SCS CTC061-3-243-WW offre

This applies an ultra-low test voltage to the operator (0.05V) for the handling of sensitive components.

Caractéristiques

• Dual Workstation Continuous Monitor: Continuously monitors the path-to-ground integrity of 2 operators, 2 conductive or dissipative worksurfaces, and 2 metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
• Digital Signal Processing Technology
• Operator Body Voltage Detection: Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD-susceptible item
• EMI Monitoring on Metal Grounds: Alarms if the grounded metal tools have high-frequency noise that could cause electrical overstress (EOS) damage
• System Includes Monitor and 2 Remote Terminals: Monitor can be installed at eye level, and remote terminals can be mounted at desired locations up to 10ft (3.05m) away. Each remote terminal includes a monitored jack for operators and an unmonitored jack for visitors
• Relay Terminal: Outputs 0/20mA logic level for relay input
• Use with Dual-Wire Wrist Straps
• Replaceable Dual-Wire Operator Jack: Use the CTA245 Replacement Jack PCB to easily replace the operator jack without the use of solder
• Calibration Unit Available for Accurate Performance and Conformity Testing in the Field
• NIST Calibrated with Certificate Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology
• 100 to 240VAC Power Adapter with Interchangeable Plugs: Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe
• Assembled in the United States of America with Globally Sourced Materials: This item is assembled and stocked in Chino, CA