Compact and light, this portable single-gas detector protects from exposure to hydrogen sulfide and can be worn on your wrist as a watch. In addition, this monitor features a field-replaceable, coin-type lithium-ion battery which provides up to 4000 hours of continuous operation.
Compact and light, this portable single-gas detector protects from exposure to hydrogen sulfide and can be worn on your wrist as a watch. In addition, this monitor features a field-replaceable, coin-type lithium-ion battery which provides up to 4000 hours of continuous operation.
Caractéristiques
Applications
| Model | Hydrogen sulfide |
| Detection Principle | EC |
| Detection Range (Increments) | 0 to 30 ppm (0.1) 30 to 100 ppm (1) |
| Service Range | 100 to 200 ppm (1) |
| Alarm Setpoints | 1st: 5 ppm 2nd: 30 ppm 3rd: 100 ppm TWA: 1 ppm STEL: 5 ppm OVER: 200 ppm |
| Operating Temperature | -4 to 122°F (-20 to 50°C), no sudden changes Approximately 15-minute temporary use environment: -4 to 140°F (-20 to 60°C) [no sudden changes] |
| Humidity Range | 10 to 90 % RH (no condensation) Approximately 15-minute temporary use environment: 0 to 95 % RH [no condensation] |
| Continuous Operating Time | Approximately 4000 hours |
| Sampling Method | Diffusion type |
| Types of Alarm | Gas alarms: Three-step alarms, STEL alarm, TWA alarm, OVER alarm Fault alarms: Sensor connection/disconnection, low battery level, calibration failure, clock abnormality, system abnormality |
| Alarm Indications | Auto-reset or self latching Lamp flashing, intermittent buzzer sounding, gas concentration readout blinking, vibration |
| Approvals | ATEX, IECEx, CSA |
| Functions | Data logger, vibration, STEL alarm, TWA alarm, quick calibration, peak value display, temperature display |
| Case Material | Intrisically safe explosion-proof construction (Ex ia IIC T4 Ga) , IP 66/68 [6.6', 1 h (2 m, 1 h)] |
| Power | CR2450 coin-type lithium ion battery |
| Dimensions | 2.5 x 1.6 x 0.86" (63 x 42 x 22 mm) |
| Weight | 1.6 oz (45 g) |
| Model | Hydrogen sulfide |
| Detection Principle | EC |
| Detection Range (Increments) | 0 to 30 ppm (0.1) 30 to 100 ppm (1) |
| Service Range | 100 to 200 ppm (1) |
| Alarm Setpoints | 1st: 5 ppm 2nd: 30 ppm 3rd: 100 ppm TWA: 1 ppm STEL: 5 ppm OVER: 200 ppm |
| Operating Temperature | -4 to 122°F (-20 to 50°C), no sudden changes Approximately 15-minute temporary use environment: -4 to 140°F (-20 to 60°C) [no sudden changes] |
| Humidity Range | 10 to 90 % RH (no condensation) Approximately 15-minute temporary use environment: 0 to 95 % RH [no condensation] |
| Continuous Operating Time | Approximately 4000 hours |
| Sampling Method | Diffusion type |
| Types of Alarm | Gas alarms: Three-step alarms, STEL alarm, TWA alarm, OVER alarm Fault alarms: Sensor connection/disconnection, low battery level, calibration failure, clock abnormality, system abnormality |
| Alarm Indications | Auto-reset or self latching Lamp flashing, intermittent buzzer sounding, gas concentration readout blinking, vibration |
| Approvals | ATEX, IECEx, CSA |
| Functions | Data logger, vibration, STEL alarm, TWA alarm, quick calibration, peak value display, temperature display |
| Case Material | Intrisically safe explosion-proof construction (Ex ia IIC T4 Ga) , IP 66/68 [6.6', 1 h (2 m, 1 h)] |
| Power | CR2450 coin-type lithium ion battery |
| Dimensions | 2.5 x 1.6 x 0.86" (63 x 42 x 22 mm) |
| Weight | 1.6 oz (45 g) |
.svg)
