SCS 770065 Verification Tester for 724 and 725 Monitors

Modèle: 770065

SCS 770065 Verification Tester for 724 and 725 Monitors

Modèle: 770065

This verification tester checks the operator test limits of the SCS workstation monitor and the test limits of the portable wrist strap monitor without removing them from their workstations.

This verification tester checks the operator test limits of the SCS workstation monitor and the test limits of the portable wrist strap monitor without removing them from their workstations.

Prix spécial $191.09 CAD
Prix régulier $197.00 CAD
Disponibilité 4 à 5 semaines
Quantité

Traceable Calibration Certificate Icon

Certificat d’étalonnage de traçabilité pour votre 770065 Verification Tester for 724 and 725 Monitors

Traceable Calibration Certificate Icon

Certificat d’étalonnage de traçabilité pour votre 770065 Verification Tester for 724 and 725 Monitors

SCS 770065 offre

This verification tester is has ground clip contacts and toggle switch that verifies the ground circuit in the 725 portable wrists strap monitor.

Caractéristiques

  • NIST Calibrated with Certificate Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology
  • Made in the United States of America

Spécifications pour le SCS 770065

Operating Temperature 50 to 95°F (10 to 35°C)
Environmental Requirements Indoor use only at altitudes less than 6500 ft. (2 km), Maximum relative humidity of 80% up to 85°F (30°C) decreasing linearly to 50% @ 85°F (30°C)
Dimensions 3.8 x 2.4 x .9" (97 x 61 x 23 mm)
Weight 0.2 lbs. (0.1 kg)
Country of Origin United States of America

Le SCS 770065 comprend

  • Verification Tester
  • Certificate of Calibration

Poser une question sur le SCS 770065 Verification Tester for 724 and 725 Monitors

SCS 770065 offre

This verification tester is has ground clip contacts and toggle switch that verifies the ground circuit in the 725 portable wrists strap monitor.

Caractéristiques

  • NIST Calibrated with Certificate Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology
  • Made in the United States of America

Spécifications pour le SCS 770065

Operating Temperature 50 to 95°F (10 to 35°C)
Environmental Requirements Indoor use only at altitudes less than 6500 ft. (2 km), Maximum relative humidity of 80% up to 85°F (30°C) decreasing linearly to 50% @ 85°F (30°C)
Dimensions 3.8 x 2.4 x .9" (97 x 61 x 23 mm)
Weight 0.2 lbs. (0.1 kg)
Country of Origin United States of America

Le SCS 770065 comprend

  • Verification Tester
  • Certificate of Calibration

Poser une question sur le SCS 770065 Verification Tester for 724 and 725 Monitors

Plus de produits SCS