steel Chisel Adapter, M6 Thread FG-M6CL
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M6 thread and a 110 lb. (50 kg) capacity. It is made of stainless steel for good resistance to wear and corrosion.



SHIMPO FG-M6CN Steel Cone Head Adapter, M6 Thread FG-M6CN
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M6 thread and a 110 lb. (50 kg) capacity. It is made of stainless steel for good resistance to wear and corrosion.



SHIMPO FG-M6FL Steel Flat Head Adapter, M6 Thread FG-M6FL
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M6 thread and a 110 lb. (50 kg) capacity. It is made of stainless steel for good resistance to wear and corrosion.



SHIMPO FG-M6GV Steel Notched Head Adapter, M6 Thread FG-M6GV
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M6 thread and a 110 lb. (50 kg) capacity. It is made of stainless steel for good resistance to wear and corrosion.



SHIMPO FG-M6TJ10 Thread Adapter, M6 to 10/32 UNF FG-M6TJ10
The SHIMPO thread adapter is an accessory for SHIMPO force gauge test stands and force gauges. It fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, allowing a variety of accessories and parts to be attached and swapped.



SHIMPO FG-M6TM10 Thread Adapter, M6 (FEM) to M10 (MALE) FG-M6TM10
The SHIMPO thread adapter is an accessory for SHIMPO force gauge test stands and force gauges. It fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, allowing a variety of accessories and parts to be attached and swapped.



SHIMPO FG-10TJM6 Thread Adapter, 10/32 UNF to M6 FG-10TJM6
For use with SHIMPO force gauges and force gauge test stands. Fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, which allows for a variety of accessories and parts to be attached and swapped.



SHIMPO FG-M4ADP Standard Aluminum Adapter Set, M4 Thread FG-M4ADP
The SHIMPO adapter set for force gauges is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that comes with one hook, one extension rod, and four heads (one flat, one chisel, one pointed, and one notched) for testing on a variety of samples. The attachments fits onto the sensor of the force gauge.



SHIMPO FG-M4CL Aluminum Chisel Adapter, M4 Thread FG-M4CL
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M4 thread, and it is made of stainless steel, which resists corrosion and wear.



SHIMPO FG-M4CN Aluminum Cone Head Adapter, M4 Thread FG-M4CN
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M4 thread, and it is made of stainless steel, which resists corrosion and wear.



SHIMPO FG-M4FL Aluminum Flat Head Adapter, M4 Thread FG-M4FL
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M4 thread, and it is made of stainless steel, which resists corrosion and wear.



SHIMPO FG-M6HK Steel Hook Adapter, M6 Thread FG-M6HK
The SHIMPO force gauge hook is an accessory for SHIMPO force gauges that is used in tensile testing. It attaches to a force gauge to allow a load to be hooked onto the gauge.



SHIMPO FG-M6HKL Steel Large Hook Adapter, M6 Thread FG-M6HKL
The SHIMPO force gauge hook is an accessory for SHIMPO force gauges that is used in tensile testing. It attaches to a force gauge to allow a load to be hooked onto the gauge.



SHIMPO FG-M4HK Aluminum Hook Adapter, M4 Thread FG-M4HK
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M10HK Steel Hook Adapter, M10 Thread FG-M10HK
For use with SHIMPO FGE and FGV Series 500lb units Force Gauges.



SHIMPO FG-M6PUNCTURE-ST Puncture Test Attachment, M6 Thread FG-M6PUNCTURE-ST
The SHIMPO FG-M6Puncture-ST is an accessory for the SHIMPO FGE and FGV Dart series force gauges that measures the puncture resistance of products such as gypsum wall board, foam, cardboard, fruit and vegetables, cork, plastic tubing, and membranes. It is threaded to fit onto the sensor of a compatible force gauge, and it measures 1.375" (34.91 mm) long.



SHIMPO FG-M4GV Aluminum Notched Head Adapter, M4 Thread FG-M4GV
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M10GV Steel Notched Head Adapter, M10 Thread FG-M10GV
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO CABLE-USB Communication Cable for FGV-XY Series CABLE-USB



SHIMPO FGV-ANALOG Analog Output Cable for FGV Series FGV-ANALOG
Connects a compatible force gauge to the length port of a force gauge test stand, and converts length measurement to an analog voltage signal for recording purposes. The ratio of analog output to length measurement is 10 mV for every 1 mm, and the signal amplitude of output voltage is ±1 VDC.



