This electronic actuator drive provides precise proportional control of electric gear train actuators using a 4 to 20 mADC input signal from a controller. Ideal for reliable and accurate positioning in automation systems.
This electronic actuator drive provides precise proportional control of electric gear train actuators using a 4 to 20 mADC input signal from a controller. Ideal for reliable and accurate positioning in automation systems.
Discontinué!
Ce produit a été discontinué et n’est plus disponible. Il n’y a pas de produit de remplacement direct. Ne vous inquiétez pas, nous avons quelques options pour vous aider à trouver ce dont vous avez besoin:
Visitez notre catégorie Flow Controllers pour trouver des produits similaires.
Ou nous ferons une recherche et vous aiderons à trouver ce dont vous avez besoin:
| Input Signal | Range: Factory set at 4 to 20 mADC, field adjustable to accept ranges such as 2 through 7, 2 through 12, 7 through 12, 4 through 12, 12 through 20 mADC Span: Factory set at 16 mADC, field adjustable 4 to 16 mADC Start Point: Factory set at 4 mADC, field adjustable from 2 to 16 mADC Impedance: 250 Ω for constant current output controls Grounding: Either or both input wires grounded will not cause damage Maximum: 40 mADC Isolation: Optically |
| Hysteresis | Factory set for 3 to 5% of 16 mA span |
| Linerity | 0.15% of actuator rotation |
| Power Requirements | 120 or 240 VAC, +10%, with fixed input signal offset of +1% maximum. 24 VAC units not available |
| Power Consumption | 3.5 VA at 120 or 240 VAC, 50 or 60 Hz |
| Ambient Temperature Limits | -13 to 140°F (-25 to 60°C) |
| Case | Aluminum |
| Mounting | Directly to actuator. Upright position preferred, but other positions are acceptable |
| Connections | Color coded pigtail leads |
| Dimensions | 4-5/8 x 4-1/16 x 2-1/2" (117 x 103 x 63 mm) |
