Lightweight and protective, the cushioned static shield bag is essential for preventing product damage, and can be used throughout an ESD Protected Area. The shield is free of amines, N-octanoic acid, silicones, and heavy metals.
Lightweight and protective, the cushioned static shield bag is essential for preventing product damage, and can be used throughout an ESD Protected Area. The shield is free of amines, N-octanoic acid, silicones, and heavy metals.
Caractéristiques
Applications
| Electrical Properties | |
| Surface Resistance - Exterior | Typical values: 1 x 104 to < 1 x 1011 ohms<br> Test method: ANSI/ESD STM11.11 |
| Surface Resistance - Interior | Typical values: 1 x 104 to < 1 x 1011 ohms<br> Test method: ANSI/ESD STM11.11 |
| Discharge Shielding | Typical values: <10 nJ<br> Test method: ANSI/ESD STM11.31, EIA 541 |
| Physical Properties | |
| Material | Typical value: Nominal 0.150" (3.8mm) ±10% Testing method: MIL-STD-3010, 1003 |
| Seal Strength | Typical value: >7 lbs/in (>3 kg/cm) Testing method: 375°F, 1/2 sec 60 psi |
| Puncture Resistance | Typical value: >20 lbs (9 kg) Testing method: MIL-STD-3010, 2065 |
| Cleanliness | |
| Silicone | Typical value: Not detected Testing method: ASTM E 168 |
| Electrical Properties | |
| Surface Resistance - Exterior | Typical values: 1 x 104 to < 1 x 1011 ohms<br> Test method: ANSI/ESD STM11.11 |
| Surface Resistance - Interior | Typical values: 1 x 104 to < 1 x 1011 ohms<br> Test method: ANSI/ESD STM11.11 |
| Discharge Shielding | Typical values: <10 nJ<br> Test method: ANSI/ESD STM11.31, EIA 541 |
| Physical Properties | |
| Material | Typical value: Nominal 0.150" (3.8mm) ±10% Testing method: MIL-STD-3010, 1003 |
| Seal Strength | Typical value: >7 lbs/in (>3 kg/cm) Testing method: 375°F, 1/2 sec 60 psi |
| Puncture Resistance | Typical value: >20 lbs (9 kg) Testing method: MIL-STD-3010, 2065 |
| Cleanliness | |
| Silicone | Typical value: Not detected Testing method: ASTM E 168 |