SHIMPO FGV-RS232 RS-232 Output Cable for FGV Series FGV-RS232



SHIMPO FGV-FGS250P Interface Cable for FGS-100 and FGS-250 Motorized Test Stands FGV-FGS250P
Test stand interface cable allows communication between FGV-X and the FGS-250PV flex stand.



SHIMPO CARRY-CASEFGV Carrying Case for FGE-XY and FGV-XY Digital Force Gauges CARRY-CASEFGV



SHIMPO FG-HANDLE Handle for FGE-XY and FGV-XY Digital Force Gauges FG-HANDLE
Handle adapter for larger loads.



SHIMPO FG-M10FL Steel Flat Head Adapter, M10 Thread FG-M10FL
For use with SHIMPO FGE and FGV Series Force Gauges.



Poser une question sur le SHIMPO FGV-100XY Jauge de force numérique, 100lb

SHIMPO FGV-100XY offre

  • Idéal pour les tolérances strictes avec la précision ±0.2% p.é.
  • Capacité de mesurer et enregistrer les forces de traction et compression
  • Trois sorties différentes pour la collection des données: USB, RS-232 & analogiques
  • Statisitiques intégrées pour accès rapide à maximum, minimum moyenne et déviation standard
  • Mémoire augmenté pour emmagasiner des données et transférer sur un PC
  • Convertisseur Haut/Bas intégré pour des essais "go-no go" faciles
  • Préférences de l'utilisateur flexibles avec un bouton de sélection de jusqu'à 4 unités d'ingénierie
  • Affichage à demi tour 180° combiné avec la direction de force réglable et clavier à double sens activant la jauge pour exceller dans les deux applications de compression et de traction dans toutes les directions
  • Taux de mise à jour sélectif de l'affichage aide le visualisation des lectures
  • Étalonnage sur le terrain grâce au clavier éliminant les temps d'arrêt
  • Conçu pour plus de 1 million d'utilisations avec protection de surcharge exceptionnelle pour une vie prolongée, sans dommage
  • Construction robuste, ergonomque en aluminium moulé sous pression
  • Double alimentation: piles rechargeables ou ligne de tension c.a.
En savoir plus...

Spécifications pour le SHIMPO FGV-100XY

Capacité 100lb
50.00kg
500.0N
Résolution 0.1lb
0.01kg
0.1N
Précision ±0.2% de la pleine échelle
Capacité de surcharge 200% de la pleine échelle
Taux d'échantillonnage 1000 Hz
Affichage ACL 0.5" à 4 chiffres, (12 mm) haut. Réversible avec bouton-poussoir. Signe négatif pour la traction.
Mise à jour d'affichage 0.05, 0.1, 0.2, 0.3, 0.5, 1 sec
Sortie Analogique: ±1Vc.c. (avec un convertisseur 12 bit D/A)
RS232C: vitesse de transmission (sélection: 19200, 9600, 4800, 2400 bps), contrôle de commandes
USB: permet la communication entre l'unité & logiciel Windows a/ USB Toriemon via câble USB (inclut)
Comparateur surcharge Sortie collecteur ouvert (30Vc.c./5mA max)
Alimentation Pile rechargeable Ni-MH ou adaptateur/chargeur c.a.(100-240Vc.a., 50-60Hz)
Dimensions 5.8 x 3 x 1.5" (147 x 75 x 38 mm)
Poids 1 lb (450g)
Cliquer ici pour toutes les spécifications du SHIMPO FGV-100XY

SHIMPO FGV-100XY comprend

  • Jauge de force numérique
  • 8 pointes de mesure:
    • Crochet
    • Tête plate
    • Tête conique
    • Tête ciseau
    • Tête entaille
    • Cordon
    • Adaptateur en pouce
    • Tige d'extension
  • Adaptateur/chargeur c.a.
  • Câble USB
  • Étui de transport
datasheet pour le SHIMPO FGV-100XY Jauge de force numérique, 100lb manual pour le SHIMPO FGV-100XY Jauge de force numérique, 100lb

Cliquer sur une catégorie pour voir une sélection d'accessoires compatible avec le SHIMPO FGV-100XY Jauge de force numérique, 100lb.

