Portable and versatile, this multi-gas detector for confined spaces detects LEL/O2/H2S/CO and comes with an alkaline battery pack. In addition, it features high-quality micro-sensor technology and three operating modes: Normal for safety monitoring, Leak check for leak investigations and Bar Hole for underground leak checks.
Portable and versatile, this multi-gas detector for confined spaces detects LEL/O2/H2S/CO and comes with an alkaline battery pack. In addition, it features high-quality micro-sensor technology and three operating modes: Normal for safety monitoring, Leak check for leak investigations and Bar Hole for underground leak checks.
Discontinué!
Ce produit a été discontinué et n’est plus disponible.
Voici le produit de remplacement direct :
With a high-impact, dust and water resistant design, this confined space gas monitor is ideal for line purge testing.
Features
Applications
| Detection Principle | Combustible gases (methane as standard): Catalytic combustion % Volume methane: Thermal conductivity Oxygen (O2): Galvanic cell Hydrogen sulfide (H2S): Electrochemical cell Carbon monoxide (CO): Electrochemical cell |
| Detection Range | Combustible gases (methane as standard): 0 to 100% LEL 0 to 500 / 1000 / 2000 / 5000 ppm % Volume methane: 0 to 100% volume Oxygen (O2): 0 to 40% volume Hydrogen sulfide (H2S): 0 to 100 ppm Carbon monoxide (CO): 0 to 500 ppm |
| Accuracy Statement (Whichever is Greater) | Combustible gases (methane as standard): ±5% of reading or ±2% LEL (LEL mode only) % Volume methane: ±5% of reading or ±2% of full scale Oxygen (O2): ±0.5% O2 Hydrogen sulfide (H2S): ±5% of reading or ±2 ppm H2S Carbon monoxide (CO): ±5% of reading or ±5 ppm CO |
| Sampling Method | Internal sample pump, flow rate nominal 0.5 LPM (includes hydrophobic filter) |
| Display | Digital LCD with 7 segments, auto backlight during alarm |
| Alarms Types | Gas alarms: 1st and 2nd, STEL, TWA (user adjustable) and OVER Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error |
| Alarm Methods | Gas alarms: Flashing lights, two tone buzzer, and vibration Trouble alarms: Flashing lights, trouble displayed, intermittent buzzer, and vibration |
| Operating Conditions | Temperature: -4 to 122°F (-20 to 50°C) Humidity: 0 to 95% RH, non-condensing |
| Response Time | Within 30 seconds (T90) |
| Continuous Operation (at 70°F (21°C)) | Alkaline battery: 15 hours Li-ion battery: 10 hours |
| Power Source | Li-ion battery pack, or 3 x AA Alkaline battery pack (interchangeable) |
| Safety Rating | ATEX, TIIS, IECEx, CE, CSA classified (as standard), as intrinsically safe Class I, Division 1, Groups A, B, C, D |
| Dimensions | Approximately 5.6 x 2.8 x 1.6" (143 x 71 x 43 mm) |
| Weight | Approximately 0.77 lbs (approximately 350 g) |
| Detection Principle | Combustible gases (methane as standard): Catalytic combustion % Volume methane: Thermal conductivity Oxygen (O2): Galvanic cell Hydrogen sulfide (H2S): Electrochemical cell Carbon monoxide (CO): Electrochemical cell |
| Detection Range | Combustible gases (methane as standard): 0 to 100% LEL 0 to 500 / 1000 / 2000 / 5000 ppm % Volume methane: 0 to 100% volume Oxygen (O2): 0 to 40% volume Hydrogen sulfide (H2S): 0 to 100 ppm Carbon monoxide (CO): 0 to 500 ppm |
| Accuracy Statement (Whichever is Greater) | Combustible gases (methane as standard): ±5% of reading or ±2% LEL (LEL mode only) % Volume methane: ±5% of reading or ±2% of full scale Oxygen (O2): ±0.5% O2 Hydrogen sulfide (H2S): ±5% of reading or ±2 ppm H2S Carbon monoxide (CO): ±5% of reading or ±5 ppm CO |
| Sampling Method | Internal sample pump, flow rate nominal 0.5 LPM (includes hydrophobic filter) |
| Display | Digital LCD with 7 segments, auto backlight during alarm |
| Alarms Types | Gas alarms: 1st and 2nd, STEL, TWA (user adjustable) and OVER Trouble alarms: Sensor connection, low battery, low flow, circuit trouble and calibration error |
| Alarm Methods | Gas alarms: Flashing lights, two tone buzzer, and vibration Trouble alarms: Flashing lights, trouble displayed, intermittent buzzer, and vibration |
| Operating Conditions | Temperature: -4 to 122°F (-20 to 50°C) Humidity: 0 to 95% RH, non-condensing |
| Response Time | Within 30 seconds (T90) |
| Continuous Operation (at 70°F (21°C)) | Alkaline battery: 15 hours Li-ion battery: 10 hours |
| Power Source | Li-ion battery pack, or 3 x AA Alkaline battery pack (interchangeable) |
| Safety Rating | ATEX, TIIS, IECEx, CE, CSA classified (as standard), as intrinsically safe Class I, Division 1, Groups A, B, C, D |
| Dimensions | Approximately 5.6 x 2.8 x 1.6" (143 x 71 x 43 mm) |
| Weight | Approximately 0.77 lbs (approximately 350 g) |
.svg)
