Compact and light, this portable single-gas detector protects from exposure to CO with an electrochemical sensor and can be clipped into your breathing zone or on your safety equipment with its alligator clip. In addition, this monitor features a battery that provides up to 4000 hours of continuous operation.
Compact and light, this portable single-gas detector protects from exposure to CO with an electrochemical sensor and can be clipped into your breathing zone or on your safety equipment with its alligator clip. In addition, this monitor features a battery that provides up to 4000 hours of continuous operation.
Caractéristiques
Applications
| Model | Carbon monoxide |
| Detection Principle | EC |
| Detection Range (Increments) | 0 to 300 ppm (1) |
| Service Range | 310 to 2000 ppm (10) |
| Alarm Setpoints | 1st: 25 ppm 2nd: 50 ppm 3rd: 1200 ppm TWA: 25 ppm STEL: 200 ppm OVER: 2000 ppm |
| Operating Temperature | -4 to 122°F (-20 to 50°C), no sudden changes Approximately 15-minute temporary use environment: -4 to 140°F (-20 to 60°C) [no sudden changes] |
| Humidity Range | 10 to 90 % RH (no condensation) Approximately 15-minute temporary use environment: 0 to 95 % RH [no condensation] |
| Continuous Operating Time | Approximately 4000 hours |
| Sampling Method | Diffusion type |
| Types of Alarm | Gas alarms: Three-step alarms, STEL alarm, TWA alarm, OVER alarm Fault alarms: Sensor connection/disconnection, low battery level, calibration failure, clock abnormality, system abnormality |
| Alarm Indications | Auto-reset or self latching Lamp flashing, intermittent buzzer sounding, gas concentration readout blinking, vibration |
| Approvals | ATEX, IECEx, CSA |
| Functions | Data logger, vibration, STEL alarm, TWA alarm, quick calibration, peak value display, temperature display |
| Case Material | Intrisically safe explosion-proof construction (Ex ia IIC T4 Ga) , IP 66/68 (6.6', 1 h) (2 m, 1 h) |
| Power | CR2450 coin-type lithium ion battery |
| Dimensions | 2.5 x 1.6 x 0.86" (63 x 42 x 22 mm) |
| Weight | 1.6 oz (45 g) |
| Model | Carbon monoxide |
| Detection Principle | EC |
| Detection Range (Increments) | 0 to 300 ppm (1) |
| Service Range | 310 to 2000 ppm (10) |
| Alarm Setpoints | 1st: 25 ppm 2nd: 50 ppm 3rd: 1200 ppm TWA: 25 ppm STEL: 200 ppm OVER: 2000 ppm |
| Operating Temperature | -4 to 122°F (-20 to 50°C), no sudden changes Approximately 15-minute temporary use environment: -4 to 140°F (-20 to 60°C) [no sudden changes] |
| Humidity Range | 10 to 90 % RH (no condensation) Approximately 15-minute temporary use environment: 0 to 95 % RH [no condensation] |
| Continuous Operating Time | Approximately 4000 hours |
| Sampling Method | Diffusion type |
| Types of Alarm | Gas alarms: Three-step alarms, STEL alarm, TWA alarm, OVER alarm Fault alarms: Sensor connection/disconnection, low battery level, calibration failure, clock abnormality, system abnormality |
| Alarm Indications | Auto-reset or self latching Lamp flashing, intermittent buzzer sounding, gas concentration readout blinking, vibration |
| Approvals | ATEX, IECEx, CSA |
| Functions | Data logger, vibration, STEL alarm, TWA alarm, quick calibration, peak value display, temperature display |
| Case Material | Intrisically safe explosion-proof construction (Ex ia IIC T4 Ga) , IP 66/68 (6.6', 1 h) (2 m, 1 h) |
| Power | CR2450 coin-type lithium ion battery |
| Dimensions | 2.5 x 1.6 x 0.86" (63 x 42 x 22 mm) |
| Weight | 1.6 oz (45 g) |