SHIMPO FG-09V120UC Universal Adapter/Charger FG-09V120UC
120/240V AC Universal Adapter/Charger for TPN, TRC, FGE-XY, FGV-XY, FGE-HXY and FGV-HXY Series.



SHIMPO FG-M4PIN1 Aluminum Pin Head Grip, M4 Thread, 1mm FG-M4PIN1
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M4PIN2 Aluminum Pin Head Grip, M4 Thread, 2mm FG-M4PIN2
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M4PIN05 Aluminum Pin Head Grip, M4 Thread, 0.5mm FG-M4PIN05
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M4FLM20 Aluminum Wide Film Grip, M4 Thread FG-M4FLM20
20mm Grip for use with FGE and FGV Series Force Gauges.



SHIMPO FG-M4FPG3 Aluminum Fine Point Grip, M4 Thread, 3mm FG-M4FPG3
3mm Grip for use with FGE and FGV Series Force Gauges.



SHIMPO FG-M4FPG8 Aluminum Fine Point Grip, M4 Thread, 8mm FG-M4FPG8
8mm Grip for use with FGE and FGV Series Force Gauges.



SHIMPO FG-M4RD Aluminum Extension Rod, M4 Thread FG-M4RD
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M6RD Steel Extension Rod, M6 Thread FG-M6RD
The SHIMPO extension rod is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that extends the reach of the sensor and its attachments. It fits onto the sensor of the force gauge.



SHIMPO FG-M6RD-5IN Steel Extension Rod, 5in, M6 Thread FG-M6RD-5IN
The SHIMPO extension rod is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that extends the reach of the sensor and its attachments. It fits onto the sensor of the force gauge.



SHIMPO FG-M6ADP Standard Steel Adapter Set, M6 FG-M6ADP
Set Features a Chisel, Cone, Flat Head, Notched, Hook and Extension Rod. For use with FGE and FGV Series Force Gauges.



SHIMPO FG-M6CL Steel Chisel Adapter, M6 Thread FG-M6CL
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M6 thread and a 110 lb. (50 kg) capacity. It is made of stainless steel for good resistance to wear and corrosion.



SHIMPO FG-M6CN Steel Cone Head Adapter, M6 Thread FG-M6CN
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M6 thread and a 110 lb. (50 kg) capacity. It is made of stainless steel for good resistance to wear and corrosion.



SHIMPO FG-M6FL Steel Flat Head Adapter, M6 Thread FG-M6FL
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M6 thread and a 110 lb. (50 kg) capacity. It is made of stainless steel for good resistance to wear and corrosion.



SHIMPO FG-M6GV Steel Notched Head Adapter, M6 Thread FG-M6GV
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M6 thread and a 110 lb. (50 kg) capacity. It is made of stainless steel for good resistance to wear and corrosion.



SHIMPO FG-M6TJ10 Thread Adapter, M6 to 10/32 UNF FG-M6TJ10
The SHIMPO thread adapter is an accessory for SHIMPO force gauge test stands and force gauges. It fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, allowing a variety of accessories and parts to be attached and swapped.



SHIMPO FG-M6TM10 Thread Adapter, M6 (FEM) to M10 (MALE) FG-M6TM10
The SHIMPO thread adapter is an accessory for SHIMPO force gauge test stands and force gauges. It fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, allowing a variety of accessories and parts to be attached and swapped.



SHIMPO FG-10TJM6 Thread Adapter, 10/32 UNF to M6 FG-10TJM6
For use with SHIMPO force gauges and force gauge test stands. Fits onto a part or accessory to adapt one thread size to another and to convert it from male to female or female to male, which allows for a variety of accessories and parts to be attached and swapped.



SHIMPO FG-M4ADP Standard Aluminum Adapter Set, M4 Thread FG-M4ADP
The SHIMPO adapter set for force gauges is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that comes with one hook, one extension rod, and four heads (one flat, one chisel, one pointed, and one notched) for testing on a variety of samples. The attachments fits onto the sensor of the force gauge.



SHIMPO FG-M4CL Aluminum Chisel Adapter, M4 Thread FG-M4CL
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M4 thread, and it is made of stainless steel, which resists corrosion and wear.



SHIMPO FG-M4CN Aluminum Cone Head Adapter, M4 Thread FG-M4CN
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M4 thread, and it is made of stainless steel, which resists corrosion and wear.



SHIMPO FG-M4FL Aluminum Flat Head Adapter, M4 Thread FG-M4FL
The SHIMPO steel head adapter is an accessory for SHIMPO FGE-X, FGV-X, and FGV-XY force gauges that fits onto the sensor of the gauge. The attachment has an M4 thread, and it is made of stainless steel, which resists corrosion and wear.



SHIMPO FG-M6HK Steel Hook Adapter, M6 Thread FG-M6HK
The SHIMPO force gauge hook is an accessory for SHIMPO force gauges that is used in tensile testing. It attaches to a force gauge to allow a load to be hooked onto the gauge.



SHIMPO FG-M6HKL Steel Large Hook Adapter, M6 Thread FG-M6HKL
The SHIMPO force gauge hook is an accessory for SHIMPO force gauges that is used in tensile testing. It attaches to a force gauge to allow a load to be hooked onto the gauge.



SHIMPO FG-M4HK Aluminum Hook Adapter, M4 Thread FG-M4HK
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M10HK Steel Hook Adapter, M10 Thread FG-M10HK
For use with SHIMPO FGE and FGV Series 500lb units Force Gauges.



SHIMPO FG-M6PUNCTURE-ST Puncture Test Attachment, M6 Thread FG-M6PUNCTURE-ST
The SHIMPO FG-M6Puncture-ST is an accessory for the SHIMPO FGE and FGV Dart series force gauges that measures the puncture resistance of products such as gypsum wall board, foam, cardboard, fruit and vegetables, cork, plastic tubing, and membranes. It is threaded to fit onto the sensor of a compatible force gauge, and it measures 1.375" (34.91 mm) long.



SHIMPO FG-M4GV Aluminum Notched Head Adapter, M4 Thread FG-M4GV
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO FG-M10GV Steel Notched Head Adapter, M10 Thread FG-M10GV
For use with SHIMPO FGE and FGV Series Force Gauges.



SHIMPO CABLE-USB Communication Cable for FGV-XY Series CABLE-USB



SHIMPO FGV-ANALOG Analog Output Cable for FGV Series FGV-ANALOG
Connects a compatible force gauge to the length port of a force gauge test stand, and converts length measurement to an analog voltage signal for recording purposes. The ratio of analog output to length measurement is 10 mV for every 1 mm, and the signal amplitude of output voltage is ±1 VDC.



SHIMPO FGV-RS232 RS-232 Output Cable for FGV Series FGV-RS232



SHIMPO FGV-FGS250P Interface Cable for FGS-100 and FGS-250 Motorized Test Stands FGV-FGS250P
Test stand interface cable allows communication between FGV-X and the FGS-250PV flex stand.



SHIMPO CARRY-CASEFGV Carrying Case for FGE-XY and FGV-XY Digital Force Gauges CARRY-CASEFGV



SHIMPO FG-HANDLE Handle for FGE-XY and FGV-XY Digital Force Gauges FG-HANDLE
Handle adapter for larger loads.



SHIMPO FG-M10FL Steel Flat Head Adapter, M10 Thread FG-M10FL
For use with SHIMPO FGE and FGV Series Force Gauges.



Poser une question sur le SHIMPO FGV-100XY Jauge de force numérique, 100lb

Plus de produits SHIMPO



  • Nous acceptons ces méthodes de paiement:
  • Visa, Master Card, Discover, American Express & PayPal
  • Nous acceptons également les virements électroniques / TEF, les chèques et les bons de commande avec approbation de crédit. Les méthodes de paiement acceptées varient selon les pays.